A review of internally heat integrated distillation column

doi:10.1016/j.cjche.2018.08.021

Chinese Journal of Chemical Engineering ›› 2019, Vol. 27 ›› Issue (6): 1272-1281.DOI: 10.1016/j.cjche.2018.08.021

• Special Issue: Separation Process Intensification of Chemical Engineering • Previous Articles Next Articles

A review of internally heat integrated distillation column

Jing Fang^1,2, Xiaomin Cheng^1,2, Zhongyang Li^1,2, Hao Li^1,2, Chunli Li^1,2

1 School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin 300130, China;
2 National-Local Joint Engineering Laboratory for Energy Conservation of Chemical Process Integration and Resources Utilization, Tianjin 300130, China

Received:2018-07-06 Revised:2018-08-25 Online:2019-08-19 Published:2019-06-28
Contact: Jing Fang
Supported by:
Supported by the National Natural Science Foundation of China, Research on Energysaving Mechanism and Dynamic Behavior of Optimizing Trans-wall Heat Transfer Processes of Dividing Wall Columns (21306036), and High-level Talent Support Project of Hebei Province, Research on Energy Integration and Process Control of Concentric Internal Thermally Coupled Distillation System (A2017002032).

A review of internally heat integrated distillation column

Jing Fang^1,2, Xiaomin Cheng^1,2, Zhongyang Li^1,2, Hao Li^1,2, Chunli Li^1,2

1 School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin 300130, China;
2 National-Local Joint Engineering Laboratory for Energy Conservation of Chemical Process Integration and Resources Utilization, Tianjin 300130, China

通讯作者: Jing Fang
基金资助:
Supported by the National Natural Science Foundation of China, Research on Energysaving Mechanism and Dynamic Behavior of Optimizing Trans-wall Heat Transfer Processes of Dividing Wall Columns (21306036), and High-level Talent Support Project of Hebei Province, Research on Energy Integration and Process Control of Concentric Internal Thermally Coupled Distillation System (A2017002032).

Abstract

Abstract: The energy consumption of distillation operation determines the amount of energy consumption throughout the chemical separation process. A heat integrated distillation column (HIDiC) could greatly reduce the irreversibility of the distillation process, so it gradually becomes a research hotspot. There are two major techniques for heat integration in HIDiC:internally and externally. This review paper describes the major research aspects of an internally heat integrated distillation column (IHIDiC), including the heat transfer models, various design structures (including the two-column HIDiC, Concentric HIDiC, Shell and tube HIDiC, Plate-fin HIDiC and the Super HIDiC, etc.), experimental research, simulation and optimization, process control research, as well as industrial plants and potential industrial applications. Among them, the heat transfer performance of various structures was analyzed of the various design structures based on experimental research, the effects of different factors (including relative volatility, reflux ratio, compression ratio, etc.) on HIDiC energy consumption or TAC is summarized in the simulation part. The calculation methods of the overall heat transfer coefficient and heat transfer models are summarized. The various optimization algorithms and optimization results of simplified HIDiC are summarized in the optimization part. The research status and the key technical issues in various aspects of HIDiC are summarized in this paper. In order to meet the requirements of industrial energy efficiency, the selection of multi-component separation distillation configurations needs to be considered more diversified, and internal complex coupling relationship of HIDiC needs to be further studied.

Key words: HIDIC, Distillation, Heat integrated, Energy consumption, Energy conservation

