Adsorbents for Expanded Bed Adsorption:Preparation and Functionalization

Abstract

Abstract: Expanded bed adsorption(EBA),a promising and practical separation technique,has been widely studied in the past two decades.The development of adsorbents for EBA process is a challenging course,with the special design and preparation according to the target molecules and specific expanded bed systems.Many types of supporting matrices for expanded bed adsorbents have been developed,and their preparation methods are being consummated gradually.These matrices are activated and then coupled with ligands to form functionalized adsorbents,including ion-exchange adsorbents,affinity adsorbents,mixed mode adsorbents,hydrophobic charge induction chromatography adsorbents and others.In this review,the preparation of the matrices for EBA process is summa-rized,and the coupling of ligands to the matrices to prepare functionalized adsorbents is discussed as well.

Key words: expanded bed adsorption, matrix, preparation, functionalized adsorbent, chromatography, separation

摘要： Expanded bed adsorption(EBA),a promising and practical separation technique,has been widely studied in the past two decades.The development of adsorbents for EBA process is a challenging course,with the special design and preparation according to the target molecules and specific expanded bed systems.Many types of supporting matrices for expanded bed adsorbents have been developed,and their preparation methods are being consummated gradually.These matrices are activated and then coupled with ligands to form functionalized adsorbents,including ion-exchange adsorbents,affinity adsorbents,mixed mode adsorbents,hydrophobic charge induction chromatography adsorbents and others.In this review,the preparation of the matrices for EBA process is summa-rized,and the coupling of ligands to the matrices to prepare functionalized adsorbents is discussed as well.

关键词: expanded bed adsorption, matrix, preparation, functionalized adsorbent, chromatography, separation

ZHAO Jun, YAO Shanjing, LIN Dongqiang. Adsorbents for Expanded Bed Adsorption:Preparation and Functionalization[J]. , 2009, 17(4): 678-687.

赵珺, 姚善泾, 林东强. Adsorbents for Expanded Bed Adsorption:Preparation and Functionalization[J]. , 2009, 17(4): 678-687.

References

1 Anspach,F.B.,Curbelo,D.,Hartmann,R.,Garke,G.,Deckwer,W.D., “Expanded-bed chromatography in primary protein purification”,J. Chromatogr.A,865(1/2),129-144(1999).
2 Chase,H.A.,“Purification of proteins by adsorption chromatography in expanded beds”,Trends Biotechnol.,12(8),296-303(1994).
3 Hjorth,R.,“Expanded-bed adsorption in industrial bioprocessing: Recent developments”,Trends Biotechnol.,15(6),230-235(1997).
4 Thömmes,J.,“Fluidized bed adsorption as a primary recovery step in protein purification”,Adv.Biochem.Eng.Biot.,58,185-230 (1997).
5 Pålsson,E.,Axelsson,A.,Larsson,P.O.,“Theories of chromatographic efficiency applied to expanded beds”,J.Chromatogr.A, 912,235-248(2001).
6 Hubbuch,J.,Thömmes,J.,Kula,M.R.,“Biochemical engineering aspects of expanded bed adsorption”,Adv.Biochem.Eng.Biot.,92, 101-123(2005).
7 Voute,N.,Boschetti,E.,“Highly dense beaded sorbents suitable for fluidized bed applications”,Bioseparation,8,115-120(1999).
8 Pai,A.,Gondkar,S.,Lali,A.,“Enhanced performance of expandedbed chromatography on rigid superporous adsorbent matrix”,J. Chromatogr.A,867,113-130(2000).
9 Pålsson,E.,Gustavsson,P.E.,Larsson,P.O.,“Pellicular expanded bed matrix suitable for high flow rates”,J.Chromatogr.A,878, 17-25(2000).
10 Al-Dibouni,M.R.,Garside,J.,“Particle mixing and classification in liquid fluidized beds”,Trans.I.Chem.E.,57,94-103(1979).
11 Lei,Y.L.,Yao,S.J.,Liu,Z.Z.,Zhu,Z.Q.,“Advances in matrices for expanded bed adsorption”,Journal of Functional Polymers,15(2), 219-224(2002).(in Chinese)
12 Xia,H.F.,Lin,D.Q.,Yao,S.J.,“Evaluation of new high-density ion exchange adsorbents for expanded bed adsorption chromatography”, J.Chromatogr.A,1145,58-66(2007).
13 Miao,Z.J.,Lin,D.Q.,Yao,S.J.,“Preparation and characterization of cellulose-stainless steel powder composite particles customized for expanded bed application”,Ind.Eng.Chem.Res.,44(22), 8218-8224(2005).
14 Jahanshahi,M.,Partida-Martinezb,L.,Hajizadeha,S.,“Preparation and evaluation of polymer-coated adsorbents for the expanded bed recovery of protein products from particulate feedstocks”,J.Chromatogr.A,1203,13-20(2008).
15 McCreath,G.E.,Chase,H.A.,Owen,R.O.,“Expanded bed affinity chromatography of dehydrogenases from Baker's yeast using dye-ligand perfluoropolymer supports”,Biotechnol.Bioeng.,48, 341-354(1995).
16 Lei,Y.L.,Lin,D.Q.,Yao,S.J.,Zhu,Z.Q.,“Preparation and characterization of titanium oxide-densified cellulose beads for expanded bed adsorption”,J.Appl.Polym.Sci.,90,2848-2854(2003).
17 Xia,H.F.,Lin,D.Q.,Yao,S.J.,“Spherical cellulose-nickel powder composite matrix customized for expanded bed application”,J.Appl. Polym.Sci.,104,740-747(2007). 18 Lei,Y.L.,“Preparation of spherical cellulose/TiO₂ composite adsorbent for expanded bed adsorption and its application
to purification of proteins”,Ph.D.Thesis,Zhejiang Univ.,China(2003).(in Chinese)
19 