Non-phosgene synthesis of hexamethylene-1,6-diisocyanate from thermal decomposition of hexamethylene-1,6-dicarbamate over Zn–Co bimetallic supported ZSM-5 catalyst

doi:10.1016/j.cjche.2018.05.001

中国化学工程学报 ›› 2019, Vol. 27 ›› Issue (3): 549-555.DOI: 10.1016/j.cjche.2018.05.001

• Catalysis, Kinetics and Reaction Engineering • 上一篇下一篇

Non-phosgene synthesis of hexamethylene-1,6-diisocyanate from thermal decomposition of hexamethylene-1,6-dicarbamate over Zn–Co bimetallic supported ZSM-5 catalyst

Yan Cao^1,2, Yafang Chi^1,2, Ammar Muhammad^1,2, Peng He^1,2, liguo Wang^1,2,3, Huiquan Li^1,2,3

1 CAS Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China;
2 National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China;
3 University of Chinese Academy of Sciences, Beijing 100049, China

收稿日期:2018-01-25 修回日期:2018-04-27 出版日期:2019-03-28 发布日期:2019-04-25
通讯作者: Yan Cao,E-mail address:ycao@ipe.ac.cn
基金资助:
Supported by the National Natural Science Foundation of China (21476244,21406245),Transformational Technologies for Clean Energy and Demonstration,Strategic Priority Research Program of the Chinese Academy of Sciences,(XDA 21030600),and the Youth Innovation Promotion Association CAS (2016046).

Non-phosgene synthesis of hexamethylene-1,6-diisocyanate from thermal decomposition of hexamethylene-1,6-dicarbamate over Zn–Co bimetallic supported ZSM-5 catalyst

Yan Cao^1,2, Yafang Chi^1,2, Ammar Muhammad^1,2, Peng He^1,2, liguo Wang^1,2,3, Huiquan Li^1,2,3

1 CAS Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China;
2 National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China;
3 University of Chinese Academy of Sciences, Beijing 100049, China

Received:2018-01-25 Revised:2018-04-27 Online:2019-03-28 Published:2019-04-25
Contact: Yan Cao,E-mail address:ycao@ipe.ac.cn
Supported by:
Supported by the National Natural Science Foundation of China (21476244,21406245),Transformational Technologies for Clean Energy and Demonstration,Strategic Priority Research Program of the Chinese Academy of Sciences,(XDA 21030600),and the Youth Innovation Promotion Association CAS (2016046).

摘要/Abstract

摘要： A non-phosgene route for the synthesis of hexamethylene-1,6-diisocyanate (HDI) was developed via catalytic decomposition of hexamethylene-1,6-dicarbamate (HDC) over Zn-Co bi-metallic supported ZSM-5 catalyst. The catalyst was characterized by FTIR and XRD analyses. Three solvents dioctyl sebacate (DOS), dibutyl sebacate (DBS) and 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF₄) were investigated and compared; DOS gave better performance. The catalytic performances for thermal decomposition of HDC to HDI using DOS as solvent were then investigated, and the results showed that, under the optimized reaction conditions, i.e.,10 wt% concentration of HDC in DOS, 250℃ temperature, 60 min reaction time, 83.8% yield of HDI had been achieved over Zn-Co/ZSM-5. Decomposition of the intermediate hexamethylene-1-carbamate-6-isocyanate (HMI) over Zn-Co/ZSM-5 in DOS solvent was further studied and the results indicated that yield of HDI from HMI reached to 69.6% (98.6% HDI selectively) at 270℃, which further increased the yield of the total HDI (HDI_tol) to as high as 95.0%. Recycling of catalyst showed that HDI and HMI yield slightly decreased, and by-product yield increased after the catalyst was reused for 4 times. At last possible reaction mechanism was proposed.

