Upgrading Siberian (Russia) crude oil by hydrodesulfurization in a slurry reactor: A kinetic study

doi:10.1016/j.cjche.2020.04.020

Abstract

Abstract: Hydrodesulfurization (HDS) of sour crude oil is an effective way to address the corrosion problems in refineries, and is an economic way to process sour crude oil in an existing refinery built for sweet oil. In the current study, the HDS of Siberian crude oil was carried out in a slurry reactor. The Co-Mo, Ni-Mo, and Ni-W catalysts supported on γ-Al₂O₃ were compared at the temperature of 340℃ and the pressure of 4.5 MPa. The HDS activity follows the order of Co-Mo > Ni-Mo > Ni-W at a high concentration of H₂S, and the difference between Co-Mo and Ni-Mo becomes insignificant at a low concentration of H₂S. The influence of reaction temperature 320-360℃ and reaction pressure 3-5.5 MPa was investigated, and both play a positive role in the HDS reaction. A kinetic model over Ni-Mo/Al₂O₃ in the slurry reactor was established. The activation energy is estimated as 60.34 kJ·mol^-1; the orders of sulfur components and hydrogen partial pressure are 1.43 and 1.30, respectively. The kinetic parameters are compared with those in a trickle-bed reactor, implying that the mass transfer is greatly enhanced in the slurry reactor. The back mixing effect is present in the slurry reactor and can be reduced by a multi-stage design, which would lead to higher reactor efficiency in industrial application.

Key words: HDS, Sour crude oil, Slurry reactor, Kinetics, Multiphase reaction, Russia crude oil

摘要： Hydrodesulfurization (HDS) of sour crude oil is an effective way to address the corrosion problems in refineries, and is an economic way to process sour crude oil in an existing refinery built for sweet oil. In the current study, the HDS of Siberian crude oil was carried out in a slurry reactor. The Co-Mo, Ni-Mo, and Ni-W catalysts supported on γ-Al₂O₃ were compared at the temperature of 340℃ and the pressure of 4.5 MPa. The HDS activity follows the order of Co-Mo > Ni-Mo > Ni-W at a high concentration of H₂S, and the difference between Co-Mo and Ni-Mo becomes insignificant at a low concentration of H₂S. The influence of reaction temperature 320-360℃ and reaction pressure 3-5.5 MPa was investigated, and both play a positive role in the HDS reaction. A kinetic model over Ni-Mo/Al₂O₃ in the slurry reactor was established. The activation energy is estimated as 60.34 kJ·mol^-1; the orders of sulfur components and hydrogen partial pressure are 1.43 and 1.30, respectively. The kinetic parameters are compared with those in a trickle-bed reactor, implying that the mass transfer is greatly enhanced in the slurry reactor. The back mixing effect is present in the slurry reactor and can be reduced by a multi-stage design, which would lead to higher reactor efficiency in industrial application.

关键词: HDS, Sour crude oil, Slurry reactor, Kinetics, Multiphase reaction, Russia crude oil

Kening Sun, Xixi Ma, Qiuchen Yang, Rui Qiu, Ruijun Hou. Upgrading Siberian (Russia) crude oil by hydrodesulfurization in a slurry reactor: A kinetic study[J]. Chinese Journal of Chemical Engineering, 2020, 28(12): 3027-3034.

Kening Sun, Xixi Ma, Qiuchen Yang, Rui Qiu, Ruijun Hou. Upgrading Siberian (Russia) crude oil by hydrodesulfurization in a slurry reactor: A kinetic study[J]. 中国化学工程学报, 2020, 28(12): 3027-3034.

