Mechanism analysis of solvent selectivity and energy-saving optimization in vapor recompression-assisted extractive distillation for separation of binary azeotrope

doi:10.1016/j.cjche.2021.06.010

Abstract

Abstract: Octane and p-xylene are common components in crude gasoline, so their separation process is very important in petroleum industry. The azeotrope and near azeotrope are often separated by extractive distillation in industry, which can realize the recovery and utilization of resources. In this work, the vapor–liquid equilibrium experiment was used to obtain the vapor–liquid equilibrium properties of the difficult separation system, and on this basis, the solvent extraction mechanism was studied. The mechanism of solvent separation plays a guiding role in selecting suitable solvents for industrial separation. The interaction energy, bond length and charge density distribution of p-xylene with solvent are calculated by quantum chemistry method. The quantum chemistry calculation results and experiment results showed that N-formylmorpholine is the best solvent among the alternative solvents in the work. This work provides an effective and complete solvent screening process from phase equilibrium experiments to quantum chemical calculation. An extractive distillation simulation process with N-formylmorpholine as solvent is designed to separate octane and p-xylene. In addition, the feasibility and effectiveness of the intensified vapor recompression assisted extraction distillation are also discussed. In the extractive distillation process, the vapor recompression-assisted extraction distillation process is globally optimal. Compared with basic process, the total annual cost can be reduced by 43.2%. This study provides theoretical guidance for extractive distillation separation technology and solvent selection.

Key words: Quantum chemical calculation, Vapor liquid equilibria, Distillation, Energy saving, Separation

摘要： Octane and p-xylene are common components in crude gasoline, so their separation process is very important in petroleum industry. The azeotrope and near azeotrope are often separated by extractive distillation in industry, which can realize the recovery and utilization of resources. In this work, the vapor–liquid equilibrium experiment was used to obtain the vapor–liquid equilibrium properties of the difficult separation system, and on this basis, the solvent extraction mechanism was studied. The mechanism of solvent separation plays a guiding role in selecting suitable solvents for industrial separation. The interaction energy, bond length and charge density distribution of p-xylene with solvent are calculated by quantum chemistry method. The quantum chemistry calculation results and experiment results showed that N-formylmorpholine is the best solvent among the alternative solvents in the work. This work provides an effective and complete solvent screening process from phase equilibrium experiments to quantum chemical calculation. An extractive distillation simulation process with N-formylmorpholine as solvent is designed to separate octane and p-xylene. In addition, the feasibility and effectiveness of the intensified vapor recompression assisted extraction distillation are also discussed. In the extractive distillation process, the vapor recompression-assisted extraction distillation process is globally optimal. Compared with basic process, the total annual cost can be reduced by 43.2%. This study provides theoretical guidance for extractive distillation separation technology and solvent selection.

关键词: Quantum chemical calculation, Vapor liquid equilibria, Distillation, Energy saving, Separation

Xiaomin Qiu, Yuanyuan Shen, Zhengkun Hou, Qi Wang, Zhaoyou Zhu, Yinglong Wang, Jingwei Yang, Jun Gao. Mechanism analysis of solvent selectivity and energy-saving optimization in vapor recompression-assisted extractive distillation for separation of binary azeotrope[J]. Chinese Journal of Chemical Engineering, 2022, 46(6): 271-279.

References

[1] M.A. Rodriguez, J. Ancheyta, Detailed description of kinetic and reactor modeling for naphtha catalytic reforming, Fuel 90 (2011) 3492-3508
[2] J. Liu, X. Xiao, Extractive distillation technology and its industrial application, Modem Chemical Industry 6 (2004) 14-17
[3] X. Gao, X. Geng, Application of the chemical-looping concept for azoetrope separation, Engineering 7 (2021) 84-93
[4] S. Sun, L. Lü, A. Yang, S. Wei, W. Shen, Extractive distillation:Advances in conceptual design, solvent selection, and separation strategies, Chinese J. Chem. Eng. 27 (2019) 1247-1256
[5] X. You, T. Ma, T. Qiu, Design and optimization of sustainable pressure swing distillation for minimum-boiling azeotrope separation, Ind. Eng. Chem. Res. 58 (2019) 21659-21670
[6] J. Chen, Q. Ye, T. Liu, H. Xia, X. Feng, Design and control of heterogeneous azeotropic distillation for separating 2-methylpyridine/water, Chem. Eng. Technol. 41 (2018) 2024-2033
[7] L. Zhao, X. Lyu, X. Wang, Comparison of heterogeneous azeotropic distillation and extractive distillation methods for ternary azeotrope ethanol/toluene/water separation, Comput. Chem. Eng. 100 (2017) 27-37
[8] W.L. Luyben, Comparison of extractive distillation and pressure-swing distillation for acetone-ethanol separation, Comput. Chem. Eng. 50 (2013) 1-7
[9] O.A. Deorukhkar, T.B. Rahangdale, Y.S. Mahajan, Entrainer Selection Approach for Distillation Column, International Journal of Chemical Engineering Research 8 (2016) 29-38
[10] H. Li, P. Zhou, J. Zhang, D. Li, X. Li, X. Gao, A theoretical guide for screening ionic liquid extractants applied in the separation of a binary alcohol-ester azeotrope through a DFT method, J. Mol. Liq. 251 (2018) 51-60
[11] O. Felipe, R. Gonzalo, Q. Angelica, R. Julio, P. Jaime, O. Claudia, Q. Esteban, Theoretical prediction of selectivity in solvent extraction of La(III) and Ce(III) from aqueous solutions using β-diketones as extractants and kerosene and two imidazolium-based ionic liquids as diluents via quantum chemistry and COSMO-RS calculations, J. Mol. Liq. 325 (2021) 114655
[12] H. Li, G. Sun, D. Li, L. Xi, P. Zhou, X. Li, J. Zhang, X. Gao, Molecular interaction mechanism in the separation of a binary azeotropic system by extractive distillation with ionic liquid, Green energy environ. 2020
[13] L. Li, L. Guo, Y. Tu, N. Yu, L. Sun, L. Tian, Q. Li, Comparison of different extractive distillation processes for 2-methoxyethanol/toluene separation:Design and control, Comput. Chem. Eng. 99 (2017) 117-134
[14] X. You, J. Gu, C. Peng, I. Rodriguez-Donis, H. Liu, Optimal design of extractive distillation for acetic acid dehydration with N-methyl acetamide, Chem. Eng. Process. 120 (2017) 301-316
[15] L. Sun, X. Chang, T. Tan, Application of thermal coupling technology in azeotropic distillation system, Progress in chemical industry 29 (2010) 2228-2233
[16] H. Cao, H. Wang, C. Li, Heat integrated extractive distillation of methyl acetate methanol water, Progress in chemical industry 4 (2017) 148-151
[17] D.M. Van de Bor, C.A.I. Infante Ferreira, Quick selection of industrial heat pump types including the impact of thermodynamic losses, Energy 53 (2013) 312-322
[18] G. Modla, P. Lang, Comparison of Extractive and Pressure-Swing Batch Distillation for Acetone-Methanol Separation, Computer Aided Chemical Engineering 29 (2011) 382-386
[19] A.K. Jana, Heat integrated distillation operation, Appl. Energ. 87 (2010) 1477-1494
[20] T. Shi, W. Chun, A. Yang, S. Jin, W. Shen, J. Ren, J. Gu, The process control of the triple-column pressure-swing extractive distillation with partial heat integration, Sep. Purif. Technol. 1238 (2020) 116416
[21] S. Sun, A. Yang, I. Chien, W. Shen, S. Wei, J. Ren, X. Zhang, Intensifification and performance assessment for synthesis of 2-methoxy-2-methyl-heptane through the combined use of different pressure thermally coupled reactive distillation and heat integration technique, Chem. Eng. Process. 142 (2019) 107561
[22] H. Luo, C.S. Bildea, A.A. Kiss, Novel heat-pump-assisted extractive distillation for bioethanol purification, Ind. Eng. Chem. Res. 54 (2015) 2208-2213
[23] K.A. Kobe, Elements of fractional distillation, J. Chem. Educ. 28 (1951) 231-232
[24] C. Zheng, S. Song, Y. Mu, Research Progress on application forms of heat pump distillation, Modern Chemical Industry 28 (2008) 114-117
[25] P. Shi, Q. Zhang, A. Zeng, Y. Ma, X. Yuan, Eco-efficient vapor recompression-assisted pressure-swing distillation process for the separation of a maximum-boiling azeotrope, Energy 196 (2020) 117095
[26] L. Zhao, X. Lyu, W. Wang, J. Shan, T. Qiu, Comparison of heterogeneous azeotropic distillation and extractive distillation methods for ternary azeotrope ethanol/toluene/water separation, Comput. Chem. Eng. 100 (2017) 27-37
[27] M. Li, Y. Cui, X. Shi, Z. Zhang, X. Zhao, X. Zhu, J. Gao, Simulated annealing-based optimal design of energy efficient ternary extractive dividing wall distillation process for separating benzene-isopropanol-water mixtures, Chinese J. Chem. Eng. (5) (2021) 203-210
[28] Z. Xing, Y. Gao, H. Ding, X. Wang, L. Li, H. Zhou, Isobaric vapor-liquid equilibrium for ternary system of ethanol, ethyl propionate and para-xylene at 101.3 kPa, Chinese J. Chem. Eng. 26 (2018) 560-565
[29] H. Jia, H. Wang, K. Ma, M. Yu, Z. Zhu, Y. Wang, Effect of thermodynamic parameters on prediction of phase behavior and process design of extractive distillation, Chinese J. Chem. Eng. 26 (2018) 993-1002
[30] H.C. Van Ness, S.M. Byer, R.E. Gibbs, Vapor-Liquid equilibrium:Part I. An appraisal of data reduction methods, Aiche J. 19 (1973) 238-244
[31] H. Renon, J.M. Prausnitz, Local compositions in thermodynamic excess functions for liquid mixtures, Aiche J. 14 (1968) 135-144
[32] Y. Liu, Y. Wang, W.F. Cai, Salting Effect of Sodium Hydroxide and Sodium Formate on the Liquid-Liquid Equilibrium of Polyoxymethylene Dimethyl Ethers in Aqueous Solution, J. Chem. Eng. Data. 64 (2019) 2578-2592
[33] X. Li, X. Zhang, L. Meng, S. Zheng, Y. Zeng, Quantum chemistry study on the interaction between serine and water, Journal of Hebei Normal University (Natural Science edition) 34 (2010) 696-701
[34] Y. Shen, Z. Chen, H. Qi, Z. Ma, Y. Dai, Q, Zhao, Z. Zhu, Y. Ma, Y. Wang, Mechanism analysis of extractive distillation for separation of acetic acid and water based on quantum chemical calculation and molecular dynamics simulation, J. Mol. Liq. 332 (2021) 115866
[35] M.J.G. Revision Frisch, G.W. Trucks, H.B. Schlegel, Gaussian, Inc., Wallingford CT, 2004.
[36] M.J. Frisch, G.W. Trucks, H.B. Schlegel, G.E. Scuseria, M.A. Robb, J.R. Cheeseman, G. Scalmani, B. Barone Mennucci, Gaussian 09, Inc., Wallingford CT, 2009.
[37] H. Zhang, Y. Liu, X. Yu, X. Qiu, Y. Shen, J. Yang, P. Cui, Y. Wang, J. Gao, Application of green solvent to separate the minimum boiling point azeotrope based on molecular structure prediction and experimental verification, Sep. Purif. Technol. 240 (2020) 1383-5866
[38] Y. Xu, D. Meng, H. Li, X. Yu, Z. Zhu, Y. Wang, Y. Ma, J. Gao, Mechanism analysis for separation of cyclohexane and tert-Butanol system via ionic liquids as extractants and process optimization, ACS Sustain Chem. Eng. 7 (2019) 19984-19992
[39] A. Yang, H. Zou, I. Chien, D. Wang, S. Wei, J. Ren, Z. Ren, W. Shen, Optimal Design and Effective Control of Triple-Column Extractive Distillation for Separating Ethyl Acetate/Ethanol/Water with Multiazeotrope, Ind. Eng. Chem. Res. 58 (2019) 7265-7283
[40] J.M. Douglas, Conceptual Design of Chemical Processes, McGraw-Hill, New York 1988
[41] X. Huang, S. Xia, P. Ma, S. Song, B. Ma, Vapor-Liquid Equilibrium of N-Formylmorpholine with Toluene and Xylene at 101.33 kPa, J. Chem. Eng. Data, 53 (2008) 252-255
[42] Q. Zhang, M. Liu, C. Li, A. Zeng, Heat-integrated pressure-swing distillation process for separation of the maximum-boiling azeotrope diethylamine and methanol, J. Taiwan Inst. Chem. E. 93 (2018) 644-659
[43] Q. Zhang, M. Liu, C. Li, A. Zeng, Design and control of extractive distillation process for separation of the minimum-boiling azeotrope ethyl-acetate and ethanol, Chem. Eng. Res. Des. 136 (2018b) 57-70
[44] V. Plesu, A.E.B. Ruiz, J. Bonet, J. Llorens, Simple equation for suitability of heat pump use in distillation, Comput. Aided Chem. Eng. 33 (2014) 1327-1332