Chinese Journal of Chemical Engineering ›› 2023, Vol. 54 ›› Issue (2): 331-342.DOI: 10.1016/j.cjche.2022.02.021
Previous Articles Next Articles
Jihui Li, Bingjian Zhang, Yidan Shu
Received:
2021-11-25
Revised:
2022-01-28
Online:
2023-05-11
Published:
2023-02-28
Contact:
Yidan Shu,E-mail:shuyd@mail.sysu.edu.cn
Supported by:
Jihui Li, Bingjian Zhang, Yidan Shu
通讯作者:
Yidan Shu,E-mail:shuyd@mail.sysu.edu.cn
基金资助:
Jihui Li, Bingjian Zhang, Yidan Shu. Simulation of gas-solid adsorption process considering particle-size distribution[J]. Chinese Journal of Chemical Engineering, 2023, 54(2): 331-342.
Jihui Li, Bingjian Zhang, Yidan Shu. Simulation of gas-solid adsorption process considering particle-size distribution[J]. 中国化学工程学报, 2023, 54(2): 331-342.
[1] M. Yan, Y.Z. Li, G.F. Chen, L.Q. Zhang, Y.P. Mao, C.Y. Ma, A novel flue gas pre-treatment system of post-combustion CO2 capture in coal-fired power plant, Chem. Eng. Res. Des. 128 (2017) 331–341. [2] Z.J. Liu, D.W. Zhang, T.H. Wei, L.Q. Wang, X.J. Li, B.X. Liu, Adsorption characteristics of formaldehyde on nitrogen doped graphene-based single atom adsorbents: A DFT study, Appl. Surf. Sci. 493 (2019) 1260–1267. [3] H. Xiang, X.L. Fan, F.R. Siperstein, Understanding ethane/ethylene adsorption selectivity in ethane-selective microporous materials, Sep. Purif. Technol. 241 (2020) 116635. [4] S.H. Yoon, Y.N. Chun, Development of a novel Volumetric Matrix Dump Combustor for VOC reduction, Chem. Eng. Res. Des. 122 (2017) 308–315. [5] K.S. Hwang, J.H. Jun, W.K. Lee, Fixed-bed adsorption for bulk component system. Non-equilibrium, non-isothermal and non-adiabatic model, Chem. Eng. Sci. 50 (5) (1995) 813–825. [6] R. Ben-Mansour, M.A. Habib, O.E. Bamidele, M. Basha, N.A.A. Qasem, A. Peedikakkal, T. Laoui, M. Ali, Carbon capture by physical adsorption: Materials, experimental investigations and numerical modeling and simulations - A review, Appl. Energy 161 (2016) 225–255. [7] W.W. Li, S.K. Wei, W.Z. Jiao, G.S. Qi, Y.Z. Liu, Modelling of adsorption in rotating packed bed using artificial neural networks (ANN), Chem. Eng. Res. Des. 114 (2016) 89–95. [8] M.A. Al-Ghouti, D.A. Da'ana, Guidelines for the use and interpretation of adsorption isotherm models: A review, J. Hazard. Mater. 393 (2020) 122383. [9] M. Nouri, G. Rahpaima, M.M. Nejad, M. Imani, Computational simulation of CO2 capture process in a fluidized-bed reactor, Comput. Chem. Eng. 108 (2018) 1–10. [10] A. Golchoobi, H. Pahlavanzadeh, Molecular simulation, experiments and modelling of single adsorption capacity of 4A molecular sieve for CO2-CH4 separation, Sep. Sci. Technol. 51 (14) (2016) 2318–2325. [11] R. Ben-Mansour, M. Basha, N.A.A. Qasem, Multicomponent and multi-dimensional modeling and simulation of adsorption-based carbon dioxide separation, Comput. Chem. Eng. 99 (2017) 255–270. [12] S.S. Chen, C.L. Qin, T. Deng, J.J. Yin, J.Y. Ran, Particle-scale modeling of the simultaneous carbonation and sulfation in calcium looping for CO2 capture, Sep. Purif. Technol. 