Theoretical and experimental assessment of a novel method to establish the complete measurement range of the calorimeter and its limit of detection and quantification

doi:10.1016/j.cjche.2021.08.019

Chinese Journal of Chemical Engineering ›› 2022, Vol. 44 ›› Issue (4): 466-473.DOI: 10.1016/j.cjche.2021.08.019

Previous Articles Next Articles

Theoretical and experimental assessment of a novel method to establish the complete measurement range of the calorimeter and its limit of detection and quantification

Vesna Krsti?

af005 Mining and Metallurgy Institute Bor, Zeleni Bulevar 35, 19210 Bor, Serbia;
af010. University of Belgrade, Technical Faculty Bor, VJ 12, 19210 Bor, Republik of Serbia

Received:2020-03-04 Revised:2021-07-23 Online:2022-06-18 Published:2022-04-28
Contact: Vesna Krsti?,E-mail:vesna.krstic@irmbor.co.rs
Supported by:
The authors gratefully acknowledge the funding by the Ministry of Education and Science, the Republic of Serbia for Registration (No. 451-03-68/2022-14/200052). The author is also grateful to Marjan Gorišek, Jim Fleming and Prof. Nicola Bolton for their overall support and generosity.

Theoretical and experimental assessment of a novel method to establish the complete measurement range of the calorimeter and its limit of detection and quantification

Vesna Krsti?

af005 Mining and Metallurgy Institute Bor, Zeleni Bulevar 35, 19210 Bor, Serbia;
af010. University of Belgrade, Technical Faculty Bor, VJ 12, 19210 Bor, Republik of Serbia

通讯作者: Vesna Krsti?,E-mail:vesna.krstic@irmbor.co.rs
基金资助:
The authors gratefully acknowledge the funding by the Ministry of Education and Science, the Republic of Serbia for Registration (No. 451-03-68/2022-14/200052). The author is also grateful to Marjan Gorišek, Jim Fleming and Prof. Nicola Bolton for their overall support and generosity.

Abstract

Abstract: For determining the accuracy of a calorimeter over the instrument’s entire measuring range, a novel method has been established. For this new approach, (a) benzoic acid (C₆H₅CO₂H) as a certified reference material (CRM), (b) SiO₂ and (c) a mixture of CRM benzoic acid and SiO₂ have been used. To illustrate the essential difference between 1) the novel analytical method for control of the entire measurement range and 2) the calorimeter calibration, both applications of benzoic acid (BA) have been demonstrated. An experimental result showed that BA was successfully used to check the whole calorimeter measurement range. The results also showed that the same new method was successfully applied to determine the limit of detection and quantification. A new instrument testing process and a new measurement technique have thus been established. In this way, the cost of using CRM to control the accuracy of measuring the entire measuring range of the calorimeter, as shown in this paper, is minimized. The requirements of the ISO/IEC 17025:2017 standard are satisfied. ISO/IEC 17025:2017, together with ISO 9001:2015 (quality management systems), ISO 14001:2015 (relate to environmental protection) and ISO 45001:2018 (occupational safety), constitute an integrated quality system by which a testing laboratory may also accredit.

Key words: Benzoic acid, Certified reference material, The limit of detection/quantification, Measurement range, Quality control, Calorimeter, Environmental protection

摘要： For determining the accuracy of a calorimeter over the instrument’s entire measuring range, a novel method has been established. For this new approach, (a) benzoic acid (C₆H₅CO₂H) as a certified reference material (CRM), (b) SiO₂ and (c) a mixture of CRM benzoic acid and SiO₂ have been used. To illustrate the essential difference between 1) the novel analytical method for control of the entire measurement range and 2) the calorimeter calibration, both applications of benzoic acid (BA) have been demonstrated. An experimental result showed that BA was successfully used to check the whole calorimeter measurement range. The results also showed that the same new method was successfully applied to determine the limit of detection and quantification. A new instrument testing process and a new measurement technique have thus been established. In this way, the cost of using CRM to control the accuracy of measuring the entire measuring range of the calorimeter, as shown in this paper, is minimized. The requirements of the ISO/IEC 17025:2017 standard are satisfied. ISO/IEC 17025:2017, together with ISO 9001:2015 (quality management systems), ISO 14001:2015 (relate to environmental protection) and ISO 45001:2018 (occupational safety), constitute an integrated quality system by which a testing laboratory may also accredit.

关键词: Benzoic acid, Certified reference material, The limit of detection/quantification, Measurement range, Quality control, Calorimeter, Environmental protection

Vesna Krsti?. Theoretical and experimental assessment of a novel method to establish the complete measurement range of the calorimeter and its limit of detection and quantification[J]. Chinese Journal of Chemical Engineering, 2022, 44(4): 466-473.