摘要： The energy consumption of distillation operation determines the amount of energy consumption throughout the chemical separation process. A heat integrated distillation column (HIDiC) could greatly reduce the irreversibility of the distillation process, so it gradually becomes a research hotspot. There are two major techniques for heat integration in HIDiC:internally and externally. This review paper describes the major research aspects of an internally heat integrated distillation column (IHIDiC), including the heat transfer models, various design structures (including the two-column HIDiC, Concentric HIDiC, Shell and tube HIDiC, Plate-fin HIDiC and the Super HIDiC, etc.), experimental research, simulation and optimization, process control research, as well as industrial plants and potential industrial applications. Among them, the heat transfer performance of various structures was analyzed of the various design structures based on experimental research, the effects of different factors (including relative volatility, reflux ratio, compression ratio, etc.) on HIDiC energy consumption or TAC is summarized in the simulation part. The calculation methods of the overall heat transfer coefficient and heat transfer models are summarized. The various optimization algorithms and optimization results of simplified HIDiC are summarized in the optimization part. The research status and the key technical issues in various aspects of HIDiC are summarized in this paper. In order to meet the requirements of industrial energy efficiency, the selection of multi-component separation distillation configurations needs to be considered more diversified, and internal complex coupling relationship of HIDiC needs to be further studied.

关键词: HIDIC, Distillation, Heat integrated, Energy consumption, Energy conservation

Jing Fang, Xiaomin Cheng, Zhongyang Li, Hao Li, Chunli Li. A review of internally heat integrated distillation column[J]. Chinese Journal of Chemical Engineering, 2019, 27(6): 1272-1281.

Jing Fang, Xiaomin Cheng, Zhongyang Li, Hao Li, Chunli Li. A review of internally heat integrated distillation column[J]. 中国化学工程学报, 2019, 27(6): 1272-1281.