252 (2020) 117439. [13] B.R. Müller, Effect of particle size and surface area on the adsorption of albumin-bonded bilirubin on activated carbon, Carbon 48 (12) (2010) 3607–3615. [14] G. Carta, A. Ubiera, Particle-size distribution effects in batch adsorption, AIChE J. 49 (12) (2003) 3066–3073. [15] H. Abir, M. Sheintuch, Atomistic calculation of adsorption in activated carbon with pore-size distribution, J. Colloid Interface Sci. 342 (2) (2010) 445–454. [16] W.Y. Pang, Z.H. Jin, Methane absolute adsorption in kerogen nanoporous media with realistic continuous pore size distributions, Energy Fuels 34 (10) (2020) 12158–12172. [17] V. Quedeville, H. Ouazaite, B. Polizzi, R.O. Fox, P. Villedieu, P. Fede, F. Létisse, J. Morchain, A two-dimensional population balance model for cell growth including multiple uptake systems, Chem. Eng. Res. Des. 132 (2018) 966–981. [18] M. Hasan, S. Palaniandy, M. Hilden, M. Powell, Simulating product size distribution of an industrial scale VertiMill® using a time-based population balance model, Miner. Eng. 127 (2018) 312–317. [19] C.Y. Ma, X.Z. Wang, K.J. Roberts, Morphological population balance for modeling crystal growth in face directions, AIChE J. 54 (1) (2008) 209–222. [20] Y.D. Shu, J.J. Liu, Y. Zhang, X.Z. Wang, A multi-stage multi-component transfer rate morphological population balance model for crystallization processes, Cryst Eng Comm 21 (28) (2019) 4212–4220. [21] Y.D. Shu, J.J. Liu, Y. Zhang, X.Z. Wang, Considering nucleation, breakage and aggregation in morphological population balance models for crystallization processes, Comput. Chem. Eng. 136 (2020) 106781. [22] D. Ramkrishna, M.R. Singh, Population balance modeling: Current status and future prospects, Annu. Rev. Chem. Biomol. Eng. 5 (2014) 123–146. [23] C.H. Liaw, J.S.P. Wang, R.A. Greenkorn, K.C. Chao, Kinetics of fixed-bed adsorption: A new solution, AIChE J. 25 (2) (1979) 376–381. [24] D.H. Bangham, W. Sever, XCIII. An experimental investigation of the dynamical equation of the process of gas-sorption, Lond. Edinb. Dublin Philos. Mag. J. Sci. 49 (293) (1925) 935–944. [25] T. Vermeulen, Theory for irreversible and constant-pattern solid diffusion, Ind. Eng. Chem. 45 (8) (1953) 1664–1670. [26] R. Gunawan, I. Fusman, R.D. Braatz, High resolution algorithms for multidimensional population balance equations, AIChE J. 50 (11) (2004) 2738–2749. [27] B. van Leer, Towards the ultimate conservative difference scheme. II. Monotonicity and conservation combined in a second-order scheme, J. Comput. Phys. 14 (4) (1974) 361–370. [28] C.J. Na, M.J. Yoo, D.C.W. Tsang, H.W. Kim, K.H. Kim, High-performance materials for effective sorptive removal of formaldehyde in air, J. Hazard. Mater. 366 (2019) 452–465. [29] P. Kowalczyk, P.A. Gauden, M. Wiśniewski, A.P. Terzyk, S. Furmaniak, A. Burian, K. Kaneko, A.V. Neimark, Atomic-scale molecular models of oxidized activated carbon fibre nanoregions: Examining the effects of oxygen functionalities on wet formaldehyde adsorption, Carbon 165 (2020) 67–81. [30] P.H. Huang, S.C. Hung, M.Y. Huang, Molecular dynamics investigations of liquid–vapor interaction and adsorption of formaldehyde, oxocarbons, and water in graphitic slit pores, Phys. Chem. Chem. Phys. 16 (29) (2014) 15289–15298. [31] J. Crank , The Mathematics of Diffusion , Clarendon Press , Oxford , 1975. [32] H. Wang, Y. Liu, Z. Li, X. Yang, Kinetic models and numerical simulation of SO2 adsorption on activated carbon, J. Chin. Coal. Soc. 40(1) (2015) 203-211. [33] S. Shin, J. Song, Modeling and simulations of the removal of formaldehyde using silver nano-particles attached to granular activated carbon, J. Hazard. Mater. 