SCI和EI收录∣中国化工学会会刊

Chin.J.Chem.Eng. ›› 2014, Vol. 22 ›› Issue (1): 11-18.DOI: 10.1016/S1004-9541(14)60012-4

Previous Articles     Next Articles

Surface Functionalization of Microporous Polypropylene Membrane with Polyols for Removal of Boron Acid from Aqueous Solution

ZHOU Rong1, DI Ling2, WANG Cang2, FANG Yan1, WU Jian2, XU Zhikang1   

  1. 1 MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China;
    2 Department of Chemistry, Zhejiang University, Hangzhou 310027, China
  • Received:2012-11-21 Revised:2013-06-16 Online:2014-01-04 Published:2014-01-05
  • Contact: XU Zhikang
  • Supported by:

    Supported by the National Natural Science Foundation of China (50933006), and the National Basic Research Program of China (2009CB623401).

Surface Functionalization of Microporous Polypropylene Membrane with Polyols for Removal of Boron Acid from Aqueous Solution

周蓉1, 狄玲2, 王苍2, 方艳1, 吴健2, 徐志康1   

  1. 1 MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, China;
    2 Department of Chemistry, Zhejiang University, Hangzhou 310027, China
  • 通讯作者: XU Zhikang
  • 基金资助:

    Supported by the National Natural Science Foundation of China (50933006), and the National Basic Research Program of China (2009CB623401).

Abstract: Affinity membranes are fabricated for boric acid removal by the surface functionalization of microporous polypropylene membrane (MPPM) with lactose-based polyols. The affinity is based on specific complexation between boric acid and saccharide polyols. A photoinduced grafting-chemical reaction sequence was used to prepare these affinity membranes. Poly(2-aminoethyl methacrylate hydrochloride) [poly(AEMA)] was grafted on the surfaces of MPPM by UV-induced graft polymerization. Grafting in the membrane pores was visualized by dying the cross-section of poly(AEMA)-grafted MPPM with fluorescein disodium and imaging with confocal laser scanning microscopy. It is concluded that lactose ligands can be covalently immobilized on the external surface and in the pores by the subsequent coupling of poly(AEMA) with lactobionic acid (LA). Physical and chemical properties of the affinity membranes were characterized by field emission scanning electron microscopy and Fourier Transform Infrared/Attenuated Total Refraction spectroscopy (FT-IR/ATR). 3-Aminophenyl boric acid (3-APBA) was removed from aqueous solution by a single piece of lactose-functionalized MPPM in a dynamic filtration system. The results show that the 3-APBA removal reaches an optimal efficiency (39.5%) under the alkaline condition (pH 9.1), which can be improved by increasing the immobilization density of LA. Regeneration of these affinity membranes can be easily realized through acid-base washing because the complexation of boric acid and saccharide polyol is reversible.

Key words: surface functionalization, affinity membrane, microporous polypropylene membrane, boron removal, polyols

摘要: Affinity membranes are fabricated for boric acid removal by the surface functionalization of microporous polypropylene membrane (MPPM) with lactose-based polyols. The affinity is based on specific complexation between boric acid and saccharide polyols. A photoinduced grafting-chemical reaction sequence was used to prepare these affinity membranes. Poly(2-aminoethyl methacrylate hydrochloride) [poly(AEMA)] was grafted on the surfaces of MPPM by UV-induced graft polymerization. Grafting in the membrane pores was visualized by dying the cross-section of poly(AEMA)-grafted MPPM with fluorescein disodium and imaging with confocal laser scanning microscopy. It is concluded that lactose ligands can be covalently immobilized on the external surface and in the pores by the subsequent coupling of poly(AEMA) with lactobionic acid (LA). Physical and chemical properties of the affinity membranes were characterized by field emission scanning electron microscopy and Fourier Transform Infrared/Attenuated Total Refraction spectroscopy (FT-IR/ATR). 3-Aminophenyl boric acid (3-APBA) was removed from aqueous solution by a single piece of lactose-functionalized MPPM in a dynamic filtration system. The results show that the 3-APBA removal reaches an optimal efficiency (39.5%) under the alkaline condition (pH 9.1), which can be improved by increasing the immobilization density of LA. Regeneration of these affinity membranes can be easily realized through acid-base washing because the complexation of boric acid and saccharide polyol is reversible.

关键词: surface functionalization, affinity membrane, microporous polypropylene membrane, boron removal, polyols