Cost-effective bifunctional lignin-derived carbon supported tin oxide with efficient production of 5-hydroxymethylfurfural from glucose

doi:10.1016/j.cjche.2024.07.002

Chinese Journal of Chemical Engineering ›› 2024, Vol. 74 ›› Issue (10): 154-164.DOI: 10.1016/j.cjche.2024.07.002

Previous Articles Next Articles

Cost-effective bifunctional lignin-derived carbon supported tin oxide with efficient production of 5-hydroxymethylfurfural from glucose

Sien Yan¹, Linhuo Gan^1,4, Kui Wang^2,3,4, Kang Sun^2,3,4

1 College of Chemical Engineering, Huaqiao University, Xiamen 361021, China;
2 Key Laboratory of Biomass Energy and Materials of Jiangsu Province, Nanjing 210042, China;
3 Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry, Nanjing 210042, China;
4 Fujian Provincial Key Laboratory of Biomass Low-Carbon Conversion, Huaqiao University, Xiamen 361021, China

Received:2023-12-26 Revised:2024-06-12 Accepted:2024-07-09 Online:2024-08-06 Published:2024-10-28
Contact: Linhuo Gan,Tel.:+86 18959266106.E-mail:lhgan401@126.com
Supported by:
This work was supported by the independent research major project of Key Laboratory of Biomass Energy and Materials of Jiangsu Province, China (JSBEM-S-202202), the key project of Science and Technology Plan of Nanping, China (N2022B002), and the Open Research Fund of Academy of Advanced Carbon Conversion Technology, Huaqiao University, China.

Cost-effective bifunctional lignin-derived carbon supported tin oxide with efficient production of 5-hydroxymethylfurfural from glucose

Sien Yan¹, Linhuo Gan^1,4, Kui Wang^2,3,4, Kang Sun^2,3,4

1 College of Chemical Engineering, Huaqiao University, Xiamen 361021, China;
2 Key Laboratory of Biomass Energy and Materials of Jiangsu Province, Nanjing 210042, China;
3 Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry, Nanjing 210042, China;
4 Fujian Provincial Key Laboratory of Biomass Low-Carbon Conversion, Huaqiao University, Xiamen 361021, China

通讯作者: Linhuo Gan,Tel.:+86 18959266106.E-mail:lhgan401@126.com
基金资助:
This work was supported by the independent research major project of Key Laboratory of Biomass Energy and Materials of Jiangsu Province, China (JSBEM-S-202202), the key project of Science and Technology Plan of Nanping, China (N2022B002), and the Open Research Fund of Academy of Advanced Carbon Conversion Technology, Huaqiao University, China.

Abstract

Abstract: 5-Hydroxymethylfurfural (5-HMF) is one of the important bio-based platform compounds, and the catalytic conversion of glucose to 5-HMF is a highly desirable approach that is receiving increasing attention. Herein, we reported the synthesis of lignin-derived carbon supported tin oxides (SnO/LC) catalyst via a two-step hydrothermal-pyrolytic method using wheat straw alkali lignin as a cost-effective carbon source with high carbon content. The key preparation conditions of the catalyst and its catalytic conditions for the conversion of glucose to 5-HMF were investigated, respectively. Results show that under the preparation conditions of tin tetrachloride dosage of 3.0 mmol and pyrolysis temperature of 500 ℃, the optimized catalyst (3.0-SnO/LC-500) with a high yield of 63.4% exhibits good catalytic performance of 5-HMF yield of 50.1% and reaction selectivity of 86.0% under the optimum conditions of reaction temperature and time of 190 ℃ and 3 h, initial glucose concentration of 10 %(mass), 3.0-SnO/LC-500 dosage of 100 mg in a biphasic solvent system of volume ratio of water to tetrahydrofuran of 1:4. In addition, 3.0-SnO/LC-500 exerts an excellent reusability in a five-cycle experiment. Furthermore, SnO/LC was characterized in detail using X-ray diffraction patterns (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), ammonia temperature-programmed-desorption (NH₃-TPD), pyridine adsorption infrared spectroscopy (Py-FTIR), scanning electron microscope (SEM) and thermal gravimetric analysis (TGA). Results indicate that Brønsted acid sites and Lewis acid sites coexist on 3.0-SnO/LC-500, and more Sn⁴⁺, as well as a proper ratio of weak acidity to medium acidity, are conductive to its catalytic performance in glucose-to-5-HMF reaction.