References

[1] R.E. Fitzmorris, R.S.H. Mah, Improving distillation column design using thermodynamic availability analysis, AIChE J. 26(2) (1980) 265-273.
[2] R.S.H. Mah, J.J. Nicholas, R.B. Wodnik, Distillation with secondary reflux and vaporization:A comparative evaluation, AIChE J. 23(5) (2010) 651-658.
[3] D. Bruinsma, S. Spoelstra, Heat pumps in distillation, ECN (7) (2010).
[4] Z. Olujic, F. Fakhri, A. de Rijke, J. de Graauw, P.J. Jansens, Internal heat integration-The key to an energy conserving distillation column, J. Chem. Technol. Biotechnol. 78(2-3) (2010) 241-248.
[5] T. Wakabayashi, S. Hasebe, Effect of internal heat exchange rate distribution on energy saving in heat integrated distillation column (HIDiC), Chem. Eng. 37(6) (2011) 499-505.
[6] M.J. Olanrewaju, B. Huang, A. Afacan, Development of a simultaneous continuum and noncontinuum state estimator with application on a distillation process, AIChE J. 58(2) (2012) 480-492.
[7] T. Takamatsu, M. Nakaiwa, K.J. Huang, T. Akiya, H. Noda, T. Nakanishi, K. Aso, Simulation oriented development of a new heat integrated distillation column and its characteristics for energy saving, Comput. Chem. Eng. 21(10) (1997) S243-S247.
[8] M. Gadalla, L. Jiménez, Z. Olujic, P.J. Jansens, A thermo-hydraulic approach to conceptual design of an internally heat-integrated distillation column (i-HIDiC), Comput. Chem. Eng. 31(10) (2007) 1346-1354.
[9] B. Suphanit, Design of internally heat-integrated distillation column (HIDiC):Uniform heat transfer area versus uniform heat distribution, Energy 35(3) (2010) 1505-1514.
[10] T. Wakabayashi, S. Hasebe, Design of heat integrated distillation column by using H-xy and T-xy diagrams, Comput. Chem. Eng. 56(2013) 174-183.
[11] L. Cong, L. Chang, X.G. Liu, Development of extended generic model control for highpurity heat integrated distillation column using online concentration estimation, Ind. Eng. Chem. Res. 54(51) (2015) 12897-12907.
[12] J.C. Wang, G.E. Henke, Tridiagonal matrix for distillation, Hydrocarb. Process. 45(8) (1966) 155-163.
[13] L. Yng Hwang, On the nonlinear wave theory for dynamics of binary distillation columns, AIChE J. 37(5) (2010) 705-723.
[14] L. Yng Hwang, Nonlinear wave theory for dynamics of binary distillation columns, AIChE J. 37(5) (1991) 705-723.
[15] X.G. Liu, Y.X. Zhou, C. Lin, Z. Jie, Nonlinear wave modeling and dynamic analysis of internal thermally coupled distillation columns, AIChE J. 58(4) (2012) 1146-1156.
[16] L. Cong, L. Chang, X.G. Liu, Nonlinear-wave based analysis and modeling of heat integrated distillation column, Sep. Purif. Technol. 150(2015) 119-131.
[17] H.H. Tung, J.F. Davis, R.S.H. Mah, Fractionating condensation and evaporation in plate-fin devices, AIChE J. 32(7) (1986) 1116-1124.
[18] Ž. Olujić, L. Sun, A.D. Rijke, P.J. Jansens, Conceptual design of an internally heat integrated propylene-propane splitter, Energy 31(15) (2006) 3083-3096.
[19] B. Suphanit, Optimal heat distribution in the internally heat-integrated distillation column (HIDiC), Energy 36(7) (2011) 4171-4181.
[20] Z. Olujic, L. Sun, M. Gadalla, A.D. Rijke, P.J. Jansens, Enhancing thermodynamic efficiency of energy intensive distillation columns via internal heat integration, Chem. Biochem. Eng. Q. 22(4) (2008) 383-392.
[21] J. Goldemberg, Biomass and energy, Quim Nova 32(3) (2009) 582-587.
