Chinese Journal of Chemical Engineering ›› 2021, Vol. 36 ›› Issue (8): 76-85.DOI: 10.1016/j.cjche.2020.09.026
• Separation Science and Engineering • Previous Articles Next Articles
Chunxiao Zhang1, Yingjie Li1, Zhiguo Bian1, Wan Zhang1, Zeyan Wang2
Chunxiao Zhang1, Yingjie Li1, Zhiguo Bian1, Wan Zhang1, Zeyan Wang2
|  X. Zhang, Y. Geng, S. Shao, J. Wilson, X. Song, W. You, China's non-fossil energy development and its 2030 CO2 reduction targets:The role of urbanization, Appl. Energy 261(2020) 114353.
 Y. Duan, L. Duan, J. Wang, E.J. Anthony, Observation of simultaneously low CO, NOx and SO2 emission during oxycoal combustion in a pressurized fluidized bed, Fuel 242(2019) 374-381.
 D. Bielsa, A. Zaki, P.L. Arias, A. Faik, Improving the redox performance of Mn2O3/Mn3O4 pair by Si doping to be used as thermochemical energy storage for concentrated solar power plants, Sol. Energy 204(2020) 144-154.
 L. Andre, S. Abanades, G. Flamant, Screening of thermochemical systems based on solid-gas reversible reactions for high temperature solar thermal energy storage, Renew. Sust. Energ. Rev. 64(2016) 703-715.
 I. Fujii, K. Tsuchiya, M. Higano, J. Yamada, Studies of an energy-storage system by use of the reversible chemical-reaction-CaO+H2O reversible Ca(OH)2, Sol. Energy 34(1985) 367-377.
 J. Samms, B.E. Evans, Thermal dissociation of Ca(OH)2 at elevated pressures, J. Appl. Chem. 18(1968) 5-8.
 Y.A. Criado, M. Alonso, J.C. Abanades, Z. Anxionnaz-Minvielle, Conceptual process design of a CaO/Ca(OH)2 thermochemical energy storage system using fluidized bed reactors, Appl. Therm. Eng. 73(2014) 1087-1094.
 M. Schmidt, M. Linder, Power generation based on the Ca(OH)2/CaO thermochemical storage system-experimental investigation of discharge operation modes in lab scale and corresponding conceptual process design, Appl. Energy 203(2017) 594-607.
 M. Schmidt, A. Gutierrez, M. Linder, Thermochemical energy storage with CaO/Ca(OH)2-experimental investigation of the thermal capability at low vapor pressures in a lab scale reactor, Appl. Energy 188(2017) 672-681.
 F. Schaube, I. Utz, A. Woerner, H. Mueller-Steinhagen, De- and rehydration of Ca(OH)2 in a reactor with direct heat transfer for thermo-chemical heat storage. Part B:Validation of model, Chem. Eng. Res. Des. 91(2013) 865-873.
 G. Seitz, R. Helmig, H. Class, A numerical modeling study on the influence of porosity changes during thermochemical heat storage, Appl. Energy 259(2020) 114152.
 M. Schmidt, C. Szczukowski, C. Rosskopf, M. Linder, A. Woerner, Experimental results of a 10 kW high temperature thermochemical storage reactor based on calcium hydroxide, Appl. Therm. Eng. 62(2014) 553-559.
 F. Schaube, A. Kohzer, J. Schuetz, A. Woerner, H. Mueller-Steinhagen, De- and rehydration of Ca(OH)2 in a reactor with direct heat transfer for thermochemical heat storage. Part A:Experimental results, Chem. Eng. Res. Des. 91(2013) 856-864.
 S. Lin, Y. Wang, Y. Suzuki, High-temperature CaO hydration/Ca(OH)2 decomposition over a multitude of cycles, Energ. Fuel. 23(2009) 2855-2861.
 I. Fujii, M. Ishino, S. Akiyama, M.S. Murthy, K.S. Rajanandam, Behavior of Ca (OH)2/CaO pellet under dehydration and hydration, Sol. Energy 53(1994) 329-341.
 K.G. Sakellariou, N.I. Tsongidis, G. Karagiannakis, A.G. Konstandopoulos, Shortlisting of composite CaO-based structured bodies suitable for thermochemical heat storage with the CaO/Ca(OH)2 reaction scheme, Energ. Fuel. 31(2017) 6548-6559.
