SCI和EI收录∣中国化工学会会刊

Chin.J.Chem.Eng. ›› 2016, Vol. 24 ›› Issue (5): 558-571.DOI: 10.1016/j.cjche.2016.03.003

Previous Articles     Next Articles

The control and optimization ofmacro/micro-structure of ion conductive membranes for energy conversion and storage

Xiaoming Yan1,2, Wenji Zheng1, Xuehua Ruan1, Yu Pan1, Xuemei Wu2, Gaohong He1,2   

  1. 1 State Key Laboratory of Fine Chemicals, School of Petroleum and Chemical Engineering, Dalian University of Technology, Panjin, LN 124221, China;
    2 Research and Development Center of Membrane Science and Technology, School of Chemical Engineering, Dalian University of Technology, Dalian, LN 116024, China
  • Received:2015-12-10 Revised:2016-01-26 Online:2016-06-14 Published:2016-05-28
  • Contact: Gaohong He

The control and optimization ofmacro/micro-structure of ion conductive membranes for energy conversion and storage

Xiaoming Yan1,2, Wenji Zheng1, Xuehua Ruan1, Yu Pan1, Xuemei Wu2, Gaohong He1,2   

  1. 1 State Key Laboratory of Fine Chemicals, School of Petroleum and Chemical Engineering, Dalian University of Technology, Panjin, LN 124221, China;
    2 Research and Development Center of Membrane Science and Technology, School of Chemical Engineering, Dalian University of Technology, Dalian, LN 116024, China
  • 通讯作者: Gaohong He

Abstract: Ion conductivemembranes (ICMs) are frequently used as separators for energy conversion and storage technologies of fuel cells, flowbattery, and hydrogen pump, because of their good ion-selective conduction and lowelectronic conductivity. Firstly, this feature article reviews the recent studies on the development of new nonfluorinated ICMs with low cost and their macro/micro-structure control. In general, these new non-fluorinated ICMs have lower conductivity than commercial per-fluorinated ones, due to their poor ion transport channels. Increasing ion exchange capacity (IEC) would create more continuous hydrophilic channels, thus enhancing the conductivity. However, high IEC also expands the overall hydrophilic domains, weakens the interaction between polymer chains, enhances the mobility of polymer chains, and eventually induces larger swelling. The micro-scale expansion and macro-scale swelling of the ICMs with high IEC could be controlled by limiting the mobility of polymer chains. Based on this strategy, some efficient techniques have been developed, including covalent crosslinking, semi-interpenatrating polymer network, and blending. Secondly, this review introduces the optimization of macro/microstructure of both per-fluorinated and non-fluorinated ICMs to improve the performance. Macro-scalemultilayer composite is an efficientway to enhance the mechanical strength and the dimensional stability of the ICMs, and could also decrease the content of perfluorosulfonic acid resin in the membrane, thereby reducing the cost of the per-fluorinated ICMs. Long side chain, multiple functionalization, smallmolecule inducing micro-phase separation, electrospun nanofiber, and organic-inorganic hybrid could construct more efficient ion transport channels, improving the ion conductivity of ICMs.

Key words: Ion conductive membranes, Macrostructure, Microstructure, Optimization

摘要: Ion conductivemembranes (ICMs) are frequently used as separators for energy conversion and storage technologies of fuel cells, flowbattery, and hydrogen pump, because of their good ion-selective conduction and lowelectronic conductivity. Firstly, this feature article reviews the recent studies on the development of new nonfluorinated ICMs with low cost and their macro/micro-structure control. In general, these new non-fluorinated ICMs have lower conductivity than commercial per-fluorinated ones, due to their poor ion transport channels. Increasing ion exchange capacity (IEC) would create more continuous hydrophilic channels, thus enhancing the conductivity. However, high IEC also expands the overall hydrophilic domains, weakens the interaction between polymer chains, enhances the mobility of polymer chains, and eventually induces larger swelling. The micro-scale expansion and macro-scale swelling of the ICMs with high IEC could be controlled by limiting the mobility of polymer chains. Based on this strategy, some efficient techniques have been developed, including covalent crosslinking, semi-interpenatrating polymer network, and blending. Secondly, this review introduces the optimization of macro/microstructure of both per-fluorinated and non-fluorinated ICMs to improve the performance. Macro-scalemultilayer composite is an efficientway to enhance the mechanical strength and the dimensional stability of the ICMs, and could also decrease the content of perfluorosulfonic acid resin in the membrane, thereby reducing the cost of the per-fluorinated ICMs. Long side chain, multiple functionalization, smallmolecule inducing micro-phase separation, electrospun nanofiber, and organic-inorganic hybrid could construct more efficient ion transport channels, improving the ion conductivity of ICMs.

关键词: Ion conductive membranes, Macrostructure, Microstructure, Optimization