[22] H. Noda, T. Takamatsu, K. Aso, T. Nakanishi, K. Yoshida, M. Nakaiwa, T. Mukaida, N. Kuratani, Development on a coaxial heat integrated distillation column (HIDiC), Korean J. Chem. Eng. 17(5) (2000) 593-596.
[23] R.A. De, W. Tesselaer, M.A. Gadalla, Z. Olujic, P.J. Jansens, Heat and mass transfer characteristics of an annular sieve tray, IChemE Symposium Series, 112, 2006427-452.
[24] H. Noda, T. Mukaida, M. Kaneda, K. Kataoka, M. Nakaiwa, Internal column-tocolumn heat transfer characteristics for energy-saving distillation system, Proceedings of the Distillation and Absorption, London UK, 2006.
[25] L.H. Xu, D.W. Chen, B.H. Yan, X.G. Yuan, Experimental investigation on heat exchange and separation performance of an annular structured internal heatintegrated distillation column, Chin. J. Chem. Eng. 22(10) (2014) 1087-1091.
[26] G.H.S.F. Ponce, M. Alves, J.C.C. Miranda, R. Maciel Filho, M.R. Wolf Maciel, Using an internally heat-integrated distillation column for ethanol-water separation for fuel applications, Chem. Eng. Res. Des. 95(2015) 55-63.
[27] J. Fang, R. Zhao, C.I. Li, B.H. Xuan, Heat transfer property of concentric internally heat integrated distillation column, Chem. Ind. Eng. Prog. 35(8) (2016) 2342-2349.
[28] M. Nakaiwa, K.J. Huang, M. Owa, T. Akiya, T. Nakane, M. Sato, T. Takamatsu, H. Yoshitome, Potential energy savings in ideal heat-integrated distillation column, Appl. Therm. Eng. 18(11) (1998) 1077-1087.
[29] K. Iwakabe, M. Nakaiwa, K. Huang, T. Nakanishi, A. Røsjorde, T. Ohmori, A. Endo, T. Yamamoto, Energy saving in multicomponent separation using an internally heatintegrated distillation column (HIDiC), Appl. Therm. Eng. 26(13) (2006) 1362-1368.
[30] M. Gadalla, Z. Olujic, L. Sun, A. De Rijke, P.J. Jansens, Pinch analysis-based approach to conceptual design of internally heat-integrated distillation columns, Chem. Eng. Res. Des. 83(8) (2005) 987-993.
[31] K. Hamaguchi, L.L. Yang, L. Hanzo, Internally heat-integrated distillation columns:A review, Chem. Eng. Res. Des. 81(1) (2003) 162-177.
[32] G.G. Haselden, Distillation processes and apparatus, United States Patent, 4025398(1977).
[33] J.D. Seader, Continuous distillation apparatus and method, United States Patent, 4234391(1980).
[34] J.D. Seader, Continuous distillation apparatus and method of operation, EP, EP0010253(1981).
[35] J.D. Seader, S.C. Baer, Continuous distillation apparatus and method, Final Report, United States, 1984.
[36] H.H. Tung, J.F. Davis, R.S.H. Mah, Fractionating condensation and evaporation in plate-fin devices, AIChE J. 32(32) (1986) 1116-1124.
[37] Hugill, System for stripping and rectifying a fluid mixture, US, WO2003011418A1(2003).
[38] S. Sunder, P.A. Houghton, V.V. Kuznetsov, Plate-fin exchangers with textured surfaces, United States Patent, 6834515(2004).
[39] Hugill, J. Anthony, System for stripping and rectifying a fluid mixture, United States Patent, 7111673(2006).
[40] R. Govind, Separate striping and rectification columns, US Patent, 4615770(1986).
[41] J.D. Graauw, M.J. Steenbakker, A.D. Rijke, Z. Olujic, P.J. Jansens, Heat Integrated Distillation Column, European Patent Office, 2003.
[42] A.D. Rijke, Development of a concentric internally heat integrated distillation column (HIDiC), Ph.D. Thesis, Delft University of Technology (2007).
[43] O.S.L.Bruinsma,T.Krikken,J.Cot,M.Sarić,S.A.Tromp, Ž.Olujić,A.I.Stankiewicz, Thestructured heat integrated distillation column, Chem. Eng. Res. Des. 90(4) (2012) 458-470.
