用引射技术提高离心泵的汽蚀性能

• TRANSPORT PHENOMENA & FLUID MECHANICS • 上一篇下一篇

用引射技术提高离心泵的汽蚀性能

崔宝玲^a;朱祖超^b;张剑慈^c;吴昱^a;陈鹰^a

^a State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China ^b Zhejiang Provincial Key Labof Modern Textile Machinery, Hangzhou 310018, China
^c Department of Mechanical Engineering, Quzhou College, Quzhou 324000, China

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2004-10-28 发布日期:2004-10-28
通讯作者: 崔宝玲

Improving Suction Performance of Centrifugal Pumps by Using Jetting Device

CUI Baoling^a; ZHU Zuchao^b;ZHANG Jianci^c; WU Yu^a; CHEN Ying^a

^a State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China ^b Zhejiang Provincial Key Labof Modern Textile Machinery, Hangzhou 310018, China
^c Department of Mechanical Engineering, Quzhou College, Quzhou 324000, China

Received:1900-01-01 Revised:1900-01-01 Online:2004-10-28 Published:2004-10-28
Contact: CUI Baoling

摘要/Abstract

摘要： Improving the suction performance of centrifugal pumps by using jetting device is presented. The theoretical analysis, experimental study and engineering implementation show that suction performance of centrifugal pump can be improved with jetting device and be used for delivering the liquid media requiring high suction performance, whereas the efficiency and head of the pump will decrease a little. The effect of feed-back jetting on suction performance is the most obvious at design point. The suitable rate of feed-back flow is 2%-5%.

关键词: 引射技术;离心泵;汽蚀性能;喷射装置;NPSHa

Abstract: Improving the suction performance of centrifugal pumps by using jetting device is presented. The theoretical analysis, experimental study and engineering implementation show that suction performance of centrifugal pump can be improved with jetting device and be used for delivering the liquid media requiring high suction performance, whereas the efficiency and head of the pump will decrease a little. The effect of feed-back jetting on suction performance is the most obvious at design point. The suitable rate of feed-back flow is 2%-5%.

Key words: centrifugal pump, inducer, suction performance, jetting device

崔宝玲,朱祖超,张剑慈,吴昱,陈鹰. 用引射技术提高离心泵的汽蚀性能[J]. , DOI: .

CUI Baoling, ZHU Zuchao,ZHANG Jianci, WU Yu, CHEN Ying. Improving Suction Performance of Centrifugal Pumps by Using Jetting Device[J]. , DOI: .

2620

HTML			PDF

最新录用	在线预览	正式出版	最新录用	在线预览	正式出版
0	0	0	0	0	2620

来源	本网站	其他网站

次数	50	2570
比例	2%	98%

摘要

1835

最新录用	在线预览	正式出版

0	0	1835

来源	本网站	其他网站

次数	40	1795
比例	2%	98%