%0 Journal Article %A Nur Atirah Ibrahim %A Muhammad Abbas Ahmad Zaini %T Microwave-assisted solvent extraction of castor oil from castor seeds %D 2018 %R 10.1016/j.cjche.2018.07.009 %J Chinese Journal of Chemical Engineering %P 2516-2522 %V 26 %N 12 %X This study was aimed at evaluating the physicochemical properties and oxidation stability of castor oil using microwave-assisted solvent extraction (MAE). MAE was performed using 5% ethanol in hexane as solvent at different extraction times, power intensities and solvent-to-feed (S/F, ml of solvent to gram of feed) ratios. The process parameters were optimized by statistical approach using historical data design of response surface method (RSM). The oils were characterized for yield, physicochemical properties, dielectric properties and oxidation stability, and comparison was also made with oil extracted using Soxhlet method. Results show that the maximum oil yield of 37% was obtained at 20 min with microwave power intensity of 330 W and S/F ratio of 20. The main fatty acid composition of castor oil is ricinoleic acid. The density, refractive index, dielectric properties and oxidation stability of oils are not affected by the extraction methods and extraction parameters of MAE. However, the MAE-extracted oil is more viscous compared to that by Soxhlet method. With extra caution on oil oxidation, MAE could be a promising solvent extraction method with an 86% less in processing time and a higher yield. %U https://cjche.cip.com.cn/EN/10.1016/j.cjche.2018.07.009