References

[1] A.T. Jarullah, I.M. Mujtaba, A.S. Wood, Improvement of the middle distillate yields during crude oil hydrotreatment in a Trickle-Bed Reactor, Energy Fuel 25(2) (2011) 773-781.
[2] T.T. Nguyen, E.W. Qian, Synthesis of mesoporous Ti-inserted SBA-15 and CoMo/TiSBA-15 catalyst for hydrodesulfurization and hydrodearomatization, Microporous Mesoporous Mater. 265(2018) 1-7.
[3] R. Obeso-Estrella, J.L.G. Fierro, J.N.D. de León, S. Fuentes, G. Alonso-Nuñez, E. LugoMedina, B. Pawelec, T.A. Zepeda, Effect of partial Mo substitution by W on HDS activity using sulfide CoMoW/Al₂CO₃-TiO₂ catalysts, Fuel 233(2018) 644-657.
[4] H.B. Park, Y.K. Lee, Designing supported NiMoS₂ catalysts for hydrocracking of vacuum residue, Fuel 239(2019) 1265-1273.
[5] A.N. Varakin, A.V. Mozhaev, A.A. Pimerzin, P.A. Nikulshin, Comparable investigation of unsupported MoS₂ hydrodesulfurization catalysts prepared by different techniques:Advantages of support leaching method, Appl. Catal., B 238(2018) 498-508.
[6] T.C. Ho, A theory of ultradeep hydrodesulfurization of diesel in stacked-bed reactors, AIChE J. 64(2) (2018) 595-605.
[7] M. Xu, H. Liu, S.F. Ji, C.Y. Li, Intensification of deep hydrodesulfurization through a two-stage combination of monolith and trickle bed reactors, Chin. J. Chem. Eng. 22(8) (2014) 888-897.
[8] H. Yamada, S. Goto, Advantages of counter-current operation for hydrodesulfurization in trickle bed reactors, Korean J. Chem. Eng. 21(4) (2004) 773-776.
[9] G. Chen, Z. Hu, Summary on production technology of 1.4 Mt/a hydrocracking plant processing coker gatch, Qilu Petrochem. Techno. 2(2006) 114-118(in Chinese).
[10] G. Marroquín, J. Ancheyta, C. Esteban, A batch reactor study to determine effectiveness factors of commercial HDS catalyst, Catal. Today 104(1) (2005) 70-75.
[11] T.F. Wang, J.F. Wang, Y. Jin, Slurry reactors for gas-to-liquid processes:A review, Ind. Eng. Chem. Res. 46(18) (2007) 5824-5847.
[12] Z. Deng, T. Wang, Z. Wang, Hydrodesulfurization of diesel in a slurry reactor, Chem. Eng. Sci. 65(1) (2010) 480-486.
[13] B. Khadem-Hamedani, S. Yaghmaei, M. Fattahi, S. Mashayekhan, S.M. HosseiniArdali, Mathematical modeling of a slurry bubble column reactor for hydrodesulfurization of diesel fuel:Single- and two-bubble configurations, Chem. Eng. Res. Des. 100(2015) 362-376.
[14] Y. Liu, S. Song, D. Xuan, W. Huang, Diesel ultra-deep hydrodesulfurization over trimetallic WMoNi catalysts by liquid-phase preparation method in slurry bed reactor, Energy Fuel 31(7) (2017) 7372-7381.
[15] H. Xiang, T. Wang, Kinetic study of hydrodesulfurization of coker gas oil in a slurry reactor, Front. Chem. Sci. Eng. 7(2) (2013) 139-144.
[16] C.J. Calderón, J. Ancheyta, Dynamic modeling and simulation of a slurry-phase reactor for hydrotreating of oil fractions, Energy Fuel 31(5) (2017) 5691-5700.
[17] H. Ortiz-Moreno, J. Ramírez, F. Sanchez-Minero, R. Cuevas, J. Ancheyta, Hydrocracking of Maya crude oil in a slurry-phase batch reactor. II. Effect of catalyst load, Fuel 130(2014) 263-272.
[18] M.K. Andari, F. AbuSeedo, A. Stanislaus, H.M. Qabazard, Kinetics of individual sulfur compounds in deep hydrodesulfurization of Kuwait diesel oil, Fuel 75(14) (1996) 1664-1670.
[19] N.K. Nag, A.V. Sapre, D.H. Broderick, B.C. Gates, Hydrodesulfurization of polycyclic aromatics catalyzed by sulfided CoOMoO₃γ-Al₂CO₃:The relative reactivities, J. Catal. 57(3) (1979) 509-512.
[20] M. Egorova, Hydrodesulfurization of dibenzothiophene and 4,6-dimethyldibenzothiophene over sulfided NiMo/γ-Al₂CO₃, CoMo/γ-Al₂CO₃, and Mo/γ-Al₂CO₃ catalysts, J. Catal. 225(2) (2004) 417-427.
[21] R.J. Hou, K. Chang, J.G.G. Chen, T.F. Wang, Replacing precious metals with carbide catalysts for hydrogenation reactions, Top. Catal. 58(4-6) (2015) 240-246.
[22] M. Breysse, M. Cattenot, T. Decamp, R. Frety, C. Gachet, M. Lacroix, C. Leclercq, L. de Mourgues, J.L. Portefaix, M. Vrinat, Influence of sulphidation conditions on the properties of NiW/Al₂CO₃ hydrotreating catalysts, Catal. Today 4(1) (1988) 39-55.
[23] J.C. Duchet, J.C. Lavalley, S. Housni, D. Ouafi, J. Bachelier, M. Lakhdar, A. Mennour, Carbon monoxide and oxygen chemisorption and functionalities of sulphided NiW/Al₂CO₃ hydrotreating catalysts, Catal. Today 4(1) (1988) 71-96.
[24] C.H. Kim, W.L. Yoon, I.C. Lee, S.I. Woo, The effect of Ni loading and the sulfidation temperature on the structure and catalytic activity of NiW hydrodesulfurization catalysts, Appl. Catal., B 144(1-2) (1996) 159-175.
[25] B. Scheffer, N.J.J. Dekker, P.J. Mangnus, J.A. Moulijn, A temperature-programmed reduction study of sulfided CoMo/Al₂CO₃ hydrodesulfurization catalysts, J. Catal. 121(1) (1990) 31-46.
[26] F. Bataille, J.L. Lemberton, P. Michaud, G. Pérot, M. Vrinat, M. Lemaire, E. Schulz, M. Breysse, S. Kasztelan, Alkyldibenzothiophenes hydrodesulfurization-promoter effect, reactivity and reaction mechanism, J. Catal. 191(2) (2000) 409-422.
[27] D.D. Li, Hydrotreating Technology and Engineering, China Sinopec Press, Beijing, 2004.
[28] H. Li, Q. Sun, X. Wang, Analysis of difficulties in the operation of fixed-bed residue hydrotreating unit and countermeasures, Pet. Ref. Eng. 48(12) (2018) 25-29.