%0 Journal Article %A Hengjun Gai %A Kaiqiang Lin %A Yirong Feng %A Meng Xiao %A Kai Guo %A Hongbing Song %T Conceptual design of an extractive distillation process for the separation of azeotropic mixture of n-butanol-isobutanol-water %D 2018 %R 10.1016/j.cjche.2018.05.003 %J Chinese Journal of Chemical Engineering %P 2040-2047 %V 26 %N 10 %X In many chemical processes, large amounts of wastewater containing butanol and isobutanol are produced. Given that n-butanol-isobutanol-water can form triple azeotrope, high-purity butanol cannot be recovered from the wastewater by ordinary distillation. To economically and effectively recover butanol from this kind of wastewater, 1,4-butanediol is selected as an extractant to break the formation of the azeotropes, and a doubleeffect extractive distillation process is proposed. The conceptual design of the proposed process is accomplished based on process simulation. With the proposed process, the purity of recovered butanol and water is greater than 99.99 wt%. In comparison with the conventional azeotropic distillation process, economic analysis shows that the operating cost of the proposed process is lower:when the capacity of wastewater treatment is 100 t·h-1, the total operating cost decreases by 5.385×106 USD per year, and the total annual cost of the new process decreases by 5.249×106 USD per year. In addition, in the extractive distillation system, variable effects on separation purities and cost are more complex than those in the ordinary distillation system. The method and steps to optimize the key variables of the extractive distillation system are also discussed in this paper and can provide reference for similar studies. %U https://cjche.cip.com.cn/EN/10.1016/j.cjche.2018.05.003