194 (2011) 385–392. [34] E.S. Rubin, IPCC special report on carbon dioxide capture and storage, economics & politics of climate change, RITE International Workshop on CO2 Geological Storage, Tokyo, Japan, 2005. [35] L.F.A.S. Zafanelli, A. Henrique, M. Karimi, A.E. Rodrigues, J.A.C. Silva, Single- and multicomponent fixed bed adsorption of CO2, CH4, and N2 in binder-free beads of 4A zeolite, Ind. Eng. Chem. Res. 59 (30) (2020) 13724–13734. [36] H. Ahn, J.H. Moon, S.H. Hyun, C.H. Lee, Diffusion mechanism of carbon dioxide in zeolite 4A and CaX pellets, Adsorption 10 (2) (2004) 111–128. [37] P.Y. Li, F.H. Tezel, Adsorption separation of N2, O2, CO2 and CH4 gases by β-zeolite, Microporous Mesoporous Mater. 98 (1–3) (2007) 94–101. [38] G.N. Nikolaidis, E.S. Kikkinides, M.C. Georgiadis, A model-based approach for the evaluation of new zeolite 13X-based adsorbents for the efficient post-combustion CO2 capture using P/VSA processes, Chem. Eng. Res. Des. 131 (2018) 362–374. [39] Y. Li, T.S. Chung, C. Cao, S. Kulprathipanja, The effects of polymer chain rigidification, zeolite pore size and pore blockage on polyethersulfone (PES)-zeolite A mixed matrix membranes, J. Membr. Sci. 260 (1–2) (2005) 45–55. [40] D. Panda, E.A. Kumar, S.K. Singh, Amine modification of binder-containing zeolite 4A bodies for post-combustion CO2 capture, Ind. Eng. Chem. Res. 58 (13) (2019) 5301–5313. [41] R. Seabra, A.M. Ribeiro, K. Gleichmann, A.F.P. Ferreira, A.E. Rodrigues, Adsorption equilibrium and kinetics of carbon dioxide, methane and nitrogen on binderless zeolite 4A adsorbents, Microporous Mesoporous Mater. 277 (2019) 105–114. [42] D.M. Ruthven, Principles of Adsorption and Adsorption Processes, Wiley, New York. (1984). [43] N. Haq, D.M. Ruthven, Chromatographic study of sorption and diffusion in 4A zeolite, J. Colloid Interface Sci. 112 (1) (1986) 154–163. |
[1] | Yingli Li, Zhishuncheng Li, Guangfei Qu, Rui Li, Shuaiyu Liang, Junhong Zhou, Wei Ji, Huiming Tang. Mechanism, behaviour and application of iron nitrate modified carbon nanotube composites for the adsorption of arsenic in aqueous solutions [J]. Chinese Journal of Chemical Engineering, 2023, 60(8): 26-36. |
[2] | Jing Huang, Honghui Cai, Qian Zhao, Yunpeng Zhou, Haibo Liu, Jing Wang. Dual-functional pyrene implemented mesoporous silicon material used for the detection and adsorption of metal ions [J]. Chinese Journal of Chemical Engineering, 2023, 60(8): 108-117. |
[3] | Lingli Chen, Yueting Shi, Sijun Xu, Junle Xiong, Fang Gao, Shengtao Zhang, Hongru Li. Enhanced adsorption of target branched compounds including antibiotic norfloxacin frameworks on mild steel surface for efficient protection: An experimental and molecular modelling study [J]. Chinese Journal of Chemical Engineering, 2023, 60(8): 212-227. |
[4] | Alexander Nti Kani, Evans Dovi, Aaron Albert Aryee, Runping Han, Zhaohui Li, Lingbo Qu. Mechanisms and reusability potentials of zirconium-polyaziridine-engineered tiger nut residue towards anionic pollutants [J]. Chinese Journal of Chemical Engineering, 2023, 60(8): 275-292. |
