Chinese Journal of Chemical Engineering ›› 2020, Vol. 28 ›› Issue (12): 2955-2967.DOI: 10.1016/j.cjche.2020.07.003
• Fluid Dynamics and Transport Phenomena • Next Articles
Yefeng Zhou1, Yifan Han1, Yujian Lu1, Hongcun Bai2, Xiayi Hu1, Xincheng Zhang1, Fanghua Xie1, Xiao Luo3, Jingdai Wang4, Yongrong Yang4
Yefeng Zhou1, Yifan Han1, Yujian Lu1, Hongcun Bai2, Xiayi Hu1, Xincheng Zhang1, Fanghua Xie1, Xiao Luo3, Jingdai Wang4, Yongrong Yang4
|  J. Chen, W. Xu, H. Zuo, X. Wu, J. E, T. Wang, F. Zhang, N. Lu, System development and environmental performance analysis of a solar-driven supercritical water gasification pilot plant for hydrogen production using life cycle assessment approach, Energy Convers. Manag. 184(2019) 60-73.
 J. Luis Míguez, J. Porteiro, R. Pérez-Orozco, D. Patiño, S. Rodíguez, Evolution of CO2 capture technology between 2007 and 2017 through the study of patent activity, Appl. Energy 211(2018) 1282-1296.
 F. Chu, L. Yang, X. Du, Y. Yang, Mass transfer and energy consumption for CO2 absorption by ammonia solution in bubble column, Appl. Energy 190(2017) 1068-1080.
 T. Thummakul, D. Gidaspow, P. Piumsomboon, B. Chalermsinsuwan, CFD simulation of CO2 sorption on K2CO3 solid sorbent in novel high flux circulating-turbulent fluidized bed riser:Parametric statistical experimental design study, Appl. Energy 190(2017) 122-134.
 L. Liu, H. Chen, E. Shiko, X. Fan, Y. Zhou, G. Zhang, X. Luo, X. Hu, Low-cost DETA impregnation of acid-activated sepiolite for CO2 capture, Chem. Eng. J. 353(2018) 940-948.
 M. Wang, A. Lawal, P. Stephenson, J. Sidders, C. Ramshaw, Post-combustion CO2 capture with chemical absorption:A state-of-the-art review, Chem. Eng. Res. Des. 89(9) (2011) 1609-1624.
 D.Y.C. Leung, G. Caramanna, M.M. Maroto-Valer, An overview of current status of carbon dioxide capture and storage technologies, Renew. Sust. Energ. Rev. 39(2014) 426-443.
 C. Zhao, X. Chen, C. Zhao, CO2 absorption using dry potassium-based sorbents with different supports, Energy Fuel 23(9) (2009) 4683-4687.
 S.T. Bararpour, D. Karami, N. Mahinpey, Post-combustion CO2 capture using supported K2CO3:Comparing physical mixing and incipient wetness impregnation preparation methods, Chem. Eng. Res. Des. 137(2018) 319-328.
 Y. Ju, C.-H. Lee, Dynamic modeling of a dual fluidized-bed system with the circulation of dry sorbent for CO2 capture, Appl. Energy 241(2019) 640-651.
 C. Zhao, X. Chen, E.J. Anthony, X. Jiang, L. Duan, Y. Wu, W. Dong, C. Zhao, Capturing CO2 in flue gas from fossil fuel-fired power plants using dry regenerable alkali metal-based sorbent, Prog. Energy Combust. Sci. 39(6) (2013) 515-534.
 P. Wang, J. Sun, Y. Guo, C. Zhao, W. Li, G. Wang, S. Lei, P. Lu, Structurally improved, urea-templated, K2CO3-based sorbent pellets for CO2 capture, Chem. Eng. J. 374(2019) 20-28.
 A. Jayakumar, A. Gomez, N. Mahinpey, Post-combustion CO2 capture using solid K2CO3:Discovering the carbonation reaction mechanism, Appl. Energy 179(2016) 531-543.
 Y. Guo, C. Zhao, J. Sun, W. Li, P. Lu, Facile synthesis of silica aerogel supported K2CO3 sorbents with enhanced CO2 capture capacity for ultra-dilute flue gas treatment, Fuel 215(2018) 735-743.