[44] K. Aso, H. Matsuo, H. Noda, Internal heat exchange type distillation column, European Patent, WO 96/06665(1996).
[45] H.F. Cong, X.G. Li, H. Li, J.M. Patrick, X. Gao, Performance analysis and structural optimization of multi-tube type heat integrated distillation column (HIDiC), Sep. Purif. Technol. 188(2017) 303-315.
[46] G. Ondrey, Chementator:This distillation column promises substantial energy reductions, Chem. Eng. 10(2012).
[47] D. Maiti, A.K. Jana, A.N. Samanta, A novel heat integrated batch distillation scheme, Appl. Energy 88(12) (2011) 5221-5225.
[48] M. Nakaiwa, K. Huang, A. Endo, T. Ohmori, T. Akiya, T. Takamatsu, Internally heatintegrated distillation columns:A review, Chem. Eng. Res. Des. 81(1) (2003) 162-177.
[49] A.K. Jana, A new divided-wall heat integrated distillation column (HIDiC) for batch processing:Feasibility and analysis, Appl. Energy 172(2016) 199-206.
[50] M.Nakaiwa, K.Huang, K.Naito, A.Endo, T. Akiya,T.Nakane,T. Takamatsu, Parameter analysis and optimization of ideal heat integrated distillation columns, Comput. Chem. Eng. 25(4-6) (2001) 737-744.
[51] C. Pritchard, M. Nakaiwa, Adding Internal Heat Integration to Pressure-swing Distillation (PSD) Process, University of Prince Edward Island & Interdisciplinary Phd Program, 2000.
[52] K. Huang, L. Shan, Q. Zhu, J. Qian, Adding rectifying/stripping section type heat integration to a pressure-swing distillation (PSD) process, Appl. Therm. Eng. 28(8) (2008) 923-932.
[53] L.H. Xu, X.G. Yuan, D.W. Chen, Y.Q. Luo, K. Yu, Reversibility analysis for design optimization of an internally heat-integrated distillation column, Chem. Eng. Technol. 36(7) (2013) 1147-1156.
[54] K. Iwakabe, M. Nakaiwa, K. Huang, T. Nakanishi, A. Rosjorde, T. Ohmori, A. Endo, T. Yamamoto, Performance of an internally heat-integrated distillation column (HIDiC) in separation of ternary mixtures, J. Chem. Eng. Jpn 39(4) (2006) 417-425.
[55] K.J. Huang, K. Matsuda, T. Takamatsu, M. Nakaiwa, The influences of pressure distribution on an ideal heat-integrated distillation column (HIDiC), J. Chem. Eng. Jpn 39(6) (2006) 652-660.
[56] B. Kiran, A.K. Jana, A.N. Samanta, A novel intensified heat integration in multicomponent distillation, Energy 41(1) (2012) 443-453.
[57] R. Gutiérrez-Guerra, J. Cortez-González, R. Murrieta-Dueñas, J.G. SegoviaHernández, S. Hernández, A. Hernández-Aguirre, Design and optimization of heatintegrated distillation column schemes through a new robust methodology coupled with a Boltzmann-based estimation of distribution algorithm, Ind. Eng. Chem. Res. 53(27) (2014) 11061-11073.
[58] Andreas Harwardt, Wolfgang Marquardt, Heat-integrated distillation columns:Vapor recompression or internal heat integration? International Conference on Intelligent Computation Technology & Automation 2012, pp. 702-705.
[59] J.R. Alcántara-Avila, F.I. Gómez-Castro, J.G. Segovia-Hernández, K.I. Sotowa, T. Horikawa, Optimal design of cryogenic distillation columns with side heat pumps for the propylene/propane separation, Chem. Eng. Process. Process Intensif. 82(8) (2014) 112-122.
[60] V.R. Dhole, B. Linnhoff, Distillation column targets, Comput. Chem. Eng. 17(5-6) (1993) 549-560.
[61] J.R. Alcántara-Avila, S. Hasebe, M. Kano, New synthesis procedure to find the optimal distillation sequence with internal and external heat integrations, Ind. Eng. Chem. Res. 52(13) (2013) 4851-4862.
[62] T. Wakabayashi, S. Hasebe, Higher energy saving with new heat integration arrangement in heat-integrated distillation column, AIChE J. 61(10) (2015) 3479-3488.
