Batch process monitoring based on WGNPE-GSVDD related and independent variables

doi:10.1016/j.cjche.2018.09.022

Chin.J.Chem.Eng. ›› 2018, Vol. 26 ›› Issue (12): 2549-2561.DOI: 10.1016/j.cjche.2018.09.022

• Process Systems Engineering and Process Safety • Previous Articles Next Articles

Batch process monitoring based on WGNPE-GSVDD related and independent variables

Yongyong Hui^1,2, Xiaoqiang Zhao^1,2,3

1 College of Electrical and Information Engineering, Lanzhou University of Technology, Lanzhou 730050, China;
2 Key Laboratory of Gansu Advanced Control for Industrial Processes, Lanzhou University of Technology, Lanzhou 730050, China;
3 National Experimental Teaching Center of Electrical and Control Engineering, Lanzhou University of Technology, Lanzhou 730050, China

Received:2018-05-16 Revised:2018-08-15 Online:2019-01-09 Published:2018-12-28
Contact: Xiaoqiang Zhao
Supported by:
Supported by the National Natural Science Foundation of China (No. 61763029), and the Natural Science Foundation of Gansu Province (1610RJZA016).

Batch process monitoring based on WGNPE-GSVDD related and independent variables

Yongyong Hui^1,2, Xiaoqiang Zhao^1,2,3

1 College of Electrical and Information Engineering, Lanzhou University of Technology, Lanzhou 730050, China;
2 Key Laboratory of Gansu Advanced Control for Industrial Processes, Lanzhou University of Technology, Lanzhou 730050, China;
3 National Experimental Teaching Center of Electrical and Control Engineering, Lanzhou University of Technology, Lanzhou 730050, China

通讯作者: Xiaoqiang Zhao
基金资助:
Supported by the National Natural Science Foundation of China (No. 61763029), and the Natural Science Foundation of Gansu Province (1610RJZA016).

Abstract

Abstract: In many batch processes, there are related or independence relationships among process variables. The traditional monitoring method usually carries out a single statistical model according to the related or independent method, and in the feature extraction there is not fully taken into account the characterization of fault information, it will make the process monitoring ineffective, so a fault monitoring method based on WGNPE (weighted global neighborhood preserving embedding)-GSVDD (greedy support vector data description) related and independent variables is proposed. First, mutual information method is used to separate the related variables and independent variables. Secondly, WGNPE method is used to extract the local and global structures of the related variables in batch process and highlight the fault information, GSVDD method is used to extract the process information of the independent variables quickly and effectively. Finally, the statistical monitoring model is established to achieve process monitoring based on WGNPE and GSVDD. The effectiveness of the proposed method was verified by the penicillin fermentation process.

Key words: Batch process, Monitoring, Related and independent variables, Global-local, Support vector data description

摘要： In many batch processes, there are related or independence relationships among process variables. The traditional monitoring method usually carries out a single statistical model according to the related or independent method, and in the feature extraction there is not fully taken into account the characterization of fault information, it will make the process monitoring ineffective, so a fault monitoring method based on WGNPE (weighted global neighborhood preserving embedding)-GSVDD (greedy support vector data description) related and independent variables is proposed. First, mutual information method is used to separate the related variables and independent variables. Secondly, WGNPE method is used to extract the local and global structures of the related variables in batch process and highlight the fault information, GSVDD method is used to extract the process information of the independent variables quickly and effectively. Finally, the statistical monitoring model is established to achieve process monitoring based on WGNPE and GSVDD. The effectiveness of the proposed method was verified by the penicillin fermentation process.

关键词: Batch process, Monitoring, Related and independent variables, Global-local, Support vector data description

Yongyong Hui, Xiaoqiang Zhao. Batch process monitoring based on WGNPE-GSVDD related and independent variables[J]. Chin.J.Chem.Eng., 2018, 26(12): 2549-2561.

Yongyong Hui, Xiaoqiang Zhao. Batch process monitoring based on WGNPE-GSVDD related and independent variables[J]. Chinese Journal of Chemical Engineering, 2018, 26(12): 2549-2561.

References

[1] I. Monroy, K. Villez, M. Graells, V. Venkatasubramanian, Dynamic process monitoring and fault detection in a batch fermentation process:comparative performance assessment between MPCA and BDPCA, Comput. Aided Chem. Eng. 29(2) (2011) 1371-1375.

[2] J. Wu, W. Luo, X. Wang, C. Qiang, C. Sun, H. Li, A new application of WT-ANN method to control the preparation process of metformin hydrochloride tablets by near infrared spectroscopy compared to PLS, J. Pharmaceut. Biomed. 80(3) (2013) 186-191.

[3] C.K. Yoo, J.-M. Lee, P.A. Vanrolleghem, I.-B. Lee, On-line monitoring of batch processes using multiway independent component analysis, Chemometr. Intell. Lab. Syst. 71(2) (2004) 151-163.

[4] S. Rannar, J.F. Macgregor, S. Wold, Adaptive batch monitoring using hierarchical PCA, Chemometr. Intell. Lab. Syst. 41(1) (1998) 73-81.

