[1] D.C. Freshwater, Thermal economy in distillation, Trans. Inst. Chem. Eng. 29 (1951) 149-160. [2] D.A. Beneke, S.B. Kim, A.A. Linninger, Pinch point calculations and its implications on robust distillation design, Chin. J. Chem. Eng. 19 (2011) 911-925. [3] R.S.H. Mah, J.J. Nicholas, R.B. Wodnik, Distillation with secondary reflux and vaporization: a comparative evaluation, AICHE J. 23 (1977) 651-657. [4] Y.M. Wang, P.J. Yao, Simulation and optimization for thermally coupled distillation using artificial neural network and genetic algorithm, Chin. J. Chem. Eng. 11 (3) (2003) 307-311. [5] R. Agrawal, Z.T. Fidkowski, New thermally coupled schemes for ternary distillation, AICHE J. 45 (3) (1999) 485-496. [6] Z. Olujic, L. Sun, A. de Rijke, P.J. Jansens, Conceptual design of an internally heat integrated propylene-propane splitter, Energy 31 (2006) 3083-3096. [7] M. Nakaiwa, K. Huang, A. Endo, T. Ohmori, T. Akiya, T. Takamatsu, Internally heat-integrated distillation columns: a review, Trans. Inst. Chem. Eng. 81 (2003) 162-177. [8] A. de Rijke, Development of a Concentric Internally Heat Integrated Distillation Column, (Ph.D. Thesis) Technology University of Delft, Netherlands, 2007. [9] T. Nakanishi, T. Takamatsu,M. Nakaiwa, K. Aso, H. Noda, N. Kuratani, A case study of HIDiC design and energy saving, Comput. Chem. Eng. Symp. Ser. 23 (1999) 855-858. [10] K. Naito, M. Nakaiwa, K. Huang, A. Endo, K. Aso, T. Nakanishi, T. Nakamura, H. Noda, T. Takamatsu, Operation of a bench-scale ideal heat integrated distillation column (HIDiC): an experimental study, Comp. Chem. Eng. 24 (2000) 495-499. [11] K. Horiuchi, K. Yanagimoto, K. Kataoka,M. Nakaiwa, Energy-saving characteristics of heat integrated distillation column technology applied to multi-component petroleum, IChemE Symp. Ser. 152 (2006) 172-180. [12] M. Gadalla, L. Jimenez, Z. Olujic, P.J. Jansens, A thermo-hydraulic approach to conceptual design of an internally heat-integrated distillation column (i-HIDiC), Comput. Chem. Eng. 31 (2007) 1346-1354. [13] A. de Rijke, W. Tesselaer, M. Gadalla, Z. Olujic, P.J. Jansens, Heat and mass transfer characteristics of an annular sieve tray, IChemE Symp. Ser. 112 (2006) 181-189. [14] M. Gadalla, Internal heat integrated distillation columns (iHIDiCs)— new systematic design methodology, Chem. Eng. Res. Des. 87 (2009) 1658-1666. [15] B. Suphanit, Design of internally heat-integrated distillation column (HIDiC): uniform heat transfer area versus uniform heat distribution, Energy 35 (2010) 1505-1514. [16] P. Bai, S.A. Song, M. Sheng, X.F. Li, A dynamic modeling for cyclic total reflux batch distillation, Chin. J. Chem. Eng. 18 (2010) 554-561. [17] V. Lueprasitakul, S. Hasebe, I. Hashimoto, T. Takamatsu, Study of energy efficiency of a wetted-wall distillation column with internal heat integration, J. Chem. Eng. Jpn 23 (5) (1990) 580-587. [18] T. Nakanishi, N. Adachi, N. Nishida, K. Iwakabe, K. Horiuchi, M. Nakaiwa, Basic design of a double-pipe unit type internally heat integrated distillation column (HIDiC), Annual AIChE Meeting, Philadelphia, 2008, pp. 16-21. [19] H. Noda, T. Mukaida, M. Kaneda, K. Kataoka, M. Nakaiwa, Internal column-tocolumn heat transfer characteristics for energy-saving distillation system, IChemE Symp. Ser. 152 (2006) 737-744. [20] K.K. Kataoka, H.N. Noda, H.Y. Yamaji, T. Mukaida, M. Kaneda, A compressor-free HIDiC system for recovery of waste solvent mixtures, 8th World Congress of Chemical Engineering, Montreal, 2009, (paper 512a). |