1 Ryan, D.F., Janssen, L.P.B.M., van Dierendonck, L.L., “Circulation time prediction in the scale-up of polymerization reactors with helical ribbon agitators”, Chem. Eng. Sci., 43 (8), 1961-1966 (1988).2 Kumaresan, T., Joshi, J.B., “Effect of impeller design on the flow pattern and mixing in stirred tanks”, Chem. Eng. J., 115 (3), 173-193 (2006).3 Shervin, C.R., Raughley, D.A., Romaszewski, R.A., “Flow visualization scaleup studies for the mixing of viscoelastic fluids”, Chem. Eng. Sci., 46 (11), 2867-2873 (1991).4 Delaplace, G., Leuliet, J.C., Relandeau, V., “Circulation and mixing times for helical ribbon impellers. Review and Experiments”, Exp. Fluids, 28 (2), 170-182 (2000).5 Niedzielska, A., Kuncewicz, C., “Heat transfer and power consumption for ribbon impellers. Mixing efficiency”, Chem. Eng. Sci., 60 (8/9), 2439-2448 (2005).6 Carreau, P.J., Chhabra, R.P., Cheng, J., “Effect of rhecological properties on power consumption with helical ribbon agitators”, AIChE J., 39 (9), 1421-1430 (1993).7 Yap, C.Y., Patterson, W.I., Carreau, P.J., “Mixing with helical ribbon agitators (III) Non-Newtonian fluids”, AIChE J., 25 (3), 516-521 (1979).8 Brito-De La Fuente, E., Choplin, L., Tanguy, P.A., “Mixing with helical ribbon impellers:Effect of highly shear thinning behavior and impeller geometry”, Chem. Eng. Res. Des., 75, 45-52 (1997).9 Novak, V., Rieger, F., “Homogenization with helical screw agitators”, Trans. Inst. Chem. Eng., 47 (10), 335-340 (1969).10 Rieger, F., Novak, V., “Power consumption of agitators in highly viscous non-Newtonian liquids”, Trans. Inst. Chem. Eng., 51, 105-111 (1973).11 Metzner, A.B., Otto, R.E., “Agitation of non-Newtonian fluids”, AIChE J., 3 (1), 3-10 (1957).12 Sestak, J., Zitny, R., Houska, M., “Anchoragitated systems:Power input correlation for pseudoplastic and thixotropic fluids in equilibrium”, AIChE J., 32 (1), 155-158 (1986).13 Tanguy, P.A., Lacroix, R., Bertrand, F., Choplin, L., Brito de la Fuente, E., “Finite element analysis of viscous mixing with a helical ribbon-screw impeller”, AIChE J., 38 (6), 939-944 (1992).14 Castell-Perez, M.E., Steffe, J.F., “Evaluating shear rates for power law fluids in mixer viscometry”, J. Text. Stud., 21, 439-453 (1990).15 Thakur, R.K., Vial, C., Djelveh, G., Labbafi, M., “Mixing of complex fluids with flat-bladed impellers:Effect of impeller geometry and highly shear-thinning behavior”, Chem. Eng. process., 43 (10), 1211-1222 (2004).16 Wang, Z., Mao, Z.S., Yang, C., Shen, X.Q., “Computational fluid dynamics approach to the effect of mixing and draft tube on the pre-cipitation of barium sulfate in a continuous stirred tank”, Chin. J. Chem. Eng., 14 (6), 713-722 (2006).17 Zhang, Y.H., Yang, C., Mao, Z.S., “Large eddy simulation of liquid flow in a stirred tank with improved innerouter iteration algorithm”, Chin. J. Chem. Eng., 14 (3), 321-329 (2006).18 Cui, B., Zhu, Z., Zhang, J., Chen, Y., “The flow simulation and experimental study of low-specific-speed high-speed complex centrifugal impellers”, Chin. J. Chem. Eng., 14 (4), 435-441 (2006).19 Min, J., Gao, Z.M., “Large eddy simulations of mixing time in a stirred tank”, Chin. J. Chem. Eng., 14 (1), 1-7 (2006).20 Shekhar, S.M., Jayanti, S., “Mixing of pseudoplastic fluids using helical ribbon impellers”, AIChE J., 49 (11), 2768-2772 (2003).21 Jiang, S., Fan, W., Zhu, C., Ma, Y., Li, H., “Bubble formation in non-Newtonian fluids using laser image measurement system”, Chin. J. Chem. Eng., 15 (4), 611-615 (2007).22 Iranshahi, A., Heniche, M., Bertrand, F., Tanguy, P.A., “Numerical investigation of the mixing efficiency of the Ekato Paravisc impeller”, Chem. Eng. Sci., 61 (8), 2609-2617 (2006).23 Xu, T., Zhu, Q., Chen, X., Li, W., “Equivalent cake filtration model”, Chin. J. Chem. Eng., 16 (2), 214-217 (2008).24 Kelly, W., Gigas, B., “Using CFD to predict the behavior of power law fluids near axial-flow impellers operating in the transitional flow regime”, Chem. Eng. Sci., 58 (10), 2141-2152 (2003).25 Deglon, D.A., Meyer, C.J., “CFD modelling of stirred tanks:Numerical considerations”, Minerals Eng., 19 (10), 1059-1068 (2006).26 Lane, G.L., Schwarz, M.P., Evans, G.M., “Comparison of CFD methods for modelling of stirred tanks”, In:Proceedings of the 10th Europ. Conf. on Mixing, Delft, the Netherlands, 273-280 (2000).27 Bourne, J.R., Butler, H., “An analysis of the flow produced by helical ribbon impellers”, Trans Inst. Chem. Eng., 47, 11-17 (1969).28 Yao, W., Mishima, M., Takahashi, K., “Numerical investigation on dispersive mixing characteristics of MAXBLEND and double heli-cal ribbons”, Chem. Eng. J., 84, 565-571 (2001).29 Delaplace, G., Guerin, R., Leuliet, J.C., Chhabra, R.P., “An analytical model for the prediction of power consumption for shearthinning fluids with helical ribbon and helical screw ribbon impellers”, Chem. Eng. Sci., 61 (10), 3250-3259 (2006).30 Wang, J.J., Feng, L.F., Gu, X.P., Wang, K., Hu, C.H., “Power consumption of innerouter helical ribbon impellers in viscous Newtonian and non-Newtonian fluids”, Chem. Eng. Sci., 55 (12), 2339-2342 (2000).31 Montante, G., Mostek, M., Jahoda, M., Magelli, F., “CFD simulations and experimental validation of homogenisation curves and mixing time in stirred Newtonian and pseudoplastic liquids”, Chem. Eng. Sci., 60 (8/9), 2427-2437 (2005). |