Key words: Lignin, Biomass, Catalyst support, Selectivity, Biphasic solvent system

摘要： 5-Hydroxymethylfurfural (5-HMF) is one of the important bio-based platform compounds, and the catalytic conversion of glucose to 5-HMF is a highly desirable approach that is receiving increasing attention. Herein, we reported the synthesis of lignin-derived carbon supported tin oxides (SnO/LC) catalyst via a two-step hydrothermal-pyrolytic method using wheat straw alkali lignin as a cost-effective carbon source with high carbon content. The key preparation conditions of the catalyst and its catalytic conditions for the conversion of glucose to 5-HMF were investigated, respectively. Results show that under the preparation conditions of tin tetrachloride dosage of 3.0 mmol and pyrolysis temperature of 500 ℃, the optimized catalyst (3.0-SnO/LC-500) with a high yield of 63.4% exhibits good catalytic performance of 5-HMF yield of 50.1% and reaction selectivity of 86.0% under the optimum conditions of reaction temperature and time of 190 ℃ and 3 h, initial glucose concentration of 10 %(mass), 3.0-SnO/LC-500 dosage of 100 mg in a biphasic solvent system of volume ratio of water to tetrahydrofuran of 1:4. In addition, 3.0-SnO/LC-500 exerts an excellent reusability in a five-cycle experiment. Furthermore, SnO/LC was characterized in detail using X-ray diffraction patterns (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), ammonia temperature-programmed-desorption (NH₃-TPD), pyridine adsorption infrared spectroscopy (Py-FTIR), scanning electron microscope (SEM) and thermal gravimetric analysis (TGA). Results indicate that Brønsted acid sites and Lewis acid sites coexist on 3.0-SnO/LC-500, and more Sn⁴⁺, as well as a proper ratio of weak acidity to medium acidity, are conductive to its catalytic performance in glucose-to-5-HMF reaction.

关键词: Lignin, Biomass, Catalyst support, Selectivity, Biphasic solvent system

Sien Yan, Linhuo Gan, Kui Wang, Kang Sun. Cost-effective bifunctional lignin-derived carbon supported tin oxide with efficient production of 5-hydroxymethylfurfural from glucose[J]. Chinese Journal of Chemical Engineering, 2024, 74(10): 154-164.