关键词: Non-phosgene, Thermal decomposition, Hexamethylene-1,6-diisocyanate, Hexamethylene-1,6-dicarbamate, Bimetallic supported ZSM-5 catalyst

Abstract: A non-phosgene route for the synthesis of hexamethylene-1,6-diisocyanate (HDI) was developed via catalytic decomposition of hexamethylene-1,6-dicarbamate (HDC) over Zn-Co bi-metallic supported ZSM-5 catalyst. The catalyst was characterized by FTIR and XRD analyses. Three solvents dioctyl sebacate (DOS), dibutyl sebacate (DBS) and 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF₄) were investigated and compared; DOS gave better performance. The catalytic performances for thermal decomposition of HDC to HDI using DOS as solvent were then investigated, and the results showed that, under the optimized reaction conditions, i.e.,10 wt% concentration of HDC in DOS, 250℃ temperature, 60 min reaction time, 83.8% yield of HDI had been achieved over Zn-Co/ZSM-5. Decomposition of the intermediate hexamethylene-1-carbamate-6-isocyanate (HMI) over Zn-Co/ZSM-5 in DOS solvent was further studied and the results indicated that yield of HDI from HMI reached to 69.6% (98.6% HDI selectively) at 270℃, which further increased the yield of the total HDI (HDI_tol) to as high as 95.0%. Recycling of catalyst showed that HDI and HMI yield slightly decreased, and by-product yield increased after the catalyst was reused for 4 times. At last possible reaction mechanism was proposed.

Key words: Non-phosgene, Thermal decomposition, Hexamethylene-1,6-diisocyanate, Hexamethylene-1,6-dicarbamate, Bimetallic supported ZSM-5 catalyst

Yan Cao, Yafang Chi, Ammar Muhammad, Peng He, liguo Wang, Huiquan Li. Non-phosgene synthesis of hexamethylene-1,6-diisocyanate from thermal decomposition of hexamethylene-1,6-dicarbamate over Zn–Co bimetallic supported ZSM-5 catalyst[J]. 中国化学工程学报, 2019, 27(3): 549-555.