 H. Hayashi, N. Furuyashiki, S. Sugiyama, S. Hirano, N. Shigemoto, T. Nonaka, Efficient recovery of carbon dioxide from flue gases of coal-fired power plants by cyclic fixedbed operations over K2CO3-on-carbon, Ind. Eng. Chem. Res. 37(1998) 185-191.
 C. Zhao, X. Chen, C. Zhao, K2CO3/Al2CO3 for capturing CO2 in flue gas from power plants. Part 2:Regeneration behaviors of K2CO3/Al2CO3, Energy Fuel 26(2) (2012) 1406-1411.
 O.-a. Jaiboon, B. Chalermsinsuwan, L. Mekasut, P. Piumsomboon, Effect of flow patterns/regimes on CO2 capture using K2CO3 solid sorbent in fluidized bed/circulating fluidized bed, Chem. Eng. J. 219(2013) 262-272.
 C. Zhao, X. Chen, C. Zhao, Multiple-cycles behavior of K2CO3/Al2CO3 for CO2 capture in a fluidized-bed reactor, Energy Fuel 24(2) (2010) 1009-1012.
 M. Nouri, G. Rahpaima, M.M. Nejad, M. Imani, Computational simulation of CO2 capture process in a fluidized-bed reactor, Comput. Chem. Eng. 108(2018) 1-10.
 C.-K. Yi, S.-H. Jo, Y. Seo, J. Lee, C.K. Ryu, Continuous operation of the potassium-based dry sorbent CO2 capture process with two fluidized-bed reactors, Int. J. Greenh. Gas Control 1(1) (2007) 31-36.
 C. Sakaunnapaporn, B. Chalermsinsuwan, Computational fluid dynamics model of CO2 capture in fluidized bed reactors operating parameter optimization, Energy Procedia 138(2017) 518-523.
 S. Yang, L. Zhang, K. Luo, J. Chew, DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum, Powder Technol. 330(2018) 93-104.
 C. Zi, J. Sun, Y. Yang, et al., CFD simulation and hydrodynamics characterization of solids oscillation behavior in a circulating fluidized bed with sweeping bend return, Chem. Eng. J. 307(2017) 604-620.
 C.G. Philippsen, A.C.F. Vilela, L.D. Zen, Fluidized bed modeling applied to the analysis of processes:Review and state of the art, J. Mater. Res. Tech. 4(2) (2015) 208-216.
 A. Boemer, H. Qi, U. Renz, Eulerian simulation of bubble formation at a jet in a twodimensional fluidized bed, Int. J. Multiphase Flow 23(5) (1997) 927-944.
 F.V.S. Lopes, C.A. Grande, A.E. Rodrigues, Activated carbon for hydrogen purification by pressure swing adsorption:Multicomponent breakthrough curves and PSA performance, Chem. Eng. Sci. 66(3) (2011) 303-317.
 F. Augier, C. Laroche, E. Brehon, Application of computational fluid dynamics to fixed bed adsorption calculations:Effect of hydrodynamics at laboratory and industrial scale, Sep. Purif. Technol. 63(2) (2008) 466-474.
 T. Li, A. Gel, S. Pannala, M. Shahnam, M. Syamlal, CFD simulations of circulating fluidized bed risers, part I:Grid study, Powder Technol. 254(2014) 170-180.
 J. Cardoso, V. Silva, D. Eusébio, P. Brito, R.M. Boloy, L. Tarelho, J.L. Silveira, Comparative 2D and 3D analysis on the hydrodynamics behaviour during biomass gasification in a pilot-scale fluidized bed reactor, Renew. Energy 131(2019) 713-729.
 T. Li, J. Grace, X. Bi, Study of wall boundary condition in numerical simulations of bubbling fluidized beds, Powder Technol. 203(3) (2010) 447-457.
 N. Reuge, L. Cadoret, C. Coufort-Saudejaud, S. Pannala, M. Syamlal, B. Caussat, Multifluid Eulerian modeling of dense gas-solids fluidized bed hydrodynamics:Influence of the dissipation parameters, Chem. Eng. Sci. 63(22) (2008) 5540-5551.
