SCI和EI收录∣中国化工学会会刊

Chinese Journal of Chemical Engineering ›› 2018, Vol. 26 ›› Issue (5): 1192-1199.DOI: 10.1016/j.cjche.2017.11.008

• Energy, Resources and Environmental Technology • 上一篇    下一篇

Cr(Ⅲ) removal from simulated solution using hydrous magnesium oxide coated fly ash: Optimization by response surface methodology (RSM)

Min Xia1, Chunsong Ye1, Kewu Pi2, Defu Liu2, Andrea R. Gerson3   

  1. 1 School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072, Hubei, China;
    2 School of Resource and Environmental Engineering, Hubei University of Technology, Wuhan 430068, Hubei, China;
    3 Blue Minerals Consultancy, Wattle Grove, Tasmania 7109, Australia
  • 收稿日期:2017-09-25 修回日期:2017-11-19 出版日期:2018-05-28 发布日期:2018-06-29
  • 通讯作者: Min Xia,E-mail address:2015102080025@whu.edu.cn
  • 基金资助:

    Supported by the State Key Development Program for Basic Research of China (2014CB460601) and the International S&T Cooperation Program of China (2014DFE70070).

Cr(Ⅲ) removal from simulated solution using hydrous magnesium oxide coated fly ash: Optimization by response surface methodology (RSM)

Min Xia1, Chunsong Ye1, Kewu Pi2, Defu Liu2, Andrea R. Gerson3   

  1. 1 School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072, Hubei, China;
    2 School of Resource and Environmental Engineering, Hubei University of Technology, Wuhan 430068, Hubei, China;
    3 Blue Minerals Consultancy, Wattle Grove, Tasmania 7109, Australia
  • Received:2017-09-25 Revised:2017-11-19 Online:2018-05-28 Published:2018-06-29
  • Contact: Min Xia,E-mail address:2015102080025@whu.edu.cn
  • Supported by:

    Supported by the State Key Development Program for Basic Research of China (2014CB460601) and the International S&T Cooperation Program of China (2014DFE70070).

摘要: Hydrous magnesium oxide coated fly ash (MFA) has environmental remediation potential by providing a substrate for the adsorption of aqueous Cr(Ⅲ). Aqueous Cr(Ⅲ) adsorption onto MFA was examined as a function of MFA dosage, pH and initial Cr(Ⅲ) concentration with the Box-Behnken approach used for experimental design and optimization using response surface methodology (RSM). pH and dosage (dosage and concentration) have significant interactive effects on Cr(Ⅲ) adsorption efficiency. Analysis of variance shows that the response surface quadratic model is highly significant and can effectively predict the experimental outcomes. Cr(Ⅲ) removal efficiency of 98% was obtained using optimized conditions of MFA dosage, pH and initial Cr(Ⅲ) concentration of 1.57 g·L-1, 4.11 and 126 mg·L-1, respectively. Cr(Ⅲ) adsorption onto MFA is mainly attributed to the interaction between Cr(Ⅲ) and the functional group —OH of the hydrous magnesium oxide, in all probability caused by chemisorptions. The results of this study can conduce to reveal the interactions between Cr(Ⅲ) pollutant and MFA characteristics, posing important implications for the cost-effective alternative adsorption technology in the treatment of heavy metal containing wastewater.

关键词: Hydrous magnesium oxide, Fly ash, Cr (III) removal, Optimization, Response surface methodology (RSM)

Abstract: Hydrous magnesium oxide coated fly ash (MFA) has environmental remediation potential by providing a substrate for the adsorption of aqueous Cr(Ⅲ). Aqueous Cr(Ⅲ) adsorption onto MFA was examined as a function of MFA dosage, pH and initial Cr(Ⅲ) concentration with the Box-Behnken approach used for experimental design and optimization using response surface methodology (RSM). pH and dosage (dosage and concentration) have significant interactive effects on Cr(Ⅲ) adsorption efficiency. Analysis of variance shows that the response surface quadratic model is highly significant and can effectively predict the experimental outcomes. Cr(Ⅲ) removal efficiency of 98% was obtained using optimized conditions of MFA dosage, pH and initial Cr(Ⅲ) concentration of 1.57 g·L-1, 4.11 and 126 mg·L-1, respectively. Cr(Ⅲ) adsorption onto MFA is mainly attributed to the interaction between Cr(Ⅲ) and the functional group —OH of the hydrous magnesium oxide, in all probability caused by chemisorptions. The results of this study can conduce to reveal the interactions between Cr(Ⅲ) pollutant and MFA characteristics, posing important implications for the cost-effective alternative adsorption technology in the treatment of heavy metal containing wastewater.

Key words: Hydrous magnesium oxide, Fly ash, Cr (III) removal, Optimization, Response surface methodology (RSM)