参考文献 27

[1]	B.F. Arlas, L. Rueda, P.M. Stefani, K.D. Caba, I. Mondragon, A. Eceiza, Kinetic and thermodynamic studies of the formation of a polyurethane based on 1,6-hexamethylene diisocyanate and poly(carbonate-co-ester)diol, Thermochim. Acta 459(2007) 94-103.
[2]	R.M. Versteegen, R.P. Sijbesma, E.W. Maijer, Polyurethanes:Synthesis and characterization, Angew. Chem. Int. Ed. 38(2010) 2917-2919.
[3]	D.L. Sun, S.J. Xie, J.R. Deng, Z.S. Chao, Progress in clean synthesis of hexamethylene-1,6-diisocyanate, Chem. Ind. Eng. 27(2010) 271-277.
[4]	O. Kreye, H. Mutlu, M.A.R. Meier, Sustainable routes to polyurethane precursors, Green Chem. 15(2013) 1431-1455.
[5]	J.S. Nowick, D.L. Holmes, G. Noronha, E.M. Smith, T.M. Nguyen, S.L. Huang, Synthesis of peptide isocyanates and isothiocyanates, J. Org. Chem. 61(1996) 3929-3934.
[6]	E. Delebecq, J.P. Pascault, B. Boutevin, F. Ganachaud, On the versatility of urethane/urea bonds:Reversibility, blocked isocyanate, and non-isocyanate polyurethane, Chem. Rev. 113(2012) 80-118.
[7]	W.H. Lin, Y.S. Guo, S.A. Dai, An efficient one-pot synthesis of aliphatic diisocyanate from diamine and aiphenyl carbonate, J. Taiwan Inst. Chem. Eng. 50(2015) 322-327.
[8]	Y. Cao, X.T. Li, H.Q. Li, L.G. Wang, G.Y. Zhu, Q. Tang, Heterogeneous synthesis of dimethylhexane-1,6-dicarbamate from 1,6-hexanediamine and methyl carbonate by two-step variable temperature technology in methanol over CeO2 catalyst, Chin. J. Chem. Eng. 23(2) (2014) 446-450.
[9]	H.Q. Li, Y. Cao, X.T. Li, L.G. Wang, F.J. Li, G.Y. Zhu, Heterogeneous catalytic methoxycarbonylation of 1,6-hexanediamine by dimethyl carbonate to dimethylhexane-1,6-dicarbamate, Ind. Eng. Chem. Res. 53(2) (2014) 626-634.
[10]	L.Y. Zhao, P. He, L.G. Wang, A. Muhammad, Y. Cao, H.Q. Li, Catalysts screening, optimization and mechanism studies of dimethylhexane-1,6-dicarbamate synthesis from 1,6-hexanediamine and dimethyl carbonate over Mn(OAc)2 catalyst, Catal. Today 281(2017) 392-401.
[11]	A. Muhammad, Y. Cao, L.G. Wang, P. He, H.Q. Li, Synthesis of hexamethylene-1,6-dicarbamate by methoxycarbonylation of 1,6-hexamethylene diamine with dimethyl carbonate over bulk and hybrid heteropoly acid catalyst, Res. Chem. Intermed. 43(2017) 6951-6972.
[12]	T. Masuda, D. Saylik, L. Diebele. Production of aliphatic isocyanate:Japan Pat, 6239826, 1994.
[13]	S.C. Miranda, C.C. Cabrero, E.F. Gutierrez, P.S. Carnero, M.S. Queralt, P.U. Sola, Isocyanate production procedure, US Pat, 6639101, 2003.
[14]	D.L. Sun, J.Y. Luo, R.Y. Wen, J.R. Deng, Z.S. Chao, Phosgene-free synthesis of hexamethylene-1, 6-diisocyanate by the catalytic decomposition of dimethylhexane-1, 6-dicarbamate over zinc-incorporated berlinite (ZnAlPO4), J. Hazard. Mater. 266(2014) 167-173.
[15]	M.J. Hyun, M. Shin, Y.J. Kim, Y.W. Suh, Phosgene-free decomposition of dimethylhexane-1,6-dicarbamate over ZnO, Res. Chem. Intermed. 42(2016) 57-70.
[16]	C. Jeong, M.J. Hyun, Y.W. Suh, Activity of coprecipitated CuO/ZnO catalysts in the decomposition of dimethylhexane-1,6-dicarbamate, Catal. Commun. 70(2015) 34-39.
[17]	Y. Cao, H. Li, N. Qin, G. Zhu, Kinetics of the decomposition of dimethylhexane-1,6-dicarbamate to 1,6-hexamethylene diisocyanate, Chin. J. Chem. Eng. 23(2015) 775-779.
[18]	C.T. Hung, K.C. Lin, C.B. Wang, S.H. Begum, X. Han, S.B. Liu, Zeolite ZSM-5 supported bimetallic Fe-based catalysts for selective catalytic reduction of NO:effects of acidity and metal loading, Adv. Porous Mater. 4(2016) 189-199.
[19]	N. Rahimi, R. Karimzadeh, Catalytic cracking of hydrocarbons over modified ZSM-5 zeolites to produce light olefins:a review, Appl. Catal. A Gen. 398(2011) 1-17.
[20]	A. Muhammad, Y. Cao, P. He, L.G. Wang, J.Q. Chen, H.Q. Li, An efficient green route for hexamethylene-1,6-diisocyanate synthesis by thermal decomposition of hexamethylene-1,6-dicarbamate over Co3O4/ZSM-5 catalyst:An indirect utilization of CO2, Chin. J. Chem. Eng. 25(2017) 1760-1770.
[21]	L.F. Isernia, FTIR study of the relation, between extra-framework aluminum species and the adsorbed molecular water, and its effect on the acidity in ZSM-5 steamed zeolite, Mater. Res. 16(2013) 792-802.
[22]	X.H. Zhao, L. Wei, J. Julson, J.Z. Gu, Y.H. Cao, Catalytic cracking of inedible camelina oils to hydrocarbon fuels over bifunctional Zn/ZSM-5 catalysts, Korean J. Chem. Eng. 32(2015) 1528-1541.
[23]	S.H. Zhang, Z.X. Gao, S.J. Qing, S.Y. Liu, Y. Qiao, Effect of zinc introduction on catalytic performance of ZSM-5 in conversion of methanol to light olefins, Chem. Pap. 68(2014) 1187-1193.
[24]	Z.J. Wang, H.M. Zhang, L.G. Zhang, J.S. Yuan, S.G. Yan, C.Y. Wang, Low-temperature synthesis of ZnO nanoparticles by solid-state pyrolytic reaction, Nanotechnology 14(2003) 11-15.
[25]	C.W. Tang, C.B. Wang, S.H. Chien, Characterization of cobalt oxides studied by FT-IR, Raman, TPR and TG-MS, Thermochim. Acta 473(2008) 68-73.
[26]	A. Fisher, P. Goodall, M.W. Hinds, S.N. Nelms, D.M. Penny, Atomic spectrometry update. Industrial analysis:Metals, chemicals and advanced materials, J. Anal. At. Spectrom. 19(2004) 1567-1595.
[27]	P.C. Roy, W.H. Doh, S.K. Jo, C.M. Kim, Interaction of methanol and hydrogen on a ZnO (0001) single crystal surface, J. Phys. Chem. C 117(2013) 15116-15121.