 T.W. Asegehegn, M. Schreiber, H.J. Krautz, Influence of two- and three-dimensional simulations on bubble behavior in gas-solid fluidized beds with and without immersed horizontal tubes, Powder Technol. 219(2012) 9-19.
 N. Xie, F. Battaglia, S. Pannala, Effects of using two-versus three-dimensional computational modeling of fluidized beds:part II, Budget analysis, Powder Technol. 182(1) (2008) 14-24.
 E. Esmaili, N. Mahinpey, Adjustment of drag coefficient correlations in three dimensional CFD simulation of gas-solid bubbling fluidized bed, Adv. Eng. Softw. 42(6) (2011) 375-386.
 X. Lv, H. Li, Q. Zhu, Simulation of gas-solid flow in 2D/3D bubbling fluidized beds by combining the two-fluid model with structure-based drag model, Chem. Eng. J. 236(2014) 149-157.
 M. Ayobi, S. Shahhosseini, Y. Behjat, Computational and experimental investigation of CO2 capture in gas-solid bubbling fluidized bed, Journal of the Taiwan Institute of Chemical Engineers 45(2) (2014) 421-430.
 S. Wang, Q. Wang, J. Chen, G. Liu, H. Lu, L. Sun, Assessment of CO2 capture using potassium-based sorbents in circulating fluidized bed reactor by multiscale modeling, Fuel 164(2016) 66-72.
 J. Chang, K. Zhang, Y. Yang, B. Wang, Q. Sun, Computational investigation of solid sorbent carbon dioxide capture in a fluidized bed reactor, Powder Technol. 275(2015) 94-104.
 E. Abbasi, J. Abbasian, H. Arastoopour, CFD-PBE numerical simulation of CO2 capture using MgO-based sorbent, Powder Technol. 286(2015) 616-628.
 H. Pan, X.Z. Chen, X.F. Liang, L.T. Zhu, Z.H. Luo, CFD simulations of gas-liquid-solid flow in fluidized bed reactors-a review, Powder Technol. 299(2016) 235-258.
 T. Kawaguchi, T. Tanaka, Y. Tsuji, Numerical simulation of two-dimensional fluidized beds using the discrete element method (comparison between the two- and threedimensional models), Powder Technol. (1998) 129-138.
 Y. Ju, H.T. Oh, C.H. Lee, Sensitivity analysis of CO2 capture process in cyclic fluidizedbed with regeneration of solid sorbent, Chemical Engineering Journal 379(2020) 122291.
 B. Chalermsinsuwan, P. Piumsomboon, D. Gidaspow, A computational fluid dynamics design of a carbon dioxide sorption circulating fluidized bed, AIChE J. 56(11) (2010) 2805-2824.
 V. Rossbach, J. Utzig, R.K. Decker, D. Noriler, C. Soares, W. Martignoni, H. Meier, Gassolid flow in a ring-baffled CFB riser:Numerical and experimental analysis, Powder Technol. 345(2019) 521-531.
 M.W. Seo, T.D.B. Nguyen, Y.I. Lim, S.D. Kim, S. Park, B.H. Song, Y.J. Kim, Solid circulation and loop-seal characteristics of a dual circulating fluidized bed:Experiments and CFD simulation, Chem. Eng. J. 168(2) (2011) 803-811.
 Q. Qin, H. Liu, R. Zhang, L. Ling, M. Fan, B. Wang, Application of density functional theory in studying CO2 capture with TiO2-supported K2CO3 being an example, Appl. Energy 231(2018) 167-178.
 A.N. Antzara, A. Arregi, E. Heracleous, A. Lemonidou, In-depth evaluation of a ZrO2 promoted CaO-based CO2 sorbent in fluidized bed reactor tests, Chem. Eng. J. 333(2018) 697-711.
 T. Li, J.-F. Dietiker, L. Shadle, Comparison of full-loop and riser-only simulations for a pilot-scale circulating fluidized bed riser, Chem. Eng. Sci. 120(2014) 10-21.
 Y. Lu, Y. Zhou, L. Yang, X. Hu, X. Luo, H. Chen, Verification of optimal models for 2D-full loop simulation of circulating fluidized bed, Adv. Powder Technol. 29(11) (2018) 2765-2774.
