[1] S. Jašo, H.R. Godini, H. Arellano-Garcia, M. Omidkhah, G. Wozny, Analysis of attainable reactor performance for the oxidative methane coupling process, Chem. Eng. Sci. 65(24) (2010) 6341–6352. [2] T.P. Tiemersma, M.J. Tuinier, F. Gallucci, J.A.M. Kuipers, M.V.S. Annaland, A kinetics study for the oxidative coupling of methane on a Mn/Na2WO4/SiO2 catalyst, Appl. Catal. A: Gen. 433–434(2012) 96–108. [3] Y.P. Lu, A.G. Dixon, W.R. Moser, Y.H. Ma, U. Balachandran, Oxygen-permeable dense membrane reactor for the oxidative coupling of methane, J. Membr. Sci. 170(2000) 27–34. [4] Y.S. Lin, Y. Zeng, Catalytic properties of oxygen semipermeable perovskite-type ceramic membrane materials for oxidative coupling of methane, J. Catal. 164(1) (1996) 220–231. [5] X. Tan, K. Li, Applications of dense ceramic membrane reactors in selected oxidation and dehydrogenation processes for chemical production, in: Handbook of Membrane Reactors, Elsevier, Amsterdam (2013) 347–383. [6] Y.T. Liu, X.Y. Tan, K. Li, Mixed conducting ceramics for catalytic membrane processing, Catal. Rev. 48(2) (2006) 145–198. [7] S. Haag, A.C. van Veen, C. de Mirodatos, Influence of oxygen supply rates on performances of catalytic membrane reactors: Application to the oxidative coupling of methane, Catal. Today 127(1–4) (2007) 157–164. [8] T. Hibino, T. Sato, K.I. Ushiki, Y. Kuwahara, Membrane reactor for oxidative coupling of CH4 with an oxide ion–electron hole mixed conductor, J. Chem. Soc., Faraday Trans. 91(24) (1995) 4419–4422. [9] F.T. Akin, Y.S. Lin, Oxidative coupling of methane in dense ceramic membrane reactor with high yields, AIChE J. 48(10) (2002) 2298–2306. [10] W. Wang, Y.S. Lin, Analysis of oxidative coupling of methane in dense oxide membrane reactors, J. Membr. Sci. 103(3) (1995) 219–233. [11] L. Olivier, S. Haag, C. de Mirodatos, A.C. van Veen, Oxidative coupling of methane using catalyst modified dense perovskite membrane reactors, Catal. Today 142(1–2) (2009) 34–41. [12] Y. Zeng, Y.S. Lin, S.L. Swartz, Perovskite-type ceramic membrane: Synthesis, oxygen permeation and membrane reactor performance for oxidative coupling of methane, J. Membr. Sci. 150(1) (1998) 87–98. [13] X.Y. Tan, Y.T. Liu, K. Li, Preparation of LSCF ceramic hollow-fiber membranes for oxygen production by a phase-inversion/sintering technique, Ind. Eng. Chem. Res. 44(1) (2005) 61–66. [14] X.Y. Tan, Y.T. Liu, K. Li, Mixed conducting ceramic hollow-fiber membranes for air separation, AIChE J. 51(7) (2005) 1991–2000. [15] K. Li, X.Y. Tan, Y.T. Liu, Single-step fabrication of ceramic hollow fibers for oxygen permeation, J. Membr. Sci. 272(1–2) (2006) 1–5. [16] H. Liu, X.Y. Tan, Z.B. Pang, J.C. Diniz da Costa, G.Q. Lu, S.M. Liu, Novel dual structured mixed conducting ceramic hollow fibre membranes, Sep. Purif. Technol. 63(1) (2008) 243–247. [17] X.Y. Tan, Z.G. Wang, B. Meng, X.X. Meng, K. Li, Pilot-scale production of oxygen from air using perovskite hollow fibre membranes, J. Membr. Sci. 352(1–2) (2010) 189–196. [18] Y. Zeng, Y.S. Lin, Oxidative coupling of methane on improved bismuth oxide membrane reactors, AIChE J. 47(2) (2001) 436–444. [19] Y. Zeng, Y.S. Lin, Oxygen permeation and oxidative coupling of methane in yttria doped bismuth oxide membrane reactor, J. Catal. 