[63] T. Takamatsu, I. Hashimoto, Y. Hashimoto, Selection of manipulated variables to minimize interaction in multivariate control of a distillation column, Kagaku Kōgaku Ronbunshū 11(6) (1985) 640-646.
[64] Y. Zhu, X.G. Liu, Investigating control schemes for an ideal thermally coupled distillation column (ITCDIC), Chem. Eng. Technol. 28(9) (2005) 1048-1055.
[65] K.J. Huang, M. Nakaiwa, T. Akiya, K. Aso, T. Takamatsu, A numerical consideration on dynamic modeling and control of ideal heat integrated distillation columns, J. Chem. Eng. Jpn 29(2) (1996) 344-351.
[66] T. Takamatsu, K. Matsuda, K.G. Huang, K. Iwakabe, Choosing more controllable configuration for an internally heat-integrated distillation column (SC), J. Chem. Eng. Jpn 39(8) (2006) 818-825.
[67] K.J. Huang, D.Z. Zhan, M. Nakaiwa, T. Nakan, T. Takamatsu, Control of ideal heat integrated distillation columns, Chin. J. Chem. Eng. 7(4) (1999) 283-294.
[68] M. Nakaiwa, K.J. Huang, M. Owa, T. Akiya, T. Nakane, T. Takamatsu, Operating an ideal heat integrated distillation column with different control algorithms, Comput. Chem. Eng. 22(12) (1998) S389-S393.
[69] K.J. Huang, S.J. Wang, K. Iwakabe, L. Shan, Q. Zhu, Temperature control of an ideal heat-integrated distillation column (HIDiC), Chem. Eng. Sci. 62(22) (2007) 6486-6491.
[70] K.J. Huang,X. Luo, Boosting temperature inferential control performance indistillation columns, Hydrocarb. Process. 89(7) (2010) 75.
[71] K.J. Huang, J.X. Qian, M. Nakaiwa, T. Nakane, T. Takamatsu, Assessment of control configurations for a general heat integrated distillation column, Chin. J. Chem. Eng. 8(4) (2000) 339-346.
[72] K.J. Huang, M. Nakaiwa, T. Takamatsu, Considering process nonlinearity in dualpoint composition control of a high-purity ideal heat integrated distillation column, Chin. J. Chem. Eng. 9(1) (2001) 58-64.
[73] Z. Yu, X.G. Liu, Dynamics and control of high purity heat integrated distillation columns, Ind. Eng. Chem. Res. 44(23) (2005) 8806-8814.
[74] X.G. Liu, C. Wang, L. Cong, Adaptive robust generic model control of high-purity internal thermally coupled distillation column, Chem. Eng. Technol. 34(1) (2011) 111-118.
[75] X.G. Liu, C.Y. Wang, C. Lin, D. Feng, Adaptive generalised predictive control of high purity internal thermally coupled distillation column, Can. J. Chem. Eng. 90(2) (2012) 420-428.
[76] X.G. Liu, L. Cong, Y.X. Zhou, Nonlinear model predictive control based on wave model of high-purity internal thermally coupled distillation columns, Ind. Eng. Chem. Res. 52(19) (2013) 6470-6479.
[77] X.G. Liu, Y.X. Zhou, C. Lin, D. Feng, High-purity control of internal thermally coupled distillation columns based on nonlinear wave model, J. Process Control 21(6) (2008) 920-926.
[78] A.K. Jana, Differential geometry-based adaptive nonlinear control law:Application to an industrial refinery process, IEEE Trans. Ind. Inf. 9(4) (2013) 2014-2022.
[79] S. Banerjee, A.K. Jana, High gain observer based extended generic model control with application to a reactive distillation column, J. Process Control 24(4) (2014) 235-248.
[80] Y.J. Wang, J.B. Rawlings, A new robust model predictive control method I:Theory and computation, J. Process Control 14(3) (2004) 231-247.
[81] Y.J. Wang, J.B. Rawlings, A new robust model predictive control method. Ⅱ:Examples, J. Process Control 14(3) (2004) 249-262.
