丙烯聚合的Monte Carlo模拟(Ⅰ)活性杂质对丙烯聚合的影响

• SEPARATION SCIENCE & ENGINEERING • 上一篇下一篇

丙烯聚合的Monte Carlo模拟(Ⅰ)活性杂质对丙烯聚合的影响

罗正鸿; 曹志凯; 苏耀堂

Department of Chemical and Biochemical Engineering, Xiamen University, Xiamen 361005, China

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2006-04-28 发布日期:2006-04-28
通讯作者: 罗正鸿

Monte Carlo Simulation of Propylene Polymerization (Ⅰ) Effects of Impurity on Propylene Polymerization

LUO Zhenghong; CAO Zhikai; SU Yaotang

Department of Chemical and Biochemical Engineering, Xiamen University, Xiamen 361005, China

Received:1900-01-01 Revised:1900-01-01 Online:2006-04-28 Published:2006-04-28
Contact: LUO Zhenghong

摘要/Abstract

摘要： A comprehensive mechanism for propylene polymerization was proposed by considering the effects of main impurities in the material on propylene polymerization. According to the proposed mechanism, Monte Carlo simulation was employed to investigate the polymerization kinetics in order to determine the effects of the main impurities on the polymerization. Significant influences of the main impurities on the rate, number-average degree and controlling capability of hydrogen of the polymerization were analyzed.

关键词: Monte Carlo simulation;active impurity;propylene polymerization kinetics

Abstract: A comprehensive mechanism for propylene polymerization was proposed by considering the effects of main impurities in the material on propylene polymerization. According to the proposed mechanism, Monte Carlo simulation was employed to investigate the polymerization kinetics in order to determine the effects of the main impurities on the polymerization. Significant influences of the main impurities on the rate, number-average degree and controlling capability of hydrogen of the polymerization were analyzed.

Key words: Monte Carlo simulation, active impurity, propylene polymerization kinetics

罗正鸿, 曹志凯, 苏耀堂. 丙烯聚合的Monte Carlo模拟(Ⅰ)活性杂质对丙烯聚合的影响[J]. , DOI: .

LUO Zhenghong, CAO Zhikai, SU Yaotang. Monte Carlo Simulation of Propylene Polymerization (Ⅰ) Effects of Impurity on Propylene Polymerization[J]. , DOI: .

参考文献

1    Neto, A.G.M., Pinto, J.C., “Steady-state modeling of slurry and bulk propylene polymerizations”, Chem. Eng. Sci., 56(13), 4043—4057(2001).
2    Matos, V., Neto, A.G.M., Pinto, J.C., “Method for quan-titative evaluation of kinetic constants in olefin polym-erizations. I. Kinetic study of a conventional Ziegler-Natta catalyst used for propylene polymeriza-tions”, J. Appl. Poly. Sci., 79(11), 2076—2108(2001).
3    Matos, V., Neto, A. G. M., Nele, M., Pinto, J.C., “Method for quantitative evaluation of kinetic constants in olefin polymerizations. II. Kinetic study of a high-activity Ziegler-Natta catalyst used for bulk propylene polymeri-zations”, J. Appl. Poly. Sci., 80(13), 3226—3245(2002).
4    Dube, M.A., Soares, J.B.P., Penlidis, A., “Mathematical modeling of multicomponent chain-growth polymeriza-tion in batch, semibatch, and continuous reactors: A re-view”, Ind. Eng. Chem. Res., 36(4), 966—1015(1997).
5    Hatzantonis, H., Yiannoulakis, H., Yiagopoulos, A., Ki-parissides, C., “Recent developments in modeling gas-phase catalyzed olefin polymerization fluidized-bed reactors: The effect of bubble size variation on the reac-tor’s performance”, Chem. Eng. Sci., 55(16), 3237—3259(2000).
6    Zacca, J.J., Debling, J.A., Ray, W.H., “Reactor resi-dence-time distribution effects on the multistage polym-erization of olefins. 2. Polymer properties: Bimodal polypropylene and linear low-density polyethylene”, Chem. Eng. Sci., 52(12),1941—1967(1997).
7    Zacca, J.J., Debling, J.A., Ray, W.H., “Reactor resi-dence-time distribution effects on the multistage polym-erization of olefins. 3. Multilayered products: Impact polypropylene”, Chem. Eng. Sci., 52(12), 1969—2001 (1997).
8    Luo, Z.H., Zhan, X.L., Chen, F.Q., Yang, Y.R., “Monte Carlo simulation of kinetics of ammonia oxidative de-composition over the commercial propylene ammoxida-tion catalyst (Mo-Bi)”, Chinese J. Chem. Eng., 11(1), 110—114(2003).
9    Chung, I., “Monte Carlo simulation of free radical te-lomerization”, Polymer, 41, 5643—5651(2000).
10    Luo, Z.H., Li, J., Zhan, X.L., Yang, Y.B., “Monte Carlo simulation of solid phase graft polymerization of acrylic acid onto polypropylene”, J. Chem. Eng. Jpn., 37(6),  737—743(2004).
11    Platkowski, K., Reichert, K., “Application of Monte Carlo methods for modeling of polymerization reactions”, Polymer, 40,1057—1066(1999).
12    Zacca, J.J., Ray, W.H., “Modelling of the liquid phase polymerization of olefins in loop reactors”, Chem. Eng. Sci., 48 (22),3743—3765(1993).
13    Alizadeh, M., Mostoufia, N., Pourmahdian, S., “Model-ing of fluidized bed reactor of ethylene polymerization”, Chem. Eng. Sci., 97(1), 27—35(2004).
14    Choi, K.Y., Zhao, X., Tang, S., “Population balance mod-eling for a continuous gas phase olefin polymerization re-actor”, J. Appl. Poly. Sci., 53(6),1589—1597(1994).
15    Soares, J.B.P., “Mathematical modeling of the micro-structure of polyolefins made by coordination polymeri-zation: A review”, Chem. Eng. Sci., 56(13), 4131—4153 (2001).
16    Chen, C.M., Ray, W.H., “Polymerization of olefins through heterogeneous catalysis XI: Gas phase sequen-tial polymerization kinetics”, J. Appl. Poly. Sci., 49(5),1573—1588(1993).
17    Hutchinson, R.A., Chen, C.M., Ray, W.H., “Polymeriza-tion of olefins through heterogeneous catalysis X. Mod-eling of particle growth and morphology”, J. Appl. Poly. Sci., 44(8),1389—1414(1992).