 E. Ghadirian, J. Abbasian, H. Arastoopour, CFD simulation of gas and particle flow and a carbon capture process using a circulating fluidized bed (CFB) reacting loop, Powder Technol. 344(2019) 27-35.
 J. Cardoso, V. Silva, D. Eusébio, P. Brito, L. Tarelho, Improved numerical approaches to predict hydrodynamics in a pilot-scale bubbling fluidized bed biomass reactor:A numerical study with experimental validation, Energy Convers. Manag. 156(2018) 53-67.
 Y.-K. Park, H. Seo, K. Kim, D. Kim, D. Min, H. Kim, W. Choi, N. Kang, S. Park, An energy exchangeable solid-sorbent based multi-stage fluidized bed process for CO2 capture, Energy Procedia 114(2017) 2410-2420.
 R.W. Breault, E.D. Huckaby, Parametric behavior of a CO2 capture process:CFD simulation of solid-sorbent CO2 absorption in a riser reactor, Appl. Energy 112(2013) 224-234.
 B. Zhao, Q. Zhou, J. Wang, J. Li, CFD study of exit effect of high-density CFB risers with EMMS-based two-fluid model, Chem. Eng. Sci. 134(2015) 477-488.
 M.A.E. Soberanis, A. Bassam, W. Mérida, Analysis of energy dissipation and turbulence kinetic energy using high frequency data for wind energy applications, J. Wind Eng. Ind. Aerodyn. 151(2016) 137-145.
 C. Gorlé, J. van Beeck, P. Rambaud, G. Van Tendeloo, CFD modelling of small particle dispersion:The influence of the turbulence kinetic energy in the atmospheric boundary layer, Atmos. Environ. 43(3) (2009) 673-681.
 K. Craig, R. Buckholz, G. Domoto, Effect of shear surface boundaries on stress for shearing flow of dry metal powders-An experimental study, Journal of Tribologytransactions of The Asme-J TRIBOL-TRANS ASME 109(1987) 232.
 Savage, B. Stuart, S. Mckoen, Shear stresses developed during rapid shear of concentrated suspensions of large spherical particles between concentric cylinders, J. Fluid Mech. 127(1983) 453-472.
 S.J. Zhang, A.B. Y., Computational investigation of slugging behaviour in gas-fluidised beds.pdf, Powder Technology 123(2-3) (2002) 147-165.
 T. Li, Y. Zhang, J.R. Grace, X. Bi, Numerical investigation of gas mixing in gas-solid fluidized beds, AIChE J. 106(2010) 35-37.
 J. Jenkins, M. Louge, On the flux of fluctuation energy in a collisional grain flow at a flat, frictional wall, Phys. Fluids 9(1997) 2835-2840.
 C. Wang, J. Zhu, Developments in the understanding of gas-solid contact efficiency in the circulating fluidized bed riser reactor:A review, Chin. J. Chem. Eng. 24(1) (2016) 53-62.
 S. Cloete, S.T. Johansen, S. Amini, Investigation into the effect of simulating a 3D cylindrical fluidized bed reactor on a 2D plane, Powder Technol. 239(2013) 21-35.
 T. Li, S. Pannala, M. Shahnam, CFD simulations of circulating fluidized bed risers, part II, Evaluation of differences between 2D and 3D simulations, Powder Technol. 254(2014) 115-124.
 Y. Guo, C. Zhao, C. Li, Y. Wu, CO2 sorption and reaction kinetic performance of K2CO3/AC in low temperature and CO2 concentration, Chem. Eng. J. 260(2015) 596-604.
 J.M. Coulson, J.F. Richardson, Flow of fluids through granular beds and packed column, Chem. Eng. 2(1968) 1-47.