[5] W. Ku, R.H. Storer, C. Georgakis, Disturbance detection and isolation by dynamic principal component analysis, Chemometr. Intell. Lab. Syst. 30(1) (1995) 179-196.

[6] J. Chen, K.C. Liu, On-line batch process monitoring using dynamic PCA and dynamic PLS models, Chem. Eng. Sci. 57(1) (2002) 63-75.

[7] J. Huang, X. Yan, Gaussian and non-Gaussian double subspace statistical process monitoring based on principal component analysis and independent component analysis, Ind. Eng. Chem. Res. 54(3) (2015) 1015-1027.

[8] W. Zhu, J. Zhou, X. Xia, C. Li, J. Xiao, H. Xiao, X. Zhang, A novel KICA-PCA fault detection model for condition process of hydroelectric generating unit, Measurement 58(2014) 197-206.

[9] S.T. Roweis, L.K. Saul, Nonlinear dimensionality reduction by locally linear embedding, Science 290(5500) (2000) 2323-2326.

[10] J.B. Tenenbaum, J.C. Langford, A global geometric framework for nonlinear dimensionality reduction, Science 290(5500) (2000) 2319-2323.

[11] M. Belkin, P. Niyogi, Laplacian Eigenmaps for dimensionality reduction and data representation, Neural Comput. 15(6) (2003) 1373-1396.

[12] X. He, P. Niyogi, Locality preserving projections (LPP), Adv. Neural Inf. Proces. Syst. 45(1) (2005) 186-197.

[13] K. Hu, J. Yuan, Statistical monitoring of fed-batch process using dynamic multiway neighborhood preserving embedding, Chemometr. Intell. Lab. Syst. 90(2) (2008) 195-203.

[14] X. He, D. Cai, S. Yan, H.J. Zhang, Neighborhood preserving embedding, Tenth IEEE International Conference on Computer Vision, Beijing 2005, pp. 1208-1213.

[15] M. Zhang, Z. Ge, Z. Song, R. Fu, Global-local structure analysis model and its application for fault detection and identification, Ind. Eng. Chem. Res. 50(11) (2011) 6837-6848.

[16] J. Yu, Local and global principal component analysis for process monitoring, J. Process Control 22(7) (2012) 1358-1373.

[17] X. Zhao, T. Wang, Batch process fault diagnosis based on TGNPE algorithm, CIESC J. 67(3) (2016) 1055-1062.

[18] D.M.J. Tax, R.P.W. Duin, Support vector data description, Mach. Learn. 54(1) (2004) 45-66.

[19] S. Ruixiang, T. Fugee, A kernel-distance-based multivariate control chart using support vector methods, Int. J. Prod. Res. 41(13) (2003) 2975-2989.

[20] A.K. Choudhary, Kernel distance-based robust support vector methods and its application in developing a robust K-chart, Int. J. Prod. Res. 44(1) (2006) 77-96.

[21] S. Thuntee, K. Seoung Bum, T. Fugee, One-class classification-based control charts for multivariate process monitoring, ⅡE Trans. 42(2) (2010) 107-120.

[22] Z. Ge, L. Xie, U. Kruger, L. Lamont, Z. Song, S. Wang, Sensor fault identification and isolation for multivariate non-Gaussian processes, J. Process Control 19(10) (2009) 1707-1715.

[23] Z. Ge, X. Lei, Z. Song, A novel statistical-based monitoring approach for complex multivariate processes, Ind. Eng. Chem. Res. 48(10) (2009) 4892-4898.

[24] X. Liu, L. Xie, U. Kruger, T. Littler, S. Wang, Statistical-based monitoring of multivariate non-Gaussian systems, AIChE J. 54(9) (2008) 2379-2391.

[25] X. Liu, K. Li, M. McAfee, G.W. Irwin, Improved nonlinear PCA for process monitoring using support vector data description, J. Process Control 21(9) (2011) 1306-1317.

[26] D. Huang, T.W.S. Chow, Effective feature selection scheme using mutual information, Neurocomputing 63(2005) 325-343.

[27] M. Han, W. Ren, X. Liu, Joint mutual information-based input variable selection for multivariate time series modeling, Eng. Appl. Artif. Intell. 37(2015) 250-257.

[28] Q. Jiang, X. Yan, Plant-wide process monitoring based on mutual informationmultiblock principal component analysis, ISA Trans. 53(5) (2014) 1516-1527.

[29] J. Huang, X. Yan, Related and independent variable fault detection based on KPCA and SVDD, J. Process Control 39(2016) 88-99.

[30] S. Wold, N. Kettaneh, H. Friden, A. Holmberg, Modelling and diagnostics of batch processes and analogous kinetic experiments, Chemometr. Intell. Lab. Syst. 44(98) (2008) 331-340.

[31] Y. Hui, X. Zhao, Multi-phase batch process monitoring based on multiway weighted global neighborhood preserving embedding method, J. Process Control 69(2018) 44-57.

[32] Q. Chen, R.J. Wynne, P. Goulding, D. Sandoz, The application of principal component analysis and kernel density estimation to enhance process monitoring, Control. Eng. Pract. 8(5) (2000) 531-543.

