Chin.J.Chem.Eng. ›› 2014, Vol. 22 ›› Issue (5): 489-495.DOI: 10.1016/S1004-9541(14)60060-4
LI Guoneng, ZHENG Youqu, HU Guilin, ZHANG Zhiguo
Received:
2012-12-26
Revised:
2013-06-21
Online:
2014-05-06
Published:
2014-05-28
Supported by:
Supported by the National Natural Science Foundation of China (51106140) and the Natural Science Foundation of Zhejiang Province (Z1110695).
李国能, 郑友取, 胡桂林, 张治国
通讯作者:
LI Guoneng,E-mail: 109026@zust.edu.cn
基金资助:
Supported by the National Natural Science Foundation of China (51106140) and the Natural Science Foundation of Zhejiang Province (Z1110695).
LI Guoneng, ZHENG Youqu, HU Guilin, ZHANG Zhiguo. Convective Heat Transfer Enhancement of a Rectangular Flat Plate by an Impinging Jet in Cross Flow[J]. Chin.J.Chem.Eng., 2014, 22(5): 489-495.
李国能, 郑友取, 胡桂林, 张治国. Convective Heat Transfer Enhancement of a Rectangular Flat Plate by an Impinging Jet in Cross Flow[J]. Chinese Journal of Chemical Engineering, 2014, 22(5): 489-495.
1 Downs, S.J., James, E.H., "Jet impingement heat transfer: A literature survey", In: National Heat Transfer Conference, Pennsylvania, Paper 87-HT-35 (1987). 2 Zuckerman, N., Lior, N., "Jet impingement heat transfer: Physics, correlations, and numerical modeling", Adv. Heat Transfer, 39 (1), 565-631 (2006). 3 Akansu, Y.E., Sarioglu, M., Kuvvet, K., Yavuz, T., "Flow field and heat transfer characteristics in an oblique slot jet impinging on a flat plate", Int. Comm. Heat Mass Transfer, 35 (7), 873-880 (2008). 4 Choo, K., Kang, T.Y., Kim, S.J., "The effect of inclination on impinging jets at small nozzle-to-plate spacing", Int. J. Heat Mass Transfer, 55 (13-14), 3327-3334 (2012). 5 Gulati, P., Katti, V., Prabhu, S.V., "Influence of the shape of the nozzle on local heat transfer distribution between smooth flat surface and impinging air jet", Int. J. Therm. Sci., 48 (3), 602-617 (2009). 6 Koseoglu, M.F., Baskaya, S., "The role of jet inlet geometry in impinging jet heat transfer, modeling and experiments", Int. J. Therm. Sci., 49 (8), 1417-1426 (2010). 7 Kristiawan, M., Meslem, A., Nastase, I., Sobolik V., "Wall shear rates and mass transfer in impinging jets: Comparison of circular convergent and cross-shaped orifice nozzles", Int. J. Heat Mass Transfer, 55 (1-3), 282-293 (2012). 8 Buchlin, J.M., "Convective heat transfer in impinging-gas-jet arrangements", J. Appl. Fluid Mec., 4, 137-149 (2011). 9 Xu, P., Yu, B.M., Qiu, S.X., Poh, H.J., Mujumdar, A.S., "Turbulent impinging jet heat transfer enhancement due to intermittent pulsation", Int. J. Therm. Sci., 49 (7), 1247-1252 (2010). 10 Qayoum, A., Gupta, V., Panigrahi, P.K., Muralidhar, K., "Perturbation of a laminar boundary by a synthetic jet for heat transfer enhancement", Int. J. Heat Mass Transfer, 53 (23-24), 5035-5057 (2010). 11 Roux, S., Fénot, M., Lalizel, G., Brizzi, L.E., Dorignac, E., "Experimental investigation of the flow and heat transfer of an impinging jet under acoustic excitation", Int. J. Heat Mass Transfer, 54 (15-16), 3277-3290 (2011). 12 Klein, D., Hetsroni, G., "Enhancement of heat transfer coefficients by actuation against an impinging jet", Int. J. Heat Mass Transfer, 55 (15-16), 4183-4194 (2012). 