 Q. Chen, F. Rosner, A. Rao, Scott. Samuelsen, Simulation of elevated temperature solid sorbent CO2 capture for pre-combustion applications using computational fluid dynamics, Appl. Energy 237(2019) 314-325.
|||Tianpeng LiZhou, Jiajia Luo, Tiefeng Wang. Enhancement of acetylene and ethylene yields in partially decoupled oxidation of ethane by changing the composition of heat carrier [J]. Chinese Journal of Chemical Engineering, 2022, 47(7): 71-78.|
|||Zewen Chen, Yongjun Wu, Jian Wang, Peicheng Luo. Study on the solid–liquid suspension behavior in a tank stirred by the long-short blades impeller [J]. Chinese Journal of Chemical Engineering, 2022, 47(7): 79-88.|
|||Liying Chen, Junheng Guo, Wenpeng Li, Shuchun Zhao, Wei Li, Jinli Zhang. A numerical study of mixing intensification for highly viscous fluids in multistage rotor–stator mixers [J]. Chinese Journal of Chemical Engineering, 2022, 47(7): 218-230.|
|||Zijun Li, Shubo Wang, Sai Yao, Xueke Wang, Weiwei Li, Tong Zhu, Xiaofeng Xie. Experimental and numerical study on improvement performance by wave parallel flow field in a proton exchange membrane fuel cell [J]. Chinese Journal of Chemical Engineering, 2022, 45(5): 90-102.|
|||Yongjun Wu, Pan You, Peicheng Luo. Effect of pitched short blades on the flow characteristics in a stirred tank with long-short blades impeller [J]. Chinese Journal of Chemical Engineering, 2022, 45(5): 143-152.|
|||Ning Liu, Xingping Liu, Fumin Wang, Feng Xin, Mingshuai Sun, Yi Zhai, Xubin Zhang. CFD simulation study of the effect of baffles on the fluidized bed for hydrogenation of silicon tetrachloride [J]. Chinese Journal of Chemical Engineering, 2022, 45(5): 219-228.|
|||He Yang, Aqiang Chen, Shujun Geng, Jingcai Cheng, Fei Gao, Qingshan Huang, Chao Yang. Influences of fluid physical properties, solid particles, and operating conditions on the hydrodynamics in slurry reactors [J]. Chinese Journal of Chemical Engineering, 2022, 44(4): 51-71.|
|||Narjes Hemati Alam, Eslam Kashi, Razieh Habibpour. Computational fluid dynamics simulation of gas dispersion in complex facilities using Kit Fox field experiments: Validation and statistical evaluation [J]. Chinese Journal of Chemical Engineering, 2022, 44(4): 412-423.|
|||Huina Wang, Xiaoxia Duan, Xin Feng, Zai-Sha Mao, Chao Yang. Effect of impeller type and scale-up on spatial distribution of shear rate in a stirred tank [J]. Chinese Journal of Chemical Engineering, 2022, 42(2): 351-363.|
|||Wen-Cong Chen, Ya-Wei Fan, Liang-Liang Zhang, Bao-Chang Sun, Yong Luo, Hai-Kui Zou, Guang-Wen Chu, Jian-Feng Chen. Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review [J]. Chinese Journal of Chemical Engineering, 2022, 41(1): 85-108.|
|||Wang Du, Liping Ma, Jing Yang, Wei Zhang, Ran Ao. Experimental and numerical simulation of lignite chemical looping gasification with phosphogypsum as oxygen carrier in a fluidized bed [J]. Chinese Journal of Chemical Engineering, 2021, 37(9): 197-207.|
|||Xifan Duan, Zhiguo Yuan, Youzhi Liu, Hangtian Li, Weizhou Jiao. Numerical simulation and experimental study of the characteristics of packing feature size on liquid flow in a rotating packed bed [J]. Chinese Journal of Chemical Engineering, 2021, 34(6): 22-31.|
|||Yanni Chi, Rui Zhang, Xianghai Meng, Jian Xu, Wei Du, Haiyan Liu, Zhichang Liu. Numerical simulation of two-phase flow and droplet breakage of glycerin-water mixture and kerosene in the cyclone reactor [J]. Chinese Journal of Chemical Engineering, 2021, 34(6): 150-159.|
|||Bay Van Tran, Son Ich Ngo, Young-Il Lim, Keon Bae, Dong Hyun Lee, Kang-Seok Go, Nam-Sun Nho. Hydrodynamics of air-kerosene bubble column under elevated pressure in homogeneous flow regime [J]. Chinese Journal of Chemical Engineering, 2021, 33(5): 190-202.|
|||Qiaoyi Xu, Wenli Du, Jinjin Xu, Jikai Dong. Neural network-based source tracking of chemical leaks with obstacles [J]. Chinese Journal of Chemical Engineering, 2021, 33(5): 211-220.|