SCI和EI收录∣中国化工学会会刊

Chin.J.Chem.Eng. ›› 2015, Vol. 23 ›› Issue (5): 842-846.DOI: 10.1016/j.cjche.2014.09.049

• ENERGY, RESOURCES AND ENVIRONMENTAL TECHNOLOGY • Previous Articles     Next Articles

Key factors governing alkaline pretreatment of waste activated sludge

Xianli Shi, Li Deng, Fangfang Sun, Jieyu Liang, Xu Deng   

  1. College of Life Sciences, Shenzhen Key Laboratory of Marine Bioresources and Ecology, Shenzhen University, Shenzhen 518060, China
  • Received:2014-02-24 Revised:2014-09-09 Online:2015-06-26 Published:2015-05-28
  • Contact: Xu Deng
  • Supported by:

    Supported by the National Natural Science Foundation of China (51078234), Shenzhen R&D fund (JCYJ20140418193546101) and Shenzhen University R&D fund (T201203).

Key factors governing alkaline pretreatment of waste activated sludge

Xianli Shi, Li Deng, Fangfang Sun, Jieyu Liang, Xu Deng   

  1. College of Life Sciences, Shenzhen Key Laboratory of Marine Bioresources and Ecology, Shenzhen University, Shenzhen 518060, China
  • 通讯作者: Xu Deng
  • 基金资助:

    Supported by the National Natural Science Foundation of China (51078234), Shenzhen R&D fund (JCYJ20140418193546101) and Shenzhen University R&D fund (T201203).

Abstract: Alkaline pretreatment is an effective technology to disintegrate sewage sludge, where alkali dosage and sludge concentration are two important factors. pH value or alkali concentration is usually adjusted in order to determine a proper dosage of alkali. Our work has found that this is not a good strategy. A new parameter, the ratio of alkali to sludge (Ra/s), is more sensitive in controlling the alkali dosage. The sludge concentration Cs and retention time t are two other important factors to consider. The validity of these arguments is confirmed with modeling and experiments. The individual effect of Ra/s, Cs and t was studied separately. Then the combined effect of these three factors was evaluated. The sludge disintegration degree of 44.7% was achieved with the optimized factors. Furthermore, an alkaline-microwave combined pretreatment process was carried out under these optimized conditions. A high disintegration degree of 62.3% was achieved while the energy consumption of microwave was much lower than previously reported.

Key words: Waste activated sludge, Alkaline pretreatment, Waste treatment, Optimization, Biodegradation, Bioprocess design

摘要: Alkaline pretreatment is an effective technology to disintegrate sewage sludge, where alkali dosage and sludge concentration are two important factors. pH value or alkali concentration is usually adjusted in order to determine a proper dosage of alkali. Our work has found that this is not a good strategy. A new parameter, the ratio of alkali to sludge (Ra/s), is more sensitive in controlling the alkali dosage. The sludge concentration Cs and retention time t are two other important factors to consider. The validity of these arguments is confirmed with modeling and experiments. The individual effect of Ra/s, Cs and t was studied separately. Then the combined effect of these three factors was evaluated. The sludge disintegration degree of 44.7% was achieved with the optimized factors. Furthermore, an alkaline-microwave combined pretreatment process was carried out under these optimized conditions. A high disintegration degree of 62.3% was achieved while the energy consumption of microwave was much lower than previously reported.

关键词: Waste activated sludge, Alkaline pretreatment, Waste treatment, Optimization, Biodegradation, Bioprocess design