[33] S.T. Jawaid, S.L. Smith, Submodularity and greedy algorithms in sensor scheduling for linear dynamical systems, Automatica 61(2015) 282-288.

[34] G. Birol, C. Undey, A. Cinar, A modular simulation package for fed-batch fermentation:penicillin production, Comput. Chem. Eng. 26(11) (2002) 1553-1565.

[35] X. Zhao, T. Wang, Tensor dynamic neighborhood preserving embedding algorithm for fault diagnosis of batch process, Chemometr. Intell. Lab. Syst. 162(2017) 94-103.

[36] X. Zhao, T. Wang, Y. Hui, MGNPE-LICA algorithm for fault diagnosis of batch process, Can. J. Chem. Eng. 94(10) (2016) 1947-1954.

[37] C. Yang, J. Hou, Fed-batch fermentation penicillin process fault diagnosis and detection based on support vector machine, Neurocomputing 190(2016) 117-123.

Batch process monitoring based on WGNPE-GSVDD related and independent variables

Batch process monitoring based on WGNPE-GSVDD related and independent variables

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Xiongzhuo Zhu, Dali Gao, Chong Yang, Chunjie Yang. A blast furnace fault monitoring algorithm with low false alarm rate: Ensemble of greedy dynamic principal component analysis-Gaussian mixture model [J]. Chinese Journal of Chemical Engineering, 2023, 57(5): 151-161.
[2]	Fangyuan Ma, Cheng Ji, Jingde Wang, Wei Sun. Early identification of process deviation based on convolutional neural network [J]. Chinese Journal of Chemical Engineering, 2023, 56(4): 104-118.
[3]	Lutai Song, Li Liu, Mingyuan Zhu, Bin Dai. Process monitoring of the Au-S bond conversion in acetylene hydrochlorination [J]. Chinese Journal of Chemical Engineering, 2022, 45(5): 32-40.
[4]	Weipeng Lu, Xuefeng Yan. Balanced multiple weighted linear discriminant analysis and its application to visual process monitoring [J]. Chinese Journal of Chemical Engineering, 2021, 36(8): 128-137.
[5]	Yuan Li, Dongsheng Yang. Local component based principal component analysis model for multimode process monitoring [J]. Chinese Journal of Chemical Engineering, 2021, 34(6): 116-124.
[6]	Juntian Xiao, Qian Sun, Liying Liu, Zhongwei Ding. Monitoring the spontaneous wetting process of hydrophobic microporous membrane assisted by alternating current impedance spectroscopy [J]. Chinese Journal of Chemical Engineering, 2021, 39(11): 96-102.
[7]	Yun Wang, Yuchen He, De Gu. Quality oriented multimode processes monitoring based on a novel hierarchical common and specific structure with different order information [J]. Chinese Journal of Chemical Engineering, 2021, 39(11): 183-192.
[8]	Racheal Aigbe, Doga Kavaz. Unravel the potential of zinc oxide nanoparticle-carbonized sawdust matrix for removal of lead (II) ions from aqueous solution [J]. Chinese Journal of Chemical Engineering, 2021, 29(1): 92-102.
[9]	Muhammad Nawaz, Abdulhalim Shah Maulud, Haslinda Zabiri, Syed Ali Ammar Taqvi, Alamin Idris. Improved process monitoring using the CUSUM and EWMA-based multiscale PCA fault detection framework [J]. Chinese Journal of Chemical Engineering, 2021, 29(1): 253-265.
[10]	Denglong Ma, Jianmin Gao, Zhiyong Gao, Hongquan Jiang, Zaoxiao Zhang, Juntai Xie. Gas leakage recognition for CO₂ geological sequestration based on the time series neural network [J]. Chinese Journal of Chemical Engineering, 2020, 28(9): 2343-2357.
[11]	Shutian Chen, Qingchao Jiang, Xuefeng Yan. Multimodal process monitoring based on transition-constrained Gaussian mixture model [J]. Chinese Journal of Chemical Engineering, 2020, 28(12): 3070-3078.
[12]	Pengbao Lian, Qiang Liu, Lizhen Chen, Cai Cao, Jiaxiang Zhao, Jianlong Wang. Determination and correlation solubility of 4-nitroimidazole in twelve pure solvents from 278.15 K to 323.15 K [J]. Chinese Journal of Chemical Engineering, 2020, 28(10): 2634-2639.
[13]	Aihong Li, Changzhan Liu, Zhiyong Liu. A heuristic design method for batch water-using networks of multiple contaminants with regeneration unit [J]. Chinese Journal of Chemical Engineering, 2019, 27(5): 1103-1112.
[14]	Li Jia, Wendan Tan. Just-in-time learning based integrated MPC-ILC control for batch processes [J]. Chin.J.Chem.Eng., 2018, 26(8): 1713-1720.
[15]	Honggui Han, Shuguang Zhu, Junfei Qiao, Min Guo. Data-driven intelligent monitoring system for key variables in wastewater treatment process [J]. Chin.J.Chem.Eng., 2018, 26(10): 2093-2101.