SCI和EI收录∣中国化工学会会刊

Chinese Journal of Chemical Engineering ›› 2019, Vol. 27 ›› Issue (11): 2659-2665.DOI: 10.1016/j.cjche.2019.02.033

• Fluid Dynamics and Transport Phenomena • Previous Articles     Next Articles

Modeling bubble column reactor with the volume of fluid approach: Comparison of surface tension models

Qi Liu, Zhenghong Luo   

  1. Department of Chemical Engineering, College of Chemistry and Chemical Engineering, State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, China
  • Received:2018-10-29 Revised:2019-02-26 Online:2020-01-19 Published:2019-11-28
  • Contact: Zhenghong Luo
  • Supported by:
    Supported by the National Ministry of Science and Technology of China (2017YFB0602401), the National Natural Science Foundation of China (21776173, 91834303, U1862201, 21625603), the Program of Shanghai Subject Chief Scientists (18XD1402000).

Modeling bubble column reactor with the volume of fluid approach: Comparison of surface tension models

Qi Liu, Zhenghong Luo   

  1. Department of Chemical Engineering, College of Chemistry and Chemical Engineering, State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, China
  • 通讯作者: Zhenghong Luo
  • 基金资助:
    Supported by the National Ministry of Science and Technology of China (2017YFB0602401), the National Natural Science Foundation of China (21776173, 91834303, U1862201, 21625603), the Program of Shanghai Subject Chief Scientists (18XD1402000).

Abstract: This work aims at comparing surface tension models in VOF (Volume of Fluid) modeling and investigating the effects of gas distributor and gas velocity. Hydrodynamics of a continuous chain of bubbles inside a bubble column reactor was simulated. The grid independence study was first conducted and a grid size of 1.0 mm was adopted in order to minimize the computing time without compromising the accuracy of the results. The predictions were validated by comparing the experimental studies reported in the literature. It was found that all surface tension models can describe the bubble rise and bubble plume in a column with slight deviations.

Key words: Bubble column reactor, Computational fluid dynamics, Volume of fluid method, Surface tension models, Gas distributor

摘要: This work aims at comparing surface tension models in VOF (Volume of Fluid) modeling and investigating the effects of gas distributor and gas velocity. Hydrodynamics of a continuous chain of bubbles inside a bubble column reactor was simulated. The grid independence study was first conducted and a grid size of 1.0 mm was adopted in order to minimize the computing time without compromising the accuracy of the results. The predictions were validated by comparing the experimental studies reported in the literature. It was found that all surface tension models can describe the bubble rise and bubble plume in a column with slight deviations.

关键词: Bubble column reactor, Computational fluid dynamics, Volume of fluid method, Surface tension models, Gas distributor