[82] C. Lin, X.G. Liu, C.Y. Wang, Dynamic matrix control of a high-purity internal thermally coupled distillation column, Can. J. Chem. Eng. 92(4) (2014) 696-702.
[83] K. Meyer, T. Bisgaard, J.K. Huusom, J. Abildskov, Supervisory model predictive control of the heat integrated distillation column, IFAC Papers On Line, 50-12017, pp. 7375-7380.
[84] K. Matsuda, K. Iwakabe, M. Nakaiwa, Recent advances in internally heat-integrated distillation columns (HIDiC) for sustainable development, J. Chem. Eng. Jpn 45(6) (2012) 363-372.
[85] K. Horiuchi, Energy-saving characteristic of heat integrated distillation column technology applied to multi-component petroleum distillation, Institution of Chemical Engineers Symposium Series in Distillation & Absorption 2006, p. 152.
[86] K. Kataoka, H. Noda, H. Yamaji, T. Mukaida, M. Kaneda, A Compressor-free Hidic System for Recovery of Waste Solvent Mixtures, World Congress of Chemical Engineering, Montreal, Canada, 2009.
[87] K. Horiuchi, K. Matsuda, K. Iwakabe, M. Nakaiwa, Evaluation of economical and environmental performance of an internally heat-integrated distillation column (HIDiC), Kagaku Kogaku Ronbunshu 34(4) (2008) 444-447.
[88] K. Iwakabe, K.Horiuchi, K. Matsuda, T. Nakanishi, M. Ikeda, S. Taniguchi, T. Yamamoto, S. Kataoka, T. Ohmori, M. Nakaiwa, Analysis of operation results of the internally heat integrated distillation column (HIDiC) pilot pant in Japan, AIChE Meeting (2008).
[89] K. Horiuchi, M. Nakaiwa, K. Iwakabe, K. Matsuda, M. Toda, Intensification of the process flow in the pilot plant of an internally heat-integrated distillation column (HIDiC), Chem. Eng. 34(1) (2008) 70-75.
[90] K.Kataoka, H.Noda,N. Kuratani,T.Mukaida, M.Kaneda, H. Yamaji,M. Nakaiwa,Plate efficiency and heat transfer characteristics in heat-integrated distillation, Asian Pacific Confederation of Chemical Engineering Congress Program 2005, pp. 1-10.
[91] G.S. Wu, K.J. Huang, H.S. Chen, S.F. Wang, N.N. Wei, S.J. Wang, Simplified design and control of an ideal heat-integrated distillation column (ideal HIDiC), Asia Pac. J. Chem. Eng. 7(6) (2012) 912-927.
[92] H.S. Chen, K.J. Huang, S.F. Wang, A novel simplified configuration for an ideal heatintegrated distillation column (ideal HIDiC), Sep. Purif. Technol. 73(2) (2010) 230-242.
[93] J. Stichlmair, T. Frey, Reactive distillation processes, Chem. Eng. Technol. 22(2) (2010) 95-103.
[94] S.J. Wang, D.S.H. Wong, S.W. Yu, Design and control of transesterification reactive distillation with thermal coupling, Comput. Chem. Eng. 32(12) (2008) 3030-3037.
[95] D.D. Awachar, S.P. Shirsat, N.V. Sancheti, Simulation of transesterification reactive distillation with total thermal coupling, Int. J. Innov. Eng. Technol. 5(3) (2015) (2319-1058).
[96] K. Cheng, S.J. Wang, D.S.H. Wong, Steady-state design of thermally coupled reactive distillation process for the synthesis of diphenyl carbonate, Comput. Chem. Eng. 52(10) (2013) 262-271.
[97] S. Banerjee, A.K. Jana, Internally heat integrated batch distillation:Vapor recompression and nonlinear control, Sep. Purif. Technol. 189(2017) 267-278.
[98] B. Kiran, A.K. Jana, Introducing vapor recompression mechanism in heat-integrated distillation column:Impact of internal energy driven intermediate and bottom reboiler, AIChE J. 61(1) (2015) 118-131.
[99] B. Kiran, A.K. Jana, Thermal integration of vapor recompression in a heat-integrated distillation:Impact of multiple intermediate reboilers, Chem. Eng. Res. Des. 114(2016) 171-179.

