[1] X. Li, X. Pan, L. Yu, P. Ren, X. Wu, L. Sun, F. Jiao, X. Bao, Silicon carbide-derived carbon nanocomposite as a substitute for mercury in the catalytic hydrochlorination of acetylene, Nat. Commun. 5(2014) 3688.[2] L. Zhi, Y. Li, H. Tang, H. Liu, W. Pei, Deactivation mechanism of low-mercury catalyst for acetylene hydrochlorination, Chem. React. Eng. Technol. 31(2015) 343-351(in Chinese).[3] T. Yu, D. Lu, J. Fu, Content analysis of mercurous chloride in low mercury catalysts, Ind. Catal. 23(2015) 219-221(in Chinese).[4] G.J. Hutchings, Vapor phase hydrochlorination of acetylene:correlation of catalytic activity of supported metal chloride catalysts, J. Catal. 96(1985) 292-295.[5] N.A. Prokudina, V.V. Chesnokov, B.P. Zolotolvskii, L.N. Yelesina, V.G. Yenakaeva, V.F. Tarasov, Stud. Surf. Sci. Catal. 75(1993) 2451-2454.[6] Chinese Ministry of Industry and Information Technology, The report about the integrated prevention and treatment scheme for mercury pollution from PVC production industry using calcium carbide method, https://www.miit.gov.cn/n1146295/n1146592/n1146754/n1235000/n1235031/n1235032/n1235034/c3165244/content.html2017(accessed 18.01.17).[7] Q.L. Song, S.J. Wang, B.X. Shen, J.G. Zhao, Palladium-based catalysts for the hydrochlorination of acetylene:reasons for deactivation and its regeneration, Pet. Sci. Technol. 28(2010) 1825-1833.[8] B. Dai, Q. Wang, F. Yu, M. Zhu, Effect of Au nano-particle aggregation on the deactivation of the AuCl3/AC catalyst for acetylene hydrochlorination, Sci Rep 5(2015) 10553.[9] Chinese National Standard, Low-level mercury catalyst for chloroethylene synthesis, 2015(GB/T 31530-2015).[10] C. Liu, J.H. Peng, A.Y. Ma, L.B. Zhang, J. Li, Study on non-isothermal kinetics of the thermal desorption of mercury from spent mercuric chloride catalyst, J. Hazard. Mater. 322(2017) 325-333.[11] M. Bentley, M. Fan, B. Dutcher, M. Tang, M.D. Argyle, A.G. Russell, Y. Zhang, M.P. Sharma, S.M. Swapp, Catalytic regeneration of mercury sorbents, J. Hazard. Mater. 262(2013) 642-648.[12] X. Xu, J. Zhao, C. Lu, T. Zhang, X. Di, S. Gu, X. Li, Improvement of the stability of Hg/AC catalysts by CsCl for the high-temperature hydrochlorination of acetylene, Chin. Chem. Lett. 27(2016) 822-826.[13] J.W. Anthony, R.A. Bideaux, K.W. Bladh, M.C. Nichols, Handbook of Mineralogy, Mineral Data Publishing, Tucson, 1990.[14] V.N. Selivanov, G.M. Plavnik, E.D. Glazunova, I.I. Kurlyandskaya, V.I. Yakerson, X-ray study of the dispersion and pore structure of the HgCl2-active carbon catalytic system, Russ. Chem. Bull. 38(1989) 2222-2226.[15] Y.C. Xie, Y.Q. Tang, Spontaneous monolayer dispersion of oxides and salts onto surfaces of supports:applications to heterogeneous catalysis, Adv. Catal. 37(1990) 1-43.[16] Y.C. Xie, N.F. Yang, Y.J. Liu, Y.Q. Tang, Spontaneous dispersion of some active components onto the surfaces of carriers, Sci. China B 26(1983) 337-350.[17] S. Tong, M. Fan, L. Mao, C.Q. Jia, Sequential extraction study of stability of adsorbed mercury in chemically modified activated carbons, Environ. Sci. Technol. 45(2011) 7416-7421.[18] Z. Xue, Mercury Pollution Control of PVC Production by Calcium Carbide Method, China Chlor-Alkali, 2011, 25-31(in Chinese).[19] D. Lu, Study on Deactivation of the Mercuric Chloride Catalyst(Academic dissertation) Beijing Institute of Clothing Technology, 2015(in Chinese).[20] V. Gomez-Serrano, F. Piriz-Almeida, C.J. Duran-Valle, J. Pastor-Villegas, Formation of oxygen structures by air activation. A study by FT-IR spectroscopy, Carbon 37(1999) 1517-1528.[21] N. Muhammad, S. Maitra, I. Ul Haq, M. Farooq, Some studies on the wear resistance of artificial teeth in presence of amorphous SiO2 and TiO2 fillers, Ceramica 57(2011) 324-328.[22] S. Hirose, T. Hatakeyama, Y. Izuta, H. Hatakeyama, TG-FTIR studies on lignin-based polycaprolactones, J. Therm. Anal. Calorim. 70(2002) 853-860.[23] P.J. Pan, Z.C. Liang, B. Zhu, T. Dong, Y. Inoue, Blending effects on polymorphic crystallization of poly(L-lactide), Macromolecules 42(2009) 3374-3380.[24] B. Pawelec, R. Mariscal, R.M. Navarro, S. van Bokhorst, S. Rojas, J.L.G. Fierro, Hydrogenation of aromatics over supported Pt-Pd catalysts, Appl. Catal. A Gen. 225(2002) 223-237.[25] D.T. Allen, E.J. Palen, M.I. Haimov, S.V. Hering, J.R. Young, Fourier transform infrared spectroscopy of aerosol collected in a low pressure impactor (LPI/FTIR):Method development and field calibration, Aerosol Sci. Technol. 21(1994) 325-342.[26] X. Tan, M. Fang, C. Chen, S. Yu, X. Wang, Counterion effects of nickel and sodium dodecylbenzene sulfonate adsorption to multiwalled carbon nanotubes in aqueous solution, Carbon 46(2008) 1741-1750.[27] G.M. Veith, L. Baggetto, L.A. Adamczyk, B. Guo, S.S. Brown, X.G. Sun, A.A. Albert, J.R. Humble, C.E. Barnes, M.J. Bojdys, S. Dai, N.J. Dudney, Electrochemical and solid-state lithiation of graphitic C3N4, Chem. Mater. 25(2013) 503-508.[28] J.Y. Cheon, J.H. Kim, J.H. Kim, K.C. Goddeti, J.Y. Park, S.H. Joo, Intrinsic relationship between enhanced oxygen reduction reaction activity and nanoscale work function of doped carbons, J. Am. Chem. Soc. 136(2014) 8875-8878.[29] T. He, Z. Yang, R. Chen, J. Wang, Y. Leng, H. Sun, N. Huang, Enhanced endothelialization guided by fibronectin functionalized plasma polymerized acrylic acid film, Mater. Sci. Eng. C 32(2012) 1025-1031.[30] H. Wang, J. Huang, K. Zhang, Y. Yu, K. Liu, G. Yu, S. Deng, B. Wang, Effects of zerovalent metals together with quartz sand on the mechanochemical destruction of dechlorane plus coground in a planetary ball mill, J. Hazard. Mater. 264(2014) 230-235.[31] D. Zhao, G. Sheng, C. Chen, X. Wang, Enhanced photocatalytic degradation of methylene blue under visible irradiation on graphene@TiO2 dyade structure, Appl. Catal. B Environ. 111-112(2012) 303-308.[32] Y.C. Chiang, C.Y. Lee, H.C. Lee, Surface chemistry of polyacrylonitrile-and rayonbased activated carbon fibers after post-heat treatment, Mater. Chem. Phys. 101(2007) 199-210.[33] A.V. Naumkin, A. Kraut-Vass, S.W. Gaarenstroom, C.J. Powell, NIST X-ray photoelectron spectroscopy database-NIST standard reference database 20, version 4.1. 2017(accessed 18.01.17), https://srdata.nist.gov/xps/XPSDetailPage.aspx?AllDataNo=22136.[34] A.V. Naumkin, A. Kraut-Vass, S.W. Gaarenstroom, C.J. Powell, NIST X-ray photoelectron spectroscopy database-NIST standard reference database 20, version 4.1. 2017(accessed 18.01.17), https://srdata.nist.gov/xps/XPSDetailPage.aspx?AllDataNo=22099.[35] A. Swiatkowski, M. Pakula, S. Biniak, M. Walczyk, Influence of the surface chemistry of modified activated carbon on its electrochemical behaviour in the presence of lead(Ⅱ) ions, Carbon 42(2004) 3057-3069.[36] A.M. Puziy, O.I. Poddubnaya, R.P. Socha, J. Gurgul, M. Wisniewski, XPS and NMR studies of phosphoric acid activated carbons, Carbon 46(2008) 2113-2123.[37] P. Burg, P. Fydrych, D. Cagniant, G. Nanse, J. Bimer, A. Jankowska, The characterization of nitrogen-enriched activated carbons by IR, XPS and LSER methods, Carbon 40(2002) 1521-1531.[38] N. Tsubouchi, N. Ohtaka, Y. Ohtsuka, Reactions of hydrogen chloride with carbonaceous materials and the formation of surface chlorine species, Energy Fuel 30(2016) 2320-2327.[39] A.V. Naumkin, A. Kraut-Vass, S.W. Gaarenstroom, C.J. Powell, NIST X-ray photoelectron spectroscopy database-NIST standard reference database 20, version 4.1. 2017(accessed 18.01.17), https://srdata.nist.gov/xps/XPSDetailPage.aspx?AllDataNo=24132.[40] Z. Tan, L. Sun, J. Xiang, H. Zeng, Z. Liu, S. Hu, J. Qiu, Gas-phase elemental mercury removal by novel carbon-based sorbents, Carbon 50(2012) 362-371.[41] J. Wang, B.L. Deng, H. Chen, X.R. Wang, J.Z. Zheng, Removal of aqueous Hg(Ⅱ) by polyaniline:sorption characteristics and mechanisms, Environ. Sci. Technol. 43(2009) 5223-5228.[42] J.J. Mahle, G.W. Peterson, B.J. Schindler, P.B. Smith, J.A. Rossin, G.W. Wagner, Role of TEDA as an activated carbon impregnant for the removal of cyanogen chloride from air streams:Synergistic effect with Cu(Ⅱ), J. Phys. Chem. C 114(2010) 20083-20090.[43] A.V. Naumkin, A. Kraut-Vass, S.W. Gaarenstroom, C.J. Powell, NIST X-ray photoelectron spectroscopy database-NIST standard reference database 20, version 4.1. 2017(accessed 18.01.17), https://srdata.nist.gov/xps/EngElmSrchQuery.aspx?EType=PE&CSOpt=Retri_ex_dat&Elm=Hg.[44] E. Sasmaz, A. Kirchofer, A.D. Jew, A. Saha, D. Abram, T.F. Jaramillo, J. Wilcox, Mercury chemistry on brominated activated carbon, Fuel 99(2012) 188-196.[45] R.S. Vieira, M.L.M. Oliveira, E. Guibal, E. Rodriguez-Castellon, M.M. Beppu, Copper, mercury and chromium adsorption on natural and crosslinked chitosan films:An XPS investigation of mechanism, Colloids Surf. A Physicochem. Eng. Asp. 374(2011) 108-114.[46] K.C. Chiang, T.E. Hsieh, Characteristics of AgInSbTe-SiO2 nanocomposite thin film applied to nonvolatile floating gate memory devices, Nanotechnology 21(2010) 425204.[47] A.V. Naumkin, A. Kraut-Vass, S.W. Gaarenstroom, C.J. Powell, NIST X-ray photoelectron spectroscopy database-NIST standard reference database 20, version 4.1. 2017(accessed 18.01.17), https://srdata.nist.gov/xps/XPSDetailPage.aspx?AllDataNo=24845.[48] H. Wang, J. Fang, T. Cheng, J. Ding, L. Qu, L. Dai, X. Wang, T. Lin, One-step coating of fluoro-containing silica nanoparticles for universal generation of surface superhydrophobicity, Chem. Commun. (Camb.) (2008) 877-879.[49] S. Hassan, M.S. Yusof, Z. Embong, M.I. Maksud, Angle resolved X-ray photoelectron spectroscopy (ARXPS) analysis of lanthanum oxide for micro-flexography printing, AIP Conf. Proc. 1704(2016), 040002.[50] S. Tao, C. Li, X. Fan, G. Zeng, P. Lu, X. Zhang, Q. Wen, W. Zhao, D. Luo, C. Fan, Activated coke impregnated with cerium chloride used for elemental mercury removal from simulated flue gas, Chem. Eng. J. 210(2012) 547-556.[51] H. Piao, K. Adib, Z. Chang, J. Hrbek, M. Enever, M.A. Barteau, Multistep reaction processes in epoxide formation from 1-chloro-2-methyl-2-propanol on Ag(110) revealed by TPXPS and TPD experiments, J. Phys. Chem. B 107(2003) 13976-13985.[52] E. Liu, B. Sarkar, Z. Chen, R. Naidu, Decontamination of chlorine gas by organic amine modified copper-exchanged zeolite, Microporous Mesoporous Mater. 225(2016) 450-455.[53] M.S. Cong, H. Jiang, J.Z. Gui, Y.F. Ren, L.J. Song, Improvements on the mercuric chloride catalysts used for the synthesis of vinyl chloride from acetylene, Polyvinyl Chloride (2007) 25-27(in Chinese).[54] P. Behra, P. Bonnissel-Gissinger, M. Alnot, R. Revel, J.J. Ehrhardt, XPS and XAS study of the sorption of Hg(Ⅱ) onto pyrite, Langmuir 17(2001) 3970-3979.[55] N.D. Hutson, B.C. Attwood, K.G. Scheckel, XAS and XPS characterization of mercury binding on brominated activated carbon, Environ. Sci. Technol. 41(2007) 1747-1752.[56] S.J. Gregg, K.S.W. Sing, Adsorption, Surface Area and Porosity, 2nd ed. Academic Press, London, 1982, 56-86.[57] C.G. Sonwane, S.K. Bhatia, Characterization of pore size distributions of mesoporous materials from adsorption isotherms, J. Phys. Chem. B 104(2000) 9099-9110. |