Non-phosgene synthesis of hexamethylene-1,6-diisocyanate from thermal decomposition of hexamethylene-1,6-dicarbamate over Zn–Co bimetallic supported ZSM-5 catalyst

Non-phosgene synthesis of hexamethylene-1,6-diisocyanate from thermal decomposition of hexamethylene-1,6-dicarbamate over Zn–Co bimetallic supported ZSM-5 catalyst

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 27

相关文章 10

编辑推荐

Metrics

本文评价

[1]	Weizao Liu, Xiaomei Wang, Zhenpu Lu, Hairong Yue, Bin Liang, Li Lü, Chun Li. Preparation of synthetic rutile via selective sulfation of ilmenite with (NH₄)₂SO₄ followed by targeted removal of impurities[J]. , 2017, 25(6): 821-828.
[2]	Hongying Hao, Yadong Zhang, Xiaoya Chen. Investigation on specific heat capacity and thermal behavior of sodium hydroxyethyl sulfonate[J]. , 2017, 25(3): 319-323.
[3]	Muhammad Ammar, Yan Cao, Peng He, Liguo Wang, Jiaqiang Chen, Huiquan Li. An efficient green route for hexamethylene-1,6-diisocyanate synthesis by thermal decomposition of hexamethylene-1,6-dicarbamate over Co₃O₄/ZSM-5 catalyst: An indirect utilization of CO₂[J]. Chinese Journal of Chemical Engineering, 2017, 25(12): 1760-1770.
[4]	李明春, 赵中亮, 静宇, 刘家涛, 吴玉胜. The Soret and Dufour Effects in Non-thermal Equilibrium Packed Beds with Forced Convection and Endothermic Reactions[J]. Chinese Journal of Chemical Engineering, 2013, 21(8): 867-875.
[5]	农韦健, 陈小鹏, 王琳琳, 梁杰珍, 钟玲萍, 童张法. Thermal Decomposition Kinetics of Abietic Acid in Static Air[J]. Chinese Journal of Chemical Engineering, 2013, 21(7): 724-729.
[6]	梁蕊, 杨美荣, 轩小鹏. Thermal Stability and Thermal Decomposition Kinetics of 1-Butyl-3-methylimidazolium Dicyanamide[J]. , 2010, 18(5): 736-741.
[7]	王艳, 龚磊, 李延斌, 卫芝贤. Combustion Synthesis of La_0.8Sr_0.2MnO₃ and Its Effect on HMX Thermal Decomposition[J]. , 2010, 18(3): 397-401.
[8]	荆琪, 吕秀阳. Kinetics of Non-catalyzed Decomposition of Glucose in High-temperature Liquid Water[J]. , 2008, 16(6): 890-894.
[9]	冯孝贵, 景山, 吴秋林, 陈靖, 宋崇立. 固定床煅烧炉中载铯亚铁氰化钛钾的热分解研究[J]. , 2007, 15(2): 184-189.
[10]	刘润静, 陈建峰, 郭奋, 吉米, 沈志刚. 纳米碳酸钙在非等温条件下热分解动力学及机理研究[J]. , 2003, 11(3): 302-306.