References

[1] K.J. Laider, The World of Physical Chemistry, ed., Oxford University Press, Oxford, UK, 1993
[2] C. Taylor, Differential scanning calorimetry and fibre analysis, Trac Trends Anal. Chem. 2 (4) (1983) 88-92
[3] S.V. Meschel, A brief history of heat measurements by calorimetry with emphasis on the thermochemistry of metallic and metal-nonmetal compounds, Calphad 68 (2020) 101714
[4] R.H. Narron, T. Winowiski, J. Gargulak, K. Hendricks, Fiber-first approach to isothermal calorimetry for quantification of self-heating reduction by antioxidants for the wood pelleting industry, Fuel 274 (2020) 117788
[5] L. Temdrara, A. Khelifi, A. Addoun, N. Spahis, Study of the adsorption properties of lignocellulosic material activated chemically by gas adsorption and immersion calorimetry, Desalination 223 (1-3) (2008) 274-282
[6] O. Adriani, CaloCube-a highly segmented calorimeter for space based experiment, Methods Phys. Res. Sect. A 824 (2016) 609-613
[7] E. Vannuccini, O. Adriani, A. Agnesi, S. Albergo, L. Auditore, A. Basti, E. Berti, G. Bigongiari, L. Bonechi, S. Bonechii, M. Bongi, V. Bonvicini, S. Bottai, P. Brogi, G. Carotenuto, G. Castellini, P.W. Cattaneo, R. D'Alessandro, S. Detti, M. Fasoli, N. Finetti, P. Lenzi, P. Maestro, P.S. Marrocchesi, M. Miritello, N. Mori, G. Orzan, M. Olmi, L. Pacini, P. Papini, M.G. Pellegriti, F. Pirzio, A. Rappoldi, S. Ricciarini, P. Spillantini, O. Starodubtsev, F. Stolzi, J.E. Suh, A. Sulaj, A. Tiberio, A. Tricomi, A. Trifiro, M. Trimarchi, A. Vedda, G. Zampa, N. Zampa, B. Zerbo, CaloCube:A new-concept calorimeter for the detection of high-energy cosmic rays in space, Nucl. Instrum. Meth. A 845 (2017) 421-424
[8] International Standards Organization, ISO/IEC 17025:2017. General Requirements for the Competence of Testing and Calibration Laboratories, ISO, Geneva, Switzerland, 2017.
[9] B.M. Simonet, Quality control in qualitative analysis, Trac Trends Anal. Chem. 24 (6) (2005) 525-531
[10] M. Jovanovic, Support of laboratory accreditation in Central and Eastern Europe by preliminary assessment, Accreditation Qual. Assur. 9 (1-2) (2004) 96-98
[11] M. Jovanović, J. Jovanovic, Laboratory authorization versus accreditation in transitional economies:case study of Serbia, Accreditation Qual. Assur. 10 (12) (2006) 672-680
[12] International Standards Organization, ISO 14001:2015. Environmental management systems-Requirements with guidance for use, ISO, Geneva, Switzerland, 2015
[13] International Standards Organization, ISO 45001:2018. Occupational health and safety management systems-Requirements with guidance for use, ISO, Geneva, Switzerland, 2018.
[14] International Standards Organization, ISO 9001:2015. Quality management systems-Requirements, ISO, Geneva, Switzerland, 2015.
[15] M.A.V. Ribeiro da Silva, G. Pilcher, L.M.N.B.F. Santos, L.M.S.S. Lima, Calibration and test of an aneroid mini-bomb combustion calorimeter, J. Chem. Thermodyn. 39 (5) (2007) 689-697
[16] X.J. Ge, D.X. Li, L. Chen, R.X. Liu, G.L. Ge, A practical method to evaluate major statistical errors in isothermal titration calorimetry, Thermochimica Acta 689 (2020) 178626
[17] International Organization for Standardization, ISO 1928:2009, Solid mineral fuels-Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value, ISO, Geneva, Switzerland, 2009.
[18] ASTM D5865/D5865M-19, Standard test method for gross calorific value of coal and coke, ASTM International, West Conshohocken, PA, 2019, www.astm.org.
[19] https://chem.libretexts.org/@go/page/38089
[20] Operating Instructions, 71 900 01a IKA WERKE, IKA Calorimeter System, C5000 control, C5000 duo-control, Vers. 10 04.07, Reg.-No. 4343-01 2007. http://giangarloscientific.com/analytical/former%20ika/C5000_Manual.pdf.
[21] V. Krstić, B. Blagojević, L. Gomidželović, E. Požega, J. Petrović, B. Trumić, Limit of quantification and quality control in calorimetry, Chem. Ind. 65 (2011) 93-97. (in Serbian)
[22] V. Krstic, B. Trumic, M. Bugarin, G. Stojanovic, Estimation the measurement uncertainty of physico-chemical properties of coals according to ISO 17025, Min. Metall. Eng. Bor (4) (2013) 141-156
[23] S.K. Kimothi, The uncertainly of measurements, physical and chemical impact and analysis, ed., ASQ Quality Press, Milwaukee, USA, 2002
[24] International Organization for Standardization. ISO 11843-1:1997. Capability of Detection. Part 1:Terms and Definitions. ISO, Geneva, 1997.
[25] Araujo P, Key aspects of analytical method validation and linearity evaluation, J Chromatogr B Analyt Technol Biomed Life Sci 877 (23) (2009) 2224-2234
[26] M.E. Swartz, I.S. Krull, Analytical Method Development and Validation[M]. CRC Press, Boca Raton, FL,USA 2018
[27] B. Boulanger, P. Chiap, W. Dewe, J. Crommen, P. Hubert, An analysis of the SFSTP guide on validation of chromatographic bioanalytical methods:progress and limitations, J Pharm Biomed Anal 32 (4-5) (2003) 753-765
[28] P. Hubert, P. Chiap, J. Crommen, B. Boulanger, E. Chapuzet, N. Mercier, S. Bervoas-Martin, P. Chevalier, D. Grandjean, P. Lagorce, M. Lallier, M.C. Laparra, M. Laurentie, J.C. Nivet, The SFSTP guide on the validation of chromatographic methods for drug bioanalysis:from the Washington Conference to the laboratory, Anal. Chimica Acta 391 (2) (1999) 135-148
[29] J. Carlson, A. Wysoczanski, E. Voigtman, Limits of quantitation-Yet another suggestion, Spectrochimica Acta Part B:At. Spectrosc. 96 (2014) 69-73