 C. Rosskopf, M. Haas, A. Faik, M. Linder, A. Woerner, Improving powder bed properties for thermochemical storage by adding nanoparticles, Energ. Convers. Manage. 86(2014) 93-98.
 M. Gollsch, S. Afflerbach, B.V. Angadi, M. Linder, Investigation of calcium hydroxide powder for thermochemical storage modified with nanostructured flow agents, Sol. Energy 201(2020) 810-818.
 Y.A. Criado, M. Alonso, J. Carlos Abanades, Enhancement of a CaO/Ca(OH)2 based material for thermochemical energy storage, Sol. Energy 135(2016) 800-809.
 M.N. Azpiazu, J.M. Morquillas, A. Vazquez, Heat recovery from a thermal energy storage based on the Ca(OH)2/CaO cycle, Appl. Therm. Eng. 23(2003) 733-741.
 J. Yan, C.Y. Zhao, Z.H. Pan, The effect of CO2 on Ca(OH)2 and Mg(OH)2 thermochemical heat storage systems, Energy 124(2017) 114-123.
 T. Shikang, Z. Shuquan, L.I. Yuqi, J.C. Abanades, Steam coal utilization and carbon capture and storage in China, Clean Coal Technol. (2014) 66-69.
 L. Ma, C. Qin, S. Pi, H. Cui, Fabrication of efficient and stable Li4SiO4-based sorbent pellets via extrusion-spheronization for cyclic CO2 capture, Chem. Eng. J. 379(2020) 122385.
 Z. Ma, S. Wu, Y. Li, Research progress of CO2 capture with the assist CaO-based energy storage materials at coal-fired power station, Clean Coal Technol. 25(2019) 1-8.
 Y. Yuan, H. You, L. Ricardez-Sandoval, Recent advances on first-principles modeling for the design of materials in CO2 capture technologies, Chinese J. Chem. Eng. 27(2019) 1554-1565.
 T. Shimizu, T. Hirama, H. Hosoda, K. Kitano, M. Inagaki, K. Tejima, A twin fluidbed reactor for removal of CO2 from combustion processes, Chem. Eng. Res. Des. 77(1999) 62-68.
 C.C. Dean, J. Blamey, N.H. Florin, M.J. Al-Jeboori, P.S. Fennell, The calcium looping cycle for CO2 capture from power generation, cement manufacture and hydrogen production, Chem. Eng. Res. Des. 89(2011) 836-855.
 A. MacKenzie, D.L. Granatstein, E.J. Anthony, J.C. Abanades, Economics of CO2 capture using the calcium cycle with a pressurized fluidized bed combustor, Energ. Fuel. 21(2007) 920-926.
 J. Blamey, E.J. Anthony, J. Wang, P.S. Fennell, The calcium looping cycle for large-scale CO2 capture, Prog. Energ. Combust. 36(2010) 260-279.
 P. Sun, J.R. Grace, C.J. Lim, E.J. Anthony, The effect of CaO sintering on cyclic CO2 capture in energy systems, AIChE J. 53(2007) 2432-2442.
 Z. Li, Y. Liu, N. Cai, Understanding the enhancement effect of high-temperature steam on the carbonation reaction of CaO with CO2, Fuel 127(2014) 88-93.
 J. Blamey, V. Manovic, E.J. Anthony, D.R. Dugwell, P.S. Fennell, On steam hydration of CaO-based sorbent cycled for CO2 capture, Fuel 150(2015) 269-277.
 B. Arias, G.S. Grasa, M. Alonso, J. Carlos-Abanades, Post-combustion calcium looping process with a highly stable sorbent activity by recarbonation, Energ. Environ. Sci. 5(2012) 7353-7359.
 X. Liu, J. Shi, L. He, X. Ma, S. Xu, Modification of CaO-based sorbents prepared from calcium acetate for CO2 capture at high temperature, Chinese J. Chem. Eng. 25(2017) 572-580.
 J. Chen, T. Shi, L. Duan, Z. Sun, E.J. Anthony, Microemulsion-derived, nanostructured CaO/CuO composites with controllable particle grain size to enhance cyclic CO2 capture performance for combined Ca/Cu looping process, Chem. Eng. J. 393(2020) 124716.