[5] | Yuan Liu, Hanting Xiong, Jingwen Chen, Shixia Chen, Zhenyu Zhou, Zheling Zeng, Shuguang Deng, Jun Wang. One-step ethylene separation from ternary C2 hydrocarbon mixture with a robust zirconium metal-organic framework [J]. Chinese Journal of Chemical Engineering, 2023, 59(7): 9-15. |
[6] | Hui Jiang, Zijian Zhao, Ning Yu, Yi Qin, Zhengwei Luo, Wenhua Geng, Jianliang Zhu. Synthesis, characterization, and performance comparison of boron using adsorbents based on N-methyl-D-glucosamine [J]. Chinese Journal of Chemical Engineering, 2023, 59(7): 16-31. |
[7] | Runze Chen, Yuran Chen, Xuemin Liang, Yapeng Kong, Yangyang Fan, Quan Liu, Zhenyu Yang, Feiying Tang, Johnny Muya Chabu, Maru Dessie Walle, Liqiang Wang. Oxidative exfoliation of spent cathode carbon: A two-in-one strategy for its decontamination and high-valued application [J]. Chinese Journal of Chemical Engineering, 2023, 59(7): 262-269. |
[8] | Shanghong Ma, Haitao Zhang, Jianbo Qu, Xiuzhong Zhu, Qingfei Hu, Jianyong Wang, Peng Ye, Futao Sai, Shiwei Chen. Preparation of waterborne polyurethane/β-cyclodextrin composite nanosponge by ion condensation method and its application in removing of dyes from wastewater [J]. Chinese Journal of Chemical Engineering, 2023, 58(6): 124-136. |
[9] | Yueting Shi, Junhai Zhao, Lingli Chen, Hongru Li, Shengtao Zhang, Fang Gao. Double open mouse-like terpyridine parts based amphiphilic ionic molecules displaying strengthened chemical adsorption for anticorrosion of copper in sulfuric acid solution [J]. Chinese Journal of Chemical Engineering, 2023, 57(5): 233-246. |
[10] | Jian Wang, Yuanhui Shen, Donghui Zhang, Zhongli Tang, Wenbin Li. Integrated vacuum pressure swing adsorption and Rectisol process for CO2 capture from underground coal gasification syngas [J]. Chinese Journal of Chemical Engineering, 2023, 57(5): 265-279. |
[11] | Yujia Cui, Zhiqiang Tan, Yanan Wang, Shuxian Shi, Xiaonong Chen. One-step crosslinking preparation of tannic acid particles for the adsorption and separation of cationic dyes [J]. Chinese Journal of Chemical Engineering, 2023, 57(5): 309-318. |
[12] | Shanshan Mao, Tao Shen, Qing Zhao, Tong Han, Fan Ding, Xin Jin, Manglai Gao. Selective capture of silver ions from aqueous solution by series of azole derivatives-functionalized silica nanosheets [J]. Chinese Journal of Chemical Engineering, 2023, 57(5): 319-328. |
[13] | Hany M. Abd El-Lateef, Mai M. Khalaf, K. Shalabi, Antar A. Abdelhamid. Multicomponent synthesis and designing of tetrasubstituted imidazole compounds catalyzed via ionic-liquid for acid steel corrosion protection: Experimental exploration and theoretical calculations [J]. Chinese Journal of Chemical Engineering, 2023, 55(3): 304-319. |
[14] | Zhongqi Ren, Jie Wang, Hewei Zhang, Fan Zhang, Shichao Tian, Zhiyong Zhou. Adsorption of rubidium ion from aqueous solution by surface ion imprinted materials [J]. Chinese Journal of Chemical Engineering, 2023, 54(2): 1-10. |
[15] | Mengge Shang, Jing Zhang, Jinqiang Sun, Shimo Yu, Feng Hua, Xiaoxu Xuan, Xun Sun, Serguei Filatov, Xibin Yi. Amine-functionalized mesoporous UiO-66 aerogel for CO2 adsorption [J]. Chinese Journal of Chemical Engineering, 2023, 54(2): 36-43. |
Viewed | ||||||||||||||||||||||||||||||||||||||||||||||||||
Full text 73
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Abstract 127
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||