Theoretical and experimental assessment of a novel method to establish the complete measurement range of the calorimeter and its limit of detection and quantification

Theoretical and experimental assessment of a novel method to establish the complete measurement range of the calorimeter and its limit of detection and quantification

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 10

Recommended Articles

Metrics

Comments

[1]	Xuexi Chen, Mei Wan, Ming Gao, Yanxia Wang, Deqi Yi. Improved flame resistance properties of unsaturated polyester resin with TiO₂-M_XO_Y solid superacid [J]. Chinese Journal of Chemical Engineering, 2020, 28(9): 2474-2482.
[2]	Jie Chen, Bo Fang, Hao Jin, Licheng Yu, Meng Tian, Kejing Li, Leiping Jin, Mo Yang. Photorheologically reversible micelle composed of polymerizable cationic surfactant and 4-phenylazo benzoic acid [J]. , 2016, 24(2): 289-292.
[3]	WEI Tongtong, JIANG Huiling. Venting Design for Di-tert-butyl Peroxide Runaway Reaction Based on Accelerating Rate Calorimeter Test [J]. Chin.J.Chem.Eng., 2012, 20(4): 710-714.
[4]	TAMILARASAN Rengasamy, ANAND PRABU Arun, KAP JIN Kim, DHAR-MENDIRA KUMAR Mahendradas. Effect of Dissolved Cadmium Chloride and Ammonium Chloride Salts on the Enthalpy of Mixing of the Methanol+Benzene System at 303.15 K [J]. , 2010, 18(6): 995-999.
[5]	XU Jiao, HE Jie, ZHANG Weijiang, YANG Tao, JIAO Shujun, HU Xuedong. Development on the Technique of Total Recovery of Benzoic Acid Residue [J]. , 2009, 17(4): 608-612.
[6]	TANG Shengwei, SHEN Wei, LIANG Bin. Influences of the [Co²⁺]/[Co³⁺] Ratio on the Process of Liquid-phase Oxidation of Toluene by Air [J]. , 2009, 17(4): 613-617.
[7]	ZHANG Yukun, LI Chufu, HE Xiaorong, CHEN Bingzhen. Simulation and Optimization in the Process of Toluene Liquid-phase Catalytic Oxidation [J]. Chin.J.Chem.Eng., 2008, 16(1): 36-38.
[8]	JIA Qingzhu, MA Peisheng, MA Shaona, WANG Chang. Solid-liquid equilibria of Benzoic acid derivatives in 1-octanol [J]. , 2007, 15(5): 710-714.
[9]	LIANG Jun, QIAN Jixin. Multivariate Statistical Process Monitoring and Control: Recent Developments and Applications to Chemical Industry [J]. , 2003, 11(2): 191-203.
[10]	ZHANG Jin, DAI Youyuan. Distribution Behavior of Aminobenzoic Acid by Extraction with Di(2-ethylhexyl)phosphoric Acid [J]. , 2000, 8(4): 300-303.