13 Nuntadusit, C., Wae-hayee, M., Bunyajitradulya, A., Eiamsa-ard, S., "Visualization of flow and heat transfer characteristics for swirling impinging jet", Int. Comm. Heat Mass Transfer, 39 (5), 640-648 (2012). 14 Nanan, K., Wongcharee, K., Nuntadusit, C., Eiamsa-ard, S., "Forced convective heat transfer by swirling impinging jets issuing from nozzles equipped with twisted tapes", Int. Comm. Heat Mass Transfer, 39 (6), 844-852 (2012). 15 Nuntadusit, C., Wae-hayee, M., Bunyajitradulya, A., Eiamsa-ard, S., "Heat transfer enhancement by multiple swirling impinging jets with twisted-tape swirl generators", Int. Comm. Heat Mass Transfer, 39 (1), 102-107 (2012). 16 Pakhomov, M.A., Terekhov, V.I., "Enhancement of an impingement heat transfer between turbulent mist jet and plat surface", Int. J. Heat Mass Transfer, 53 (15-16), 3156-3165 (2010). 17 Choo, K.S., Kim, S.J., "Heat transfer and fluid flow characteristics of two-phase impinging jets", Int. J. Heat Mass Transfer, 53 (25-26), 5692-5699 (2010). 18 Choo, K.S., Kim, S.J., "Comparison of thermal characteristics of confined and unconfined impinging jets", Int. J. Heat Mass Transfer, 53 (15-16), 3366-3371 (2010). 19 Pakhomov, M.A., Terekhov, V.I., "The effect of confinement on the flow and turbulent heat transfer in a mist impinging jet", Int. J. Heat Mass Transfer, 54 (19-20), 4266-4274 (2011). 20 Duda, J.C., Lagor, F.D., Fleischer, A.S., "A flow visualization study of the development of vortex structures in a round jet impinging on a flat plate and a cylindrical pedestal", Exp. Therm. Fluid Sci., 32 (8), 1754-1758 (2008). 21 Choo, K.S., Youn, Y.J., Kim, S.J., Lee, D.H., "Heat transfer characteristics of a micro-scale impinging slot jet", Int. J. Heat Mass Transfer, 52 (13-14), 3169-3175 (2009). 22 Lee, D.H., Park, H.J., Ligrani, P., "Milliscale confined impinging slot jets: Laminar heat transfer characteristics for an isothermal flat plate", Int. J. Heat Mass Transfer, 55 (9-10), 2249-2260 (2012). 23 Koseoglu, M.F., Baskaya, S., "The effect of flow field and turbulence on heat transfer characteristics of confined circular and elliptic impinging jets", Int. J. Therm. Sci., 47 (10), 1332-1346 (2008). 24 Karwa, N., Schmidt, L., Stephan, P., "Hydrodynamics of quenching with impinging free-surface jet", Int. J. Heat Mass Transfer, 55 (13-14), 3677-3685 (2012). 25 Jaramillo, J.E., Trias, F.X., Gorobets, A., Pérez-Segarra, C.D., Oliva, A., "DNS and RANS modeling of a turbulent plane impinging jet", Int. J. Heat Mass Transfer, 55 (4), 789-801 (2012). 26 Ndao, S., Lee, H.J., Peles, Y., Jensen, M.K., "Heat transfer enhancement from micro pin fins subjected to an impinging jet", Int. J. Heat Mass Transfer, 55 (1-3), 413-421 (2012). 27 Al-aual, O.M.A., "Heat transfer distributions on the walls of a narrow channel with jet impingement and cross flow", Ph.D. Thesis, University of Pittsburgh, USA (2003). 28 Rhee, D.H., Yoon, P.H., Cho, H.H., "Local heat/mass transfer and flow characteristics of array impinging jets with effusion holes ejecting spent air", Int. J. Heat Mass Transfer, 46 (6), 1049-1061 (2003). 29 Thibault, D., Fénot, M., Lalizel, G., Dorignac, E., "Experimental study of heat transfer from impinging jet with upstream and downstream crossflow", In: Proceedings of International Symposium on Heat Transfer in Gas Turbine Systems, Turkey (2009). 