1 Maya-Altamira, L., Baun, A., Angelidaki, I., Schmidt, J.E., “Influence of wastewater characteristics on methane potential in food-processing industry wastewaters”, Water Res., 42 (8/9), 2195-2203 (2008). 2 Xu, H., Yu, Q., “Review of methods for biological treatment of food processing wastewater”, In:Proceedings of the 28th Australian Chemical Engineering Conference (Chemeca'2000), Perth, 9-12 (2000). 3 Cristina, G.F., Pedro, P., Cristina, L.C., Pedro, A., “Solids and nutrients removals from the liquid fraction of swine slurry through screening and flocculation treatment and influence of these processes on anaerobic biodegradability”, Bioresource Technol., 99 (14), 6233-6239 (2008). 4 Halil, H., Cumali, K., “Comparison of an SMBR with a CASP system for wastewater reclamation and reuse”, Filtration & Separation, 41 (1), 35-39 (2004). 5 Fikar, M., Chachuat, B., Latifi, M.A., “Optimal operation of alternating activated sludge processes”, Control Engineering Practice, 13 (7), 853-861 (2005). 6 American Public Health Association, Standard Methods for the Examination of Water and Wastewater, 16th edition, American Public Health Association, Washington (1995). 7 Levensipiel, O., Chemical Reaction Engineering, 2nd edition, John Wiley & Sons, New York, 253-315 (1972). 8 Alexander, B.F., Shah, Y.T., “Axial dispersion coefficients in bubble columns”, Chem. Eng. J., 11, 153-156 (1976). 9 Kubsad, V., Chaudhari, S., Gupta, S.K., “Model for oxygen transfer in rotating biological contactor”, Water Res., 38 (20), 4297-4304 (2004). 10 Di Palma, L., Verdone, N., “The effect of disk rotational speed on oxygen transfer in rotating biological contactors”, Bioresource Technol., 100 (3), 1467-1470 (2009). 11 Martin, M., Montes, F.J., Galan, M.A., “On the contribution of the scales of mixing to the oxygen transfer in stirred tanks”, Chem. Eng. J., 145 (2), 232-241 (2008). |