Numerical simulation and experimental study of the characteristics of packing feature size on liquid flow in a rotating packed bed

doi:10.1016/j.cjche.2020.09.063

Abstract

Abstract: Rotating packed bed has high efficiency of gas–liquid mass transfer. So it is significant to investigate fluid motion in rotating packed bed. Numerical simulations of the effects of packing feature size on liquid flow characteristics in a rotating packed bed are reported in this paper. The particle image velocimetry is compared with the numerical simulations to validate the turbulent model. Results show that the liquid exists in the packing zone in the form of droplet and liquid line, and the cavity is droplet. When the radial thickness of the packing is less than 0.101 m, liquid line and droplets appear in the cavity. When rotational speed and radial thickness of the packing increase, the average diameter of the droplets becomes smaller, and the droplet size distribution becomes uniform. As the initial velocity of the liquid increases, the average droplet diameter increases and the uniformity of particle size distribution become worse. The droplet velocity increases with the radial thickness of the packing increasing, and gradually decreases when it reaches the cavity region. The effect of packing thickness is most substantial through linear fitting. The predicted and simulated values are within ±15%. The cumulative volume distribution curves of the experimental and simulated droplets are consistent with the R-R distribution.

Key words: Chemical process strengthening equipment, Rotating packed bed, Computational fluid dynamics, Particle image velocimetry, Sieve packing

摘要： Rotating packed bed has high efficiency of gas–liquid mass transfer. So it is significant to investigate fluid motion in rotating packed bed. Numerical simulations of the effects of packing feature size on liquid flow characteristics in a rotating packed bed are reported in this paper. The particle image velocimetry is compared with the numerical simulations to validate the turbulent model. Results show that the liquid exists in the packing zone in the form of droplet and liquid line, and the cavity is droplet. When the radial thickness of the packing is less than 0.101 m, liquid line and droplets appear in the cavity. When rotational speed and radial thickness of the packing increase, the average diameter of the droplets becomes smaller, and the droplet size distribution becomes uniform. As the initial velocity of the liquid increases, the average droplet diameter increases and the uniformity of particle size distribution become worse. The droplet velocity increases with the radial thickness of the packing increasing, and gradually decreases when it reaches the cavity region. The effect of packing thickness is most substantial through linear fitting. The predicted and simulated values are within ±15%. The cumulative volume distribution curves of the experimental and simulated droplets are consistent with the R-R distribution.

关键词: Chemical process strengthening equipment, Rotating packed bed, Computational fluid dynamics, Particle image velocimetry, Sieve packing

Xifan Duan, Zhiguo Yuan, Youzhi Liu, Hangtian Li, Weizhou Jiao. Numerical simulation and experimental study of the characteristics of packing feature size on liquid flow in a rotating packed bed[J]. Chinese Journal of Chemical Engineering, 2021, 34(6): 22-31.

References

[1] H. Guan, C.S. Zhang, Study on flue gas desulfurization by ethylene diaminecitrate solution, Chem. Prod. Technol. 23(4) (2016) 31-33.
[2] G. Zheng, Z. Li, B. Qu, Z. Gao, Investigation of flow fields in an agitated vessel with dual CBY impellers using particle image velocimetry under low Reynolds number, Petrochemical Technology, 40(1)(2011) 60-64.
[3] Z.C. An, PIV experimental research and numerical simulation study on flow field on the mechanical agitation tank, Ph. D. Thesis, Harbin Institute of Technology, 2013.
[4] J. Zhang, The investigation of flow characteristics of free impinging jets reactors, Ph. D. Thesis North University of China, 2016.
[5] H.J. Liu. Study on hydrodynamic characteristics of rotating bed of annular sieve plate, Ph. D. Thesis, North University of China, 2017.
[6] J.R. Burns, C. Ramshaw, Process intensification:visual study of liquid maldistribution in rotating packed beds, Chem. Eng. Sci. 51(8) (1996) 1347-1352.
[7] W. Guo. A study on liquid flowing inside the higee rotor, Ph. D. Thesis, Beijing University of Chemical Technology, 1996.
[8] J. Zhang. Experimental study and computational simulation of liquid flow and mass transfer in a rotating bed, Ph. D. Thesis. Beijing University of Chemical Technology, 1996.
[9] W. Yang, G. Chu, H. Zou, J.F. Chen, PIV study of fluid microfluidic flow in a rotating bed, J. Beijing Univ. Chem. Technol. (Nat. Sci. Ed.) 38(2) (2011) 7-11.
[10] R.L. Sun, Y. Xiang, Y.C. Yang, H.K. Zou, G.W. Chu, L. Shao, J.F. Chen, Visualization of liquid flow in a supergravity rotating bed, J. Chem. Eng. Chinese Univ. 3(2013) 411-416.
[11] L. Sang, Y. Luo, G.W. Chu, J.P. Zhang, Y. Xing, J.F. Chen, Liquid flow pattern transition, droplet diameter and size distribution in the cavity zone of a rotating packed bed:A visual study, Chem. Eng. Sci. 158(2017) 429-438.
[12] Z. Gao, S. Ma, D. Shi, J.N. Wang, Y.Y. Bao, Z.Q. Cai, Droplet characteristics and behaviors in a high-speed disperser, Chem. Eng. Sci. 126(2015) 329-340.
[13] R.F.L. Cerqueira, E.E. Paladino, B.K. Ynumaru, C.R. Maliska, Image processing techniques for the measurement of two-phase bubbly pipe flows using particle image and tracking velocimetry (PIV/PTV), Chem. Eng. Sci. 189(2018) 1-23.
[14] P. Xie, X. Lu, X. Yang, Y. Xin, I. Dereak, M. Lin, P. Mohamed, Characteristics of liquid flow in a rotating packed bed for CO₂, capture:A CFD analysis, Chem. Eng. Sci. 172(2017) 216-229.
[15] T.Y. Guo, K.P. Cheng, L.X. Wen, Ronnie Andersson, J.F. Chen, Three-dimensional simulation on liquid flow in a rotating packed bed reactor, Ind. Eng. Chem. Res. 56(2017) 8169-8179.
[16] W. Yang, Y. Wang, J. Chen, Three-dimensional numerical simulation of phase flow field in rotating packed sheets, Chinese Sciencepaper 4(3) (2009) 188-192.
[17] L.M. Edgar, R. Jaimes, J.L. Gomez, Rubens Maciel Filho, CFD simulation of threedimensional multiphase flow in a rotating packed bed, Comput. Aided Chem. Eng. 30(2012) 1158-1162.
[18] X. Shi, Y. Xiang, L. Wen, J.F. Chen, Flow field analysis in a rotating packed bed based on discrete phase model, J. Chem. Eng. Chinese Univ. 26(3) (2012) 388-394.
[19] X. Shi, Y. Xiang, L.X. Wen, J.F. Chen, CFD analysis of liquid phase flow in a rotating packed bed reactor, Chem. Eng. J. 228(2013) 1040-1049.
[20] H.T. Li, Z.G. Yuan, Y.Z. Liu, H.J. Liu, Characteristics of liquid flow in a countercurrent rotating bed, Chem. Eng. Process. Process Intensif. 136(2019) 72-81.
[21] C.C. Xu, W.Z. Jiao, Y.Z. Liu, L. Guo, Z.G. Yuan, Q.L. Zhang, Effects of airflow field on droplets diameter inside the corrugated packing of a rotating packed bed, China Petrol. Process. Petrochem. Technol. 16(4) (2014) 38-46.
[22] Y. Ouyang, H.K. Zou, X.Y. Gao, G.W. Wen, X. Yang, J.F. Chen, Computational fluid dynamics modeling of viscous liquid flow characteristics and end effect in rotating packed bed, Chem. Eng. Process. Process Intensif. 123(2018) 185-194.
[23] X. Lu, P. Xie, D.B. Ingham, L. Ma, M. Pourkashanian, A porous media model for CFD simulations of gas-liquid two-phase flow in rotating packed beds, Chem. Eng. Sci. 189(2018) 123-134.
[24] X. Lu, P. Xie, D.B. Ingham, L. Ma, M. Pourkashanian, Modelling of CO2 absorption in a rotating packed bed using an Eulerian porous media approach, Chem. Eng. Sci. 199(2019) 302-318.
[25] P. Xie, X. Lu, H. Ding, Y. Xin, I. Derek, L.P. Mohamed. Ma, A mesoscale 3D CFD analysis of the liquid flow in a rotating packed bed, Chem. Eng. Sci. 199(2019) 528-545.
[26] H.H. Mortensen, D. Arlov, F. Innings, A. Håkansson, A validation of commonly used CFD methods applied to rotor stator mixers using PIV measurements of fluid velocity and turbulence, Chem. Eng. Sci. 177(2018) 340-353.
[27] Q. Ouyang, K. Tang, X. Yang, H.K. Zou, G.W. Chu, R.K. Agarwal, J.F. Chen, Evaluation of various turbulence models for numerical simulation of a multiphase system in a rotating packed bed, Comput. Fluids 194(2019) 104-296.
[28] G.Y. Liu, Fluid Simulation and Application Based on Fluent Simulation Calculation and Application Example, Metallurgical Industry Press, Beijing, 2017.
[29] P. Rosin, E. Rammler, The laws governing the fineness of powdered coal, J. Inst. Fuel 31(1933) 29-36.