30 Leschziner, M.A., Ince, N.Z., "Computational modeling of three-dimensional impinging jets with and without cross-flow using second-moment closure", Comput. Flu., 24 (7), 811-832 (1995). 31 Qi, M.L., Chen, Z.C., Fu, R.S., "Flow structure of the plane turbulent impinging jet in cross flow", J. Hydr. Res., 39 (2), 155-161 (2001). 32 Barata, J.M.M., Durâo, D.F.G., "Laser-Doppler measurements of impinging jet flows through a crossflow", Exp. Fluids, 36 (5), 665-674 (2004). 33 Rundström, D., Moshfegh, B., "Large-eddy simulation of an impinging jet in a cross-flow on a heated wall-mounted cube", Int. J. Heat Mass Transfer, 52 (3-4), 921-931 (2009). 34 Jones, R.E., Kelso, R.M., Dally, B.B., "Effect of flow parameters on an obliquely impinging jet in a cross flow", In: Proceedings of 17th Australasian Fluid Mechanics Conference, New Zealand (2010). 35 Kabari, L., "Flow and heat transfers associated with impinging jets in crossflows", Ph.D. Thesis, Cranfield Institute of Technology, UK (1977). 36 Heo, M.W., Lee, K.D., Kim, K.Y., "Optimization of an inclined elliptic impinging jet with cross flow for enhancing heat transfer", Heat Mass Transfer, 47 (6), 731-742 (2011). 37 Zhou, H., Tang, Q., Ren, T., Li, G.N., Cen, K.F., "Control of thermoacoustic instabilities by CO2 and N2 jet in cross-flow". Appl. Therm. Eng., 36 (4), 353-359 (2012). 38 Jones, A.M., Smith, I.E., Probert, S.D., "External thermography of buildings and structures as a means of determining their heat losses", In: Proceedings of a Symposium on Industrial and Civil Applications of Infrared Technology, Society of Photo-Optical Instrumentation Engineers, Michigan (1977). 39 Sau, A., Sheu, T.W.H., Hwang, R.R., Yang, W.C., "Three-dimensional simulation of square jets in cross-flow", Phys. Rev. E, 69 (6), 066302: 1-20 (2004). 40 Muppidi S., Mahesh, K., "Study of trajectories of jets in crossflow using direct numerical simulation", J. Fluid Mech., 530 (1), 81-100 (2005). 41 Li, C.Y., Garimella, S.V., "Prandtl-number effects and generalized correlations for confined and submerged jet impingement", Int. J. Heat Mass Transfer, 44 (18), 3471-3480 (2001). 42 Tawfek, A.A., "Heat transfer and pressure distributions of an impinging jet on a flat surface", Heat Mass Transfer, 32 (1-2), 49-54 (1996). 43 Yu, M.Z., Lin, J.Z., Xiong, H.B., "Quadrature method of moments for nanoparticle coagulation and diffusion in the planar impinging jet flow", Chin. J. Chem. Eng., 15 (6), 828-836 (2007). 44 Margaso, R.J., "Fifty years of jet in cross-flow research", In: Proceedings of Computational and Experimental Assessment of Jets in Cross-flow, Winchester, UK (1992). |
[1] | Feng Jiang, Di Xu, Ruijia Li, Guopeng Qi, Xiulun Li. Particle collision behavior and heat transfer performance in a Na2SO4 circulating fluidized bed evaporator [J]. Chinese Journal of Chemical Engineering, 2022, 46(6): 40-52. |
[2] | Chuanshuai Dong, Lin Lu, Tao Wen, Shaojie Zhang. Thermal performance assessment of self-rotating twisted tapes and Al2O3 nanoparticle in a circular pipe [J]. Chinese Journal of Chemical Engineering, 2021, 32(4): 77-86. |