193(1) (2000) 58–64. [20] Y.P. Lu, A.G. Dixon, W.R. Moser, Y.H. Ma, U. Balachandran, Oxidative coupling of methane using oxygen-permeable dense membrane reactors, Catal. Today 56(1–3) (2000) 297–305. [21] H.P. Pan, L.P. Li, X. Deng, B. Meng, X.Y. Tan, K. Li, Improvement of oxygen permeation in perovskite hollow fibre membranes by the enhanced surface exchange kinetics, J. Membr. Sci. 428(2013) 198–204. [22] X.Y. Tan, Z.G. Wang, H. Liu, S.M. Liu, Enhancement of oxygen permeation through La0.6Sr0.4Co0.2Fe0.8O3-δ hollow fibre membranes by surface modifications, J. Membr. Sci. 324(1–2) (2008) 128–135. [23] J.E. ten Elshof, H.J.M. Bouwmeester, H. Verweij, Oxidative coupling of methane in a mixed-conducting perovskite membrane reactor, Appl. Catal. A: Gen. 130(2) (1995) 195–212. [24] Z. Taheri, K. Nazari, A.A. Safekordi, N. Seyed-Matin, R. Ahmadi, N. Esmaeili, A. Tofigh, Oxygen permeation and oxidative coupling of methane in membrane reactor: A new facile synthesis method for selective perovskite catalyst, J. Mol. Catal. A: Chem. 286(1–2) (2008) 79–86. [25] S.J. Xu, W.J. Thomson, Perovskite-type oxide membranes for the oxidative coupling of methane, AIChE J. 43(S11) (1997) 2731–2740. [26] X.Y. Tan, Z.B. Pang, Z. Gu, S.M. Liu, Catalytic perovskite hollow fibre membrane reactors for methane oxidative coupling, J. Membr. Sci. 302(1–2) (2007) 109–114. [27] N.H. Othman, Z.T. Wu, K. Li, A micro-structured La0.6Sr0.4Co0.2Fe0.8O3-δ hollow fibre membrane reactor for oxidative coupling of methane, J. Membr. Sci. 468(2014) 31–41. [28] H.H. Wang, Y. Cong, W.S. Yang, Oxidative coupling of methane in Ba0.5Sr0.5Co0.8Fe0.2O3-δ tubular membrane reactors, Catal. Today 104(2–4) (2005) 160–167. [29] Z.P. Shao, H. Dong, G.X. Xiong, Y. Cong, W.S. Yang, Performance of a mixedconducting ceramic membrane reactor with high oxygen permeability for methane conversion, J. Membr. Sci. 183(2) (2001) 181–192. [30] N.H. Othman, Z.T. Wu, K. Li, Bi1.5Y0.3Sm0.2O3-d-based ceramic hollow fibre membranes for oxygenseparation and chemicalreactions, J. Membr. Sci. 432(2013) 58–65. [31] S. Bhatia, C.Y. Thien, A.R. Mohamed, Oxidative coupling of methane (OCM) in a catalytic membrane reactor and comparison of its performance with other catalytic reactors, Chem. Eng. J. 148(2–3) (2009) 525–532. [32] Y.T. Liu, X.Y. Tan, K. Li, Nonoxidative methane coupling in a SrCe0.95Yb0.05O3 a (SCYb) hollow fiber membrane reactor, Ind. Eng. Chem. Res. 45(11) (2006) 3782–3790. [33] L.P. Li, J. Song, Q. Lu, X.Y. Tan, Synthesis of nano-crystalline Sm0.5Sr0.5Co(Fe)O3-δ perovskite oxides by a microwave-assisted Sol-gel combustion process, Ceram. Int. 40(1) (2014) 1189–1194. [34] R.D. Shannon, Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides, Acta Crystallogr. Sect. A 32(5) (1976) 751–767. [35] Y.P. Fu, C.S. Weng, Effect of rare-earth ions doped in BaCeO3 on chemical stability, mechanical properties, and conductivity properties, Ceram. Int. 40(7) (2014) 10793–10802. [36] R. Pornprasertsuk, C. Yuwapattanawong, S. Permkittikul, T. Tungtidtham, Preparation of doped BaZrO3 and BaCeO3 from nanopowders, Int. J. Precis. Eng. Manuf. 13(10) (2012) 1813–1819. [37] S. Lee, Oxygen-permeating property of LaSrBFeO3 (B=Co, Ga) perovskite membrane surface-modified by LaSrCoO3, Solid State Ionics 158(3–4) (2003) 287–296. [38] B. Meng, Z.G. Wang, X.Y. Tan, S.M. Liu, SrCo0.9Sc0.1O3-δ perovskite hollow fibre membranes for air separation at intermediate temperatures, J. Eur. Ceram. Soc. 29(13) (2009) 2815–2822. [39] Z.P. Shao, G.X. Xiong, H. Dong, W.S. Yang, L.W. Lin, Synthesis, oxygen permeation study and membrane performance of a Ba0.5Sr0.5Co0.8Fe0.2O3-δ oxygen-permeable dense ceramic reactor for partial oxidation of methane to syngas, Sep. Purif. Technol. 25(1–3) (2001) 97–116. |