References

[1] L.Y. Meng, M.G. Ma, X.X. Ji, Preparation of lignin-based carbon materials and its application as a sorbent, Materials 12 (7) (2019) 1111.
[2] L.H. Gan, L. Lyu, T.R. Shen, S. Wang, Sulfonated lignin-derived ordered mesoporous carbon with highly selective and recyclable catalysis for the conversion of fructose into 5-hydroxymethylfurfural, Appl. Catal., A-Gen. 574 (2019) 132-143.
[3] S. Wang, L. Lyu, G.B. Sima, Y. Cui, B.X. Li, X.Q. Zhang, L.H. Gan, Optimization of fructose dehydration to 5-hydroxymethylfurfural catalyzed by SO₃H-bearing lignin-derived ordered mesoporous carbon, Korean J. Chem. Eng. 36 (7) (2019) 1042-1050.
[4] M. Li, Q. Zhang, B. Luo, C. Chen, S. Wang, D. Min, Lignin-based carbon solid acid catalyst prepared for selectively converting fructose to 5-hydroxymethylfurfural, Ind. Crop. Prod. 145 (2019) 111920.
[5] R. Ding, H.C. Wu, M. Thunga, N. Bowler, M.R. Kessler, Processing and characterization of low-cost electrospun carbon fibers from organosolv lignin/polyacrylonitrile blends, Carbon 100 (2016) 126-136.
[6] F.J. Garcia-Mateos, T. Cordero-Lanzac, R. Berenguer, E. Morallon, D. Cazorla-Amoros, J. Rodriguez-Mirasol, T. Cordero, Lignin-derived Pt supported carbon (submicron)fiber electrocatalysts for alcohol electro-oxidation, Appl. Catal., B-Environ. 211 (2017) 18-30.
[7] T.D. Swift, H. Nguyen, Z. Erdman, J.S. Kruger, V. Nikolakis, D.G. Vlachos, Tandem Lewis acid/Broensted acid-catalyzed conversion of carbohydrates to 5-hydroxymethylfurfural using zeolite beta, J. Catal. 333 (2016) 149-161.
[8] A.J. Ragauskas, C.K. Williams, B.H. Davison, G. Britovsek, J. Cairney, C.A. Eckert, W.J. Frederick, J.P. Hallett, D.J. Leak, C.L. Liotta, J.R. Mielenz, R. Murphy, R. Templer, T. Tschaplinski, The path forward for biofuels and biomaterials, Science 311 (5760) (2006) 484-489.
[9] W. Guo, Z. Zhang, J. Hacking, H.J. Heeres, J. Yue, Selective fructose dehydration to 5-hydroxymethylfurfural from a fructose-glucose mixture over a sulfuric acid catalyst in a biphasic system: Experimental study and kinetic modelling, Chem. Eng. J. 409 (2020) 128182.
[10] W.Z. Guo, H.J. Heeres, J. Yue, Continuous synthesis of 5-hydroxymethylfurfural from glucose using a combination of AlCl₃ and HCl as catalyst in a biphasic slug flow capillary microreactor, Chem. Eng. J. 381 (2020) 122754.
[11] M.H. Li, W.Z. Li, Y.J. Lu, H. Jameel, H.M. Chang, L.L. Ma, High conversion of glucose to 5-hydroxymethylfurfural using hydrochloric acid as a catalyst and sodium chloride as a promoter in a water/γ-valerolactone system, RSC Adv. 7 (24) (2017) 14330-14336.
[12] Y.F. Nie, Q.D. Hou, W.Z. Li, C.Y.L. Bai, X.Y. Bai, M.T. Ju, Efficient synthesis of furfural from biomass using SnCl₄ as catalyst in ionic liquid, Molecules 24 (3) (2019) 594.