 C. Luo, Y. Zheng, N. Ding, Q. Wu, G. Bian, C. Zheng, Development and performance of CaO/La2O3 sorbents during calcium looping cycles for CO2 capture, Ind. Eng. Chem. Res. 49(2010) 11778-11784.
 J. Chen, L. Duan, Z. Sun, Accurate control of cage-like CaO hollow microspheres for enhanced CO2 capture in calcium looping via a template-assisted synthesis approach, Environ. Sci. Technol. 53(2019) 2249-2259.
 V. Manovic, E.J. Anthony, D. Loncarevic, CO2 looping cycles with CaO-based sorbent pretreated in CO2 at high temperature, Chem. Eng. Sci. 64(2009) 3236-3245.
 S.M. Hashemi, D. Karami, N. Mahinpey, Solution combustion synthesis of zirconia-stabilized calcium oxide sorbents for CO2 capture, Fuel 269(2020) 117432.
 F.N. Ridha, V. Manovic, A. Macchi, M.A. Anthony, E.J. Anthony, Assessment of limestone treatment with organic acids for CO2 capture in Ca-looping cycles, Fuel Process. Technol. 116(2013) 284-291.
 Y. Li, C. Zhao, C. Qu, L. Duan, Q. Li, C. Liang, CO2 capture using CaO modified with ethanol/water solution during cyclic calcination/carbonation, Chem. Eng. Technol. 31(2008) 237-244.
 A. Nawar, H. Ghaedi, M. Ali, M. Zhao, N. Iqbal, R. Khan, Recycling waste-derived marble powder for CO2 capture, Process Saf. Environ. 132(2019) 214-225.
 W. Wang, W. Liu, J. Sun, Y. Hu, Y. Yang, C. Wen, Reactivation of CaO-based sorbents via multi-acidification under N2 or oxy-fuel (with and without SO2) calcination conditions, Fuel 244(2019) 13-21.
 H.R. Radfarnia, M.C. Iliuta, Limestone acidification using citric acid coupled with two-step calcination for improving the CO2 sorbent activity, Ind. Eng. Chem. Res. 52(2013) 7002-7013.
 M. Hajek, F. Skopal, Treatment of glycerol phase formed by biodiesel production, Bioresour. Technol. 101(2010) 3242-3245.
 C. Chi, Y. Li, X. Ma, L. Duan, CO2 capture performance of CaO modified with byproduct of biodiesel at calcium looping conditions, Chem. Eng. J. 326(2017) 378-388.
 Y. Li, R. Sun, C. Liu, H. Liu, C. Lu, CO2 capture by carbide slag from chlor-alkali plant in calcination/carbonation cycles, Int. J. Greenh. Gas Con. 9(2012) 117-123.
 J. Sun, W. Liu, Y. Hu, J. Wu, M. Li, X. Yang, W. Wang, M. Xu, Enhanced performance of extruded-spheronized carbide slag pellets for high temperature CO2 capture, Chem. Eng. J. 285(2016) 293-303.
 Y. Yuan, Y. Li, L. Duan, H. Liu, J. Zhao, Z. Wang, CaO/Ca(OH)2 thermochemical heat storage of carbide slag from calcium looping cycles for CO2 capture, Energ. Convers. Manage. 174(2018) 8-19.
 C. Ortiz, R. Chacartegui, J.M. Valverde, A. Alovisio, J.A. Becerra, Power cycles integration in concentrated solar power plants with energy storage based on calcium looping, Energ. Convers. Manage. 149(2017) 815-829.
 V. Manovic, E.J. Anthony, Steam reactivation of spent CaO-based sorbent for multiple CO2 capture cycles, Environ. Sci. Technol. 41(2007) 1420-1425.
 H. Chen, C. Zhao, Y. Li, X. Chen, CO2 capture performance of calcium-based sorbents in a pressurized carbonation/calcination loop, Energ. Fuel. 24(2010) 5751-5756.