[3] | Krunal M. Gangawane, Hakan F. Oztop. Mixed convection in the heated semi-circular lid-driven cavity for nonNewtonian power-law fluids: Effect of presence and shape of the block [J]. Chinese Journal of Chemical Engineering, 2020, 28(5): 1225-1240. |
[4] | P. Soleimani, M. Khoshvaght-Aliabadi, H. Rashidi, H. Bahmanpour. Performance enhancement of water bath heater at natural gas city gate station using twisted tubes [J]. Chinese Journal of Chemical Engineering, 2020, 28(1): 165-179. |
[5] | Narendra Thakur, Agnimitra Biswas, Yogesh Kumar, Mithinga Basumatary. CFD analysis of performance improvement of the Savonius water turbine by using an impinging jet duct design [J]. Chinese Journal of Chemical Engineering, 2019, 27(4): 794-801. |
[6] | Yongliang Wan, Runhan Wu, Cong Qi, Gang Duan, Ruizhao Yang. Experimental study on thermo-hydraulic performances of nanofluids flowing through a corrugated tube filled with copper foam in heat exchange systems [J]. Chin.J.Chem.Eng., 2018, 26(12): 2431-2440. |
[7] | Pedram Karimi Pour-Fard, Ebrahim Afshari, Masoud Ziaei-Rad, Shahed Taghian-Dehaghani. A numerical study on heat transfer enhancement and design of a heat exchanger with porous media in continuous hydrothermal flow synthesis system [J]. , 2017, 25(10): 1352-1359. |
[8] | Pedram Karimi Pour-Fard, Ebrahim Afshari, Masoud Ziaei-Rad, Shahed Taghian-Dehaghani. A numerical study on heat transfer enhancement and design of a heat exchanger with porous media in continuous hydrothermal flow synthesis system [J]. , 2017, 25(10): 1352-1359. |
[9] | M. Khoshvaght-Aliabadi, M. H. Akbari, F. Hormozi. An empirical study on vortex-generator insert fitted in tubular heat exchangers with dilute Cu-water nanofluid flow [J]. Chin.J.Chem.Eng., 2016, 24(6): 728-736. |
[10] | Jun Zhang, Youzhi Liu, Ying Luo. The turbulent behavior of novel free triple-impinging jets with large jet spacing by means of particle image velocimetry [J]. Chin.J.Chem.Eng., 2016, 24(6): 757-766. |
[11] | Zhengming Gao, Manting Zhao, Yun Yu, Zhipeng Li, Jing Han. Investigation of extraction fraction in confined impinging jet reactors for tri-butyl-phosphate extracting butyric acid process [J]. , 2016, 24(2): 310-316. |
[12] | Guoneng Li, Youqu Zheng, Huawen Yang, Wenwen Guo, Yousheng Xu. Lattice Boltzmann simulation of a laminar square jet in cross flows [J]. Chin.J.Chem.Eng., 2016, 24(11): 1505-1512. |
[13] | Hamid Moradi, Bahamin Bazooyar, Ahmad Moheb, Seyed Gholamreza Etemad. Optimization of natural convection heat transfer of Newtonian nanofluids in a cylindrical enclosure [J]. Chin.J.Chem.Eng., 2015, 23(8): 1266-1274. |
[14] | Zhengming Gao, Jing Han, Yuyun Bao, Zhipeng Li. Micromixing efficiency in a T-shaped confined impinging jet reactor [J]. , 2015, 23(2): 350-355. |
[15] | Smith Eiamsa-ard, Vichan Kongkaitpaiboon, Kwanchai Nanan. Thermohydraulics of Turbulent Flow Through Heat Exchanger Tubes Fitted with Circular-rings and Twisted Tapes [J]. Chin.J.Chem.Eng., 2013, 21(6): 585-593. |
Viewed | ||||||||||||||||||||||||||||||||||||||||||||||||||
Full text 107
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Abstract 4522
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||