[13] Y. Yang, C.W. Hu, M.M. Abu-Omar, Conversion of carbohydrates and lignocellulosic biomass into 5-hydroxymethylfurfural using AlCl₃·6H₂O catalyst in a biphasic solvent system, Green Chem. 14 (2) (2012) 509-513.
[14] H.B. Phan, C.M. Luong, T.H. Nguyen, L.D. Nguyen, K.N. Tran, H.T.T. Nguyen, P.H. Tran, A facile and practical conversion of carbohydrates into HMF using metal chlorides in [DMSO][CholineCl] deep eutectic solvent, Biomass Bioenergy 174 (2023) 106855.
[15] Y. Nishimura, M. Suda, M. Kuroha, H. Kobayashi, K. Nakajima, A. Fukuoka, Synthesis of 5-hydroxymethylfurfural from highly concentrated aqueous fructose solutions using activated carbon, Carbohydr. Res. 486 (2019) 107826.
[16] A. Rusanen, R. Lahti, K. Lappalainen, J. Karkkainen, T. Hu, H. Romar, U. Lassi, Catalytic conversion of glucose to 5-hydroxymethylfurfural over biomass-based activated carbon catalyst, Catal. Today 357 (2020) 94-101.
[17] L. Li, J.H. Ding, J.G. Jiang, Z.G. Zhu, P. Wu, One-pot synthesis of 5-hydroxymethylfurfural from glucose using bifunctional [Sn,Al]-Beta catalysts, Chinese J. Catal. 36 (6) (2015) 820-828.
[18] O. Ojelabi, S. Yousatit, U. Rashid, C. Ngamcharussrivichai, Mild dealumination of H-ZSM-5 zeolite for enhanced conversion of glucose into 5-hydroxymethylfurfural in a biphasic solvent system, Catalysts 13 (6) (2023) 982.
[19] X.Y. Xing, X. Shi, M.Y. Ruan, Q.C. Wei, Y. Guan, H. Gao, S.Q. Xu, Sulfonic acid functionalized β zeolite as efficient bifunctional solid acid catalysts for the synthesis of 5-hydroxymethylfurfural from cellulose, Int. J. Biol. Macromol. 242 (2023) 125037.
[20] X.X. Yang, M.M. Sadughi, A. Bahadoran, M. Al-Haideri, P.G. Kargar, A.S. Noori, S.M. Sajjadinezhad, A new method for conversion of fructose and glucose to 5-hydroxyme- thylfurfural by magnetic mesoporous of SBA-16 was modified to sulfonic acid as Lewis's acid catalysts, Renew. Energ. 209 (2023) 145-156.
[21] T. Huang, Y.H. Zhou, X.H. Zhang, D.Y. Peng, X.L. Nie, J. Chen, W.M. Xiong, Conversion of carbohydrates into furfural and 5-hydroxymethylfurfural using furfuryl alcohol resin-based solid acid as catalyst, Cellulose 29 (3) (2022) 1419-1433.
[22] S. Pumrod, A. Kaewchada, S. Roddecha, A. Jaree, 5-HMF production from glucose using ion exchange resin and alumina as a dual catalyst in a biphasic system, RSC Adv. 10 (16) (2020) 9492-9498.
[23] Y. Zhang, J.G. Wang, J.H. Wang, Y. Wang, M. Wang, H.Y. Cui, F. Song, X.Y. Sun, Y.J. Xie, W.M. Yi, Al₂O₃-TiO₂ modified sulfonated carbon with hierarchically ordered pores for glucose conversion to 5-HMF, ChemistrySelect 4 (19) (2019) 5724-5731.
[24] A.A. Silahua-Pavon, C.G. Espinosa-Gonzalez, F. Ortiz-Chi, J.G. Pacheco-Sosa, H. Perez-Vidal, J.C. Arevalo-Perez, S. Godavarthi, J.G. Torres-Torres, Production of 5-HMF from glucose using TiO₂-ZrO₂ catalysts: Effect of the sol-gel synthesis additive, Catal. Commun. 129 (2019) 105723.
[25] R. Tomer, P. Biswas, Reaction kinetics study and the estimation of thermodynamic parameters for the conversion of glucose to 5-hydroxymethylfurfural (5-HMF) in a dimethyl sulfoxide (DMSO) medium in the presence of a mesoporous TiO₂ catalyst, J. Taiwan Inst. Chem. Eng. 136 (2022) 104427.
[26] A. Herbst, C. Janiak, Selective glucose conversion to 5-hydroxymethylfurfural (5-HMF) instead of levulinic acid with MIL-101Cr MOF-derivatives, New J. Chem. 40 (9) (2016) 7958-7967.
[27] C.X. Lu, Y.Z. Zhou, L.Z. Li, H.W. Chen, L.S. Yan, Conversion of glucose into 5-hydroxymethylfurfural catalyzed by Cr-and Fe-containing mixed-metal metal-organic frameworks, Fuel 333 (2023) 126415.
[28] J.J. Wang, J.W. Ren, X.H. Liu, J.X. Xi, Q.N. Xia, Y.H. Zu, G.Z. Lu, Y.Q. Wang, Direct conversion of carbohydrates to 5-hydroxymethylfurfural using Sn-Mont catalyst, Green Chem. 14 (9) (2012) 2506-2512.
[29] J.P. Lorenti, E. Scolari, E.M. Albuquerque, M.A. Fraga, J.M.R. Gallo, Tailoring Sn-SBA-15 properties for catalytic isomerization of glucose, Appl. Catal., A-Gen. 581 (2019) 37-42.
[30] J. Rohilla, S. Thakur, K. Kumar, R. Singh, V. Kaur, Nanopalladium-decorated Sn-Na MOF catalyst for upgrading biosugars to 5-hydroxymethylfurfural in an aqueous medium, ACS Appl. Nano Mater. 6 (13) (2023) 12063-12072.
[31] G. Qiu, B.H. Chen, C.P. Huang, N. Liu, X.L. Sun, Tin-modified ionic liquid polymer: A novel and efficient catalyst for synthesis of 5-hydroxymethylfurfural from glucose, Fuel 268 (2020) 117136.
[32] E. Nikolla, Y. Roman-Leshkov, M. Moliner, M.E. Davis, "One-pot" synthesis of 5-(hydroxymethyl)furfural from carbohydrates using tin-Beta zeolite, ACS Catal. 1 (4) (2011) 408-410.
[33] Q. Xu, Z. Zhu, Y.K. Tian, J. Deng, J. Shi, Y. Fu, Sn-MCM-41 as efficient catalyst for the conversion of glucose into 5-hydroxymethylfurfural in ionic liquids, BioRes. 9 (1) (2014) 303-315.
[34] G. Qiu, B.H. Chen, N. Liu, C.P. Huang, Hafnium-tin composite oxides as effective synergistic catalysts for the conversion of glucose into 5-hydroxymethylfurfural, Fuel 311 (2022) 122628.
[35] Q.D. Hou, M.N. Zhen, L. Liu, Y. Chen, F. Huang, S.Q. Zhang, W.Z. Li, M.T. Ju, Tin phosphate as a heterogeneous catalyst for efficient dehydration of glucose into 5-hydroxymethylfurfural in ionic liquid, Appl. Catal., B-Environ. 224 (2018) 183-193.
[36] K. Wang, A. Rezayan, L.Q. Si, Y.S. Zhang, R.F. Nie, T.L. Lu, J.S. Wang, C.B. Xu, Highly efficient 5-hydroxymethylfurfural production from glucose over bifunctional SnOx/C catalyst, ACS Sustain. Chem. Eng. 9 (34) (2021) 11351-11360.
[37] H.C. Ma, K. Teng, Y.H. Fu, Y. Song, Y.W. Wang, X.L. Dong, Synthesis of visible-light responsive Sn-SnO₂/C photocatalyst by simple carbothermal reduction, Energy Environ. Sci. 4 (8) (2011) 3067-3074.
[38] Y.J. Hong, Y.C. Kang, One-pot synthesis of core-shell-structured tin oxide-carbon composite powders by spray pyrolysis for use as anode materials in Li-ion batteries, Carbon 88 (2015) 262-269.
[39] Y. Kim, Y. Yoon, D. Shin, Fabrication of Sn/SnO₂ composite powder for anode of lithium ion battery by aerosol flame deposition, J. Anal. Appl. Pyrolysis 85 (1-2) (2009) 557-560.
[40] M.Z. Iqbal, F.P. Wang, T. Feng, H.L. Zhao, M.Y. Rafique, R.U. Din, M.H. Farooq, Q.U. Javed, D.F. Khan, Facile synthesis of self-assembled SnO nano-square sheets and hydrogen absorption characteristics, Mater. Res. Bull. 47 (11) (2012) 3902-3907.
[41] X. Zhao, L. Huang, S. Namuangruk, H. Hu, X.N. Hu, L.Y. Shi, D.S. Zhang, Morphology-dependent performance of Zr-CeVO₄/TiO₂ for selective catalytic reduction of NO with NH₃, Catal. Sci. Technol. 6 (14) (2016) 5543-5553.
[42] C. Zhang, C.H. Jia, Y. Cao, Y. Yao, S.Q. Xie, S.C. Zhang, H.F. Lin, Water-assisted selective hydrodeoxygenation of phenol to benzene over the Ru composite catalyst in the biphasic process, Green Chem. 21 (7) (2019) 1668-1679.
[43] M. Thommes, C. Schlumberger, Characterization of nanoporous materials, Annu. Rev. Chem. Biomol. Eng. 12 (2021) 137-162.
[44] L. Li, T.I. Koranyi, B.F. Sels, P.P. Pescarmona, Highly-efficient conversion of glycerol to solketal over heterogeneous Lewis acid catalysts, Green Chem. 14 (6) (2012) 1611-1619.
[45] F.F. Wang, J. Liu, H. Li, C.L. Liu, R.Z. Yang, W.S. Dong, Conversion of cellulose to lactic acid catalyzed by erbium-exchanged montmorillonite K10, Green Chem. 17 (4) (2015) 2455-2463.
[46] Y.C. Zhang, X. Yan, B.Q. Niu, J.Q. Zhao, A study on the conversion of glycerol to pyridine bases over Cu/HZSM-5 catalysts, Green Chem. 18 (10) (2016) 3139-3151.
[47] L. Atanda, A. Shrotri, S. Mukundan, Q. Ma, M. Konarova, J. Beltramini, Direct production of 5-hydroxymethylfurfural via catalytic conversion of simple and complex sugars over phosphated TiO₂, ChemSusChem 8 (17) (2015) 2907-2916.
[48] L. Li, F. Shen, R.L. Smith, X. Qi, Quantitative chemocatalytic production of lactic acid from glucose under anaerobic conditions at room temperature, Green Chem. 19 (1) (2016) 76-81.
[49] M. Li, X.J. Yu, C.S. Zhou, A.A. Yagoub, Q.H. Ji, L. Chen, Construction of an integrated platform for 5-HMF production and separation based on ionic liquid aqueous two-phase system, J. Mol. Liq. 313 (2020) 113529.
[50] X.C. Li, K.H. Peng, Q.N. Xia, X.H. Liu, Y.Q. Wang, Efficient conversion of cellulose into 5-hydroxymethylfurfural over niobia/carbon composites, Chem. Eng. J. 332 (2018) 528-536.
[51] S.Q. Xu, X.Y. Xing, H. Wu, X. Shi, Z.Q. Zhang, H. Gao, The Hydrothermally Stable NbW-SBA-15 as Highly Efficient Catalysts for the Conversion of Glucose into 5-Hydroxymethylfurfural, Catal. Lett. 152 (11) (2022) 3427-3436.

Cost-effective bifunctional lignin-derived carbon supported tin oxide with efficient production of 5-hydroxymethylfurfural from glucose

Cost-effective bifunctional lignin-derived carbon supported tin oxide with efficient production of 5-hydroxymethylfurfural from glucose

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Di Wu, Ping Hu, Hui Li, Zhidan Xue, Hang Lv, Yimeng Guo, Changwei Hu, Liangfang Zhu. Influences of fractional separation on the structure and reactivity of wheat straw cellulose for producing 5-hydroxymethylfurfural [J]. Chinese Journal of Chemical Engineering, 2024, 73(9): 154-162.
[2]	Qiyao Zhang, Shuangshuang Zhang, Xu Hu, Yongmin Huang. Effect of samarium doping on the activity and sulfur resistance of Ce/MnFeO_x catalyst for low-temperature selective catalytic reduction of NO_x by ammonia [J]. Chinese Journal of Chemical Engineering, 2024, 71(7): 272-282.
[3]	Zhaoli Wang, Wenjing Li, Yi Zhang, Yanyin Cheng, Junjian Yu, Tianming Dong, Xiaoyu Chi, Di Liu, Zhe Wang. Amine-functionalized metal organic framework@graphene oxide as filler in PAEK-containing carboxyl group membrane for ultrafiltration with ultra-high permeability and strong fouling resistance [J]. Chinese Journal of Chemical Engineering, 2024, 70(6): 93-103.
[4]	Pengxing Yuan, Xiude Hu, Jingjing Ma, Tuo Guo, Qingjie Guo. Thermogravimetric characteristics of corn straw and bituminous coal copyrolysis based the ilmenite oxygen carriers [J]. Chinese Journal of Chemical Engineering, 2024, 68(4): 8-15.
[5]	Peng Jiang, Hao Zhang, Guanhan Zhao, Lin Li, Tuo Ji, Liwen Mu, Xiaohua Lu, Jiahua Zhu. A thermodynamic view on the in-situ carbon dioxide reduction by biomass-derived hydrogen during calcium carbonate decomposition [J]. Chinese Journal of Chemical Engineering, 2024, 68(4): 231-240.
[6]	Chenhao Wei, Di Gao, Guohao Zhang, Liang Zhao, Jinsen Gao, Chunming Xu. Effect of mesopore spatial distribution of HZSM-5 catalyst on zinc state and product distribution in 1-hexene aromatization [J]. Chinese Journal of Chemical Engineering, 2024, 67(3): 16-26.
[7]	Yifang Mi, Wenqiang Wang, Sen Zhang, Yalong Guo, Yufeng Zhao, Guojin Sun, Zhihai Cao. Ultra-high specific surface area activated carbon from Taihu cyanobacteria via KOH activation for enhanced methylene blue adsorption [J]. Chinese Journal of Chemical Engineering, 2024, 67(3): 106-116.
[8]	Yong-Yi Zeng, Xin-Yi Xu, Jin-Xuan Xie, Wen-Li Chen, Lan Liu, Xin-Jian Yin, Bi-Shuang Chen. Lipase and photodecarboxylase coexpression: A potential strategy for alkane-based biodiesel production from natural triglycerides [J]. Chinese Journal of Chemical Engineering, 2024, 67(3): 238-246.
[9]	Siang Chen, Wenling Wu, Zhaoyang Niu, Deqi Kong, Wenbin Li, Zhongli Tang, Donghui Zhang. High adsorption selectivity of activated carbon and carbon molecular sieve boosting CO₂/N₂ and CH₄/N₂ separation [J]. Chinese Journal of Chemical Engineering, 2024, 67(3): 282-297.
[10]	Rui Yu, Zhensheng Shen, Yanan Liu, Chengxiang Shi, Juncong Qu, Lun Pan, Zhenfeng Huang, Xiangwen Zhang, Ji-Jun Zou. Tandem hydroalkylation and deoxygenation of lignin-derived phenolics to synthesize high-density fuels [J]. Chinese Journal of Chemical Engineering, 2024, 66(2): 104-109.
[11]	Hongbing Fu, Yufei Gu, Tianhua Gao, Fuwei Li, Hengshuo Gu, Hucheng Ge, Yuke Liu, Zhixia Li, Hongfei Lin, Jiangfei Cao. Green synthesis of ZSM-5 using silica fume and catalytic co-cracking of lignin and plastics for production of monocyclic aromatics [J]. Chinese Journal of Chemical Engineering, 2024, 65(1): 92-105.
[12]	Xin Wan, Hui Jiang, Zhen Ye, Hang Zhou, Yimin Ma, Xuanrui Miao, Xun He, Kequan Chen. Viscosity reduction of tapioca starch by incorporating with molasses hydrocolloids [J]. Chinese Journal of Chemical Engineering, 2023, 61(9): 165-172.
[13]	Yifan Jiang, Bingqi Xie, Jisong Zhang. Highly reactive and reusable heterogeneous activated carbons-based palladium catalysts for Suzuki-Miyaura reaction [J]. Chinese Journal of Chemical Engineering, 2023, 60(8): 165-172.
[14]	Jian Han, Xinhua Liu, Shanwei Hu, Nan Zhang, Jingjing Wang, Bin Liang. Optimization of decoupling combustion characteristics of coal briquettes and biomass pellets in household stoves [J]. Chinese Journal of Chemical Engineering, 2023, 59(7): 182-192.
[15]	Qunfeng Zhang, Bingcheng Li, Yuan Zhou, Deshuo Zhang, Chunshan Lu, Feng Feng, Jinghui Lv, Qingtao Wang, Xiaonian Li. Regulation of the selective hydrogenation performance of sulfur-doped carbon-supported palladium on chloronitrobenzene [J]. Chinese Journal of Chemical Engineering, 2023, 58(6): 69-75.