|||Jinglei Cui, Qian Wang, Jianming Gao, Yanxia Guo, Fangqin Cheng. The selective adsorption of rare earth elements by modified coal fly ash based SBA-15 [J]. Chinese Journal of Chemical Engineering, 2022, 47(7): 155-164.|
|||Ding-Ming Xue, Wen-Juan Zhang, Xiao-Qin Liu, Shi-Chao Qi, Lin-Bing Sun. Fabrication of azobenzene-functionalized porous polymers for selective CO2 capture [J]. Chinese Journal of Chemical Engineering, 2022, 43(3): 24-30.|
|||Xiaobin Chen, Yuting Tang, Chuncheng Ke, Chaoyue Zhang, Sichun Ding, Xiaoqian Ma. CO2 capture by double metal modified CaO-based sorbents from pyrolysis gases [J]. Chinese Journal of Chemical Engineering, 2022, 43(3): 40-49.|
|||Tongyang Zhang, Guanrun Chu, Junlin Lyu, Yongda Cao, Wentao Xu, Kui Ma, Lei Song, Hairong Yue, Bin Liang. CO2 mineralization of carbide slag for the production of light calcium carbonates [J]. Chinese Journal of Chemical Engineering, 2022, 43(3): 86-98.|
|||Wanqiao Liang, Jihuan Huang, Penny Xiao, Ranjeet Singh, Jining Guo, Leila Dehdari, Gang Kevin Li. Amine-immobilized HY zeolite for CO2 capture from hot flue gas [J]. Chinese Journal of Chemical Engineering, 2022, 43(3): 335-342.|
|||Xiuxin Yu, Bing Liu, Yuanhui Shen, Donghui Zhang. Design and experiment of high-productivity two-stage vacuum pressure swing adsorption process for carbon capturing from dry flue gas [J]. Chinese Journal of Chemical Engineering, 2022, 43(3): 378-391.|
|||Xionghui Liu, Jianfeng Du, Yu Ye, Yuchuan Liu, Shun Wang, Xianyu Meng, Xiaowei Song, Zhiqiang Liang, Wenfu Yan. Boosting selective C2H2/CH4, C2H4/CH4 and CO2/CH4 adsorption performance via 1,2,3-triazole functionalized triazine-based porous organic polymers [J]. Chinese Journal of Chemical Engineering, 2022, 42(2): 64-72.|
|||Jiajia Wang, Lizhi Wang, You Wang, Du Zhang, Qin Xiao, Jianhan Huang, You-Nian Liu. Recent progress in porous organic polymers and their application for CO2 capture [J]. Chinese Journal of Chemical Engineering, 2022, 42(2): 91-103.|
|||Peng Tan, Yao Jiang, Qiurong Wu, Chen Gu, Shichao Qi, Qiang Zhang, Xiaoqin Liu, Linbing Sun. Light-responsive adsorbents with tunable adsorbent-adsorbate interactions for selective CO2 capture [J]. Chinese Journal of Chemical Engineering, 2022, 42(2): 104-111.|
|||Baowen Wang, Zhongyuan Cai, Heyu Li, Yanchen Liang, Tao Jiang, Ning Ding, Haibo Zhao. Reaction characteristics investigation of CeO2-enhanced CaSO4 oxygen carrier with lignite [J]. Chinese Journal of Chemical Engineering, 2022, 42(2): 319-328.|
|||Chen Zhao, Yahan Ye, Xianfu Chen, Xiaowei Da, Minghui Qiu, Yiqun Fan. Charged modified tight ceramic ultrafiltration membranes for treatment of cationic dye wastewater [J]. Chinese Journal of Chemical Engineering, 2022, 41(1): 267-277.|
|||Shiyue Li, Shouying Huang, Kai Cai, Ying Li, Jing Lv, Xinbin Ma. Importance of metal location in M-H zeolite for synergistically catalyzing dimethyl ether carbonylation [J]. Chinese Journal of Chemical Engineering, 2022, 41(1): 350-357.|
|||Yu Dong, Tiantian Ping, Shufeng Shen. Solubility of CO2 in nonaqueous system of 2-(butylamino)ethanol with 2-butoxyethanol: Experimental data and model representation [J]. Chinese Journal of Chemical Engineering, 2022, 41(1): 441-448.|
|||Hang Yao, Yuwei He, Jinrong Ma, Lang Jiang, Jingan Li, Jin Wang, Nan Huang. Recent advances in cardiovascular stent for treatment of in-stent restenosis: Mechanisms and strategies [J]. Chinese Journal of Chemical Engineering, 2021, 37(9): 12-29.|
|||Wan Zhang, Yingjie Li, Yuqi Qian, Boyu Li, Jianli Zhao, Zeyan Wang. NO removal performance of CO in carbonation stage of calcium looping for CO2 capture [J]. Chinese Journal of Chemical Engineering, 2021, 37(9): 30-38.|