A review of internally heat integrated distillation column

A review of internally heat integrated distillation column

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Yingxi Gao, Jiayi Shi, Jie Wang, Fan Zhang, Shichao Tian, Zhiyong Zhou, Zhongqi Ren. Enrichment of nervonic acid in Acer truncatum Bunge oil by combination of two-stage molecular distillation, one-stage urea complexation and five-stage solvent crystallization [J]. Chinese Journal of Chemical Engineering, 2023, 59(7): 61-71.
[2]	Kejin Huang, Shuaishuai Han, Lijing Zang, Haisheng Chen, Yihang Luo, Liang Zhang, Yang Yuan, Xing Qian, Shaofeng Wang. Configuring topologically optimum vapor recompressed dividing-wall distillation columns to maximize operating efficiency [J]. Chinese Journal of Chemical Engineering, 2023, 57(5): 247-264.
[3]	Xia Xiong, Zuohua Liu, Changyuan Tao, Yundong Wang, Fangqin Cheng, Hong Li. Reduced power consumption in stirred vessel with high solid loading by equipping punched baffles [J]. Chinese Journal of Chemical Engineering, 2023, 56(4): 203-214.
[4]	Xinhao Li, Qing Ye, Jinlong Li, Lingqiang Yan, Xue Jian, Licheng Xie, Jianyu Zhang. Investigation of energy-efficient heat pump assisted heterogeneous azeotropic distillation for separating of acetonitrile/ethyl acetate/n-hexane mixture [J]. Chinese Journal of Chemical Engineering, 2023, 55(3): 20-33.
[5]	Wei Qin, Lijing Zang, Kejin Huang, Haisheng Chen, Yang Yuan, Xing Qian, Liang Zhang, Shaofeng Wang. Reinforced temperature control of a reactive double dividing-wall distillation column [J]. Chinese Journal of Chemical Engineering, 2023, 54(2): 288-295.
[6]	Qinggang Xu, Yasen Dai, Qing Zhao, Zhengrun Chen, Peizhe Cui, Zhaoyou Zhu, Yinglong Wang, Jun Gao, Yixin Ma. Economy, environmental assessment and energy conservation for separation of isopropanol/diisopropyl ether/water multi-azeotropes via extractive distillation coupled pervaporation process [J]. Chinese Journal of Chemical Engineering, 2023, 54(2): 353-363.
[7]	Zhiwei Wang, Yu Zhang, Zhi Zhang, Daowei Zhou, Zhikai Cao, Yong Sha. Investigation on catalytic distillation for ethyl acetate production with different catalytic packing structures [J]. Chinese Journal of Chemical Engineering, 2023, 53(1): 63-72.
[8]	Xinqiang You, Kai Zhao, Ling Li, Ting Qiu. Ionic liquids as entrainer in extractive distillation for effectively separating 1-propanol–water azeotropic mixture [J]. Chinese Journal of Chemical Engineering, 2022, 49(9): 224-233.
[9]	Jia Ren, Zengqiang Chen, Mingwei Sun, Qinglin Sun, Zenghui Wang. Proportion integral-type active disturbance rejection generalized predictive control for distillation process based on grey wolf optimization parameter tuning [J]. Chinese Journal of Chemical Engineering, 2022, 49(9): 234-244.
[10]	Jun Li, Liqiang Zhang, Xiao Zhu, Mengze Zhang, Tai Feng, Xiqiang Zhao, Tao Wang, Zhanlong Song, Chunyuan Ma. Systematic investigation of SO₂ adsorption and desorption by porous powdered activated coke: Interaction between adsorption temperature and desorption energy consumption [J]. Chinese Journal of Chemical Engineering, 2022, 48(8): 140-148.
[11]	Xiaomin Qiu, Yuanyuan Shen, Zhengkun Hou, Qi Wang, Zhaoyou Zhu, Yinglong Wang, Jingwei Yang, Jun Gao. Mechanism analysis of solvent selectivity and energy-saving optimization in vapor recompression-assisted extractive distillation for separation of binary azeotrope [J]. Chinese Journal of Chemical Engineering, 2022, 46(6): 271-279.
[12]	Song Hu, Jinlong Li, Qihua Wang, Weisheng Yang. Design and optimization of an integrated process for the purification of propylene oxide and the separation of propylene glycol by-product [J]. Chinese Journal of Chemical Engineering, 2022, 45(5): 111-120.
[13]	Hui Pan, Xinshuang Li, Yichao Shen, Xiang Wu, Feng Ju, Yuzhe Li, Gaosheng Wu, Bo Ai, Baoyun Xu, Hao Ling. Novel design of lubricant-type vacuum distillation process for lube base oils production from hydrocracking tail oil [J]. Chinese Journal of Chemical Engineering, 2022, 45(5): 121-132.
[14]	Jun Pan, Xianli Xu, Zhaohui Wang, Shi-Peng Sun, Zhaoliang Cui, Lassaad Gzara, Iqbal Ahmed, Omar Bamaga, Mohammed Albeirutty, Enrico Drioli. Innovative hydrophobic/hydrophilic perfluoropolyether (PFPE)/polyvinylidene fluoride (PVDF) composite membrane for vacuum membrane distillation [J]. Chinese Journal of Chemical Engineering, 2022, 45(5): 248-257.
[15]	Ran An, Shengxin Chen, Shun Hou, Yuting Zhu, Chunhu Li, Xinbao Zhu, Ruixia Liu, Weizhong An. Simulation and design of a heat-integrated double-effect reactive distillation process for propylene glycol methyl ether production [J]. Chinese Journal of Chemical Engineering, 2022, 52(12): 103-114.