SCI和EI收录∣中国化工学会会刊

›› 2012, Vol. 20 ›› Issue (3): 439-443.

• Festschrift in Honor of Professor Gordon McKay on occasion of his retirement • Previous Articles     Next Articles

Electrochemical Treatment of Distillery Spent Wash Using Aluminum and Iron Electrodes

V. Khandegar, Anil. K. Saroha   

  1. Department of Chemical Engineering, Indian Institute of Technology, Delhi Hauz Khas, New Delhi-110016, India
  • Received:2012-02-20 Revised:2012-03-23 Online:2012-08-17 Published:2012-06-28

Electrochemical Treatment of Distillery Spent Wash Using Aluminum and Iron Electrodes

V. Khandegar, Anil. K. Saroha   

  1. Department of Chemical Engineering, Indian Institute of Technology, Delhi Hauz Khas, New Delhi-110016, India
  • 通讯作者: Anil. K. Saroha, E-mail: aksaroha@chemical.iitd.ac.in

Abstract: Electrochemical treatment of distillery spent wash was carried out using different combinations of aluminum and iron electrodes in batch mode of operation.The spent wash was characterized for various parameters as per standard method of analysis and the treatment results were analyzed in terms of chemical oxygen demand(COD) removal efficiency of the spent wash.The experiments were performed to study the effect of operating parameters such as current density,pH of the spent wash,agitation speed,electrolysis time and the distance between the electrodes on the COD removal efficiency of the spent wash.It was observed that aluminum electrodes were more suitable for treatment of distillery spent wash as compared to iron electrodes.The maximum COD removal efficiency of 81.3% was obtained with Al-Al electrodes at the current density of 0.187 A·cm-2 and pH 3 for an electrolysis time of 2 h.

Key words: electrocoagulation, distillery spent wash,current density,aluminum,iron

摘要: Electrochemical treatment of distillery spent wash was carried out using different combinations of aluminum and iron electrodes in batch mode of operation.The spent wash was characterized for various parameters as per standard method of analysis and the treatment results were analyzed in terms of chemical oxygen demand(COD) removal efficiency of the spent wash.The experiments were performed to study the effect of operating parameters such as current density,pH of the spent wash,agitation speed,electrolysis time and the distance between the electrodes on the COD removal efficiency of the spent wash.It was observed that aluminum electrodes were more suitable for treatment of distillery spent wash as compared to iron electrodes.The maximum COD removal efficiency of 81.3% was obtained with Al-Al electrodes at the current density of 0.187 A·cm-2 and pH 3 for an electrolysis time of 2 h.

关键词: electrocoagulation, distillery spent wash,current density,aluminum,iron