SCI和EI收录∣中国化工学会会刊

Chinese Journal of Chemical Engineering ›› 2014, Vol. 22 ›› Issue (6): 721-729.DOI: 10.1016/S1004-9541(14)60080-X

• 催化、动力学与反应工程 • 上一篇    下一篇

Photochemical Process Modeling and Analysis of Ozone Generation

王冰, 邱彤, 陈丙珍   

  1. Department of Chemical Engineering, Tsinghua University, Beijing 100084, China
  • 收稿日期:2013-08-15 修回日期:2013-10-22 出版日期:2014-06-28 发布日期:2014-06-06
  • 通讯作者: CHEN Bingzhen

Photochemical Process Modeling and Analysis of Ozone Generation

WANG Bing, QIU Tong, CHEN Bingzhen   

  1. Department of Chemical Engineering, Tsinghua University, Beijing 100084, China
  • Received:2013-08-15 Revised:2013-10-22 Online:2014-06-28 Published:2014-06-06

摘要: Air pollution in modern city and industrial zones has become a serious public concern in recent years in China. Significance of air quality assessment and emission control strategy design is increasing. Most studies in China focus on particulate matter (PM), especially PM2.5, while few account for photochemical secondary air pollutions represented by ozone (O3). In this paper, a procedure for air quality simulation with comprehensive air quality model with extensions (CAMx) is demonstrated for studying the photochemical process and ozone generation in the troposphere. As a case study, the CAMx photochemical grid model is used to model ozone over southern part of Beijing city in winter, 2011. The input parameters to CAMx include emission sources, meteorology field data, terrain definition, photolysis status, initial and boundary conditions. The simulation results are verified by theoretical analysis of the ozone generation tendency. The simulated variation tendency of domain-wide average value of hourly ozone concentration coincides reasonably well with the theoretical analysis on the atmospheric photochemical process, demonstrating the effectiveness of the procedure. An integrated model system that cooperates with CAMx will be established in our future work.

关键词: comprehensive air quality model with extensions, multi-scale, ozone, air quality modeling, photochemical

Abstract: Air pollution in modern city and industrial zones has become a serious public concern in recent years in China. Significance of air quality assessment and emission control strategy design is increasing. Most studies in China focus on particulate matter (PM), especially PM2.5, while few account for photochemical secondary air pollutions represented by ozone (O3). In this paper, a procedure for air quality simulation with comprehensive air quality model with extensions (CAMx) is demonstrated for studying the photochemical process and ozone generation in the troposphere. As a case study, the CAMx photochemical grid model is used to model ozone over southern part of Beijing city in winter, 2011. The input parameters to CAMx include emission sources, meteorology field data, terrain definition, photolysis status, initial and boundary conditions. The simulation results are verified by theoretical analysis of the ozone generation tendency. The simulated variation tendency of domain-wide average value of hourly ozone concentration coincides reasonably well with the theoretical analysis on the atmospheric photochemical process, demonstrating the effectiveness of the procedure. An integrated model system that cooperates with CAMx will be established in our future work.

Key words: comprehensive air quality model with extensions, multi-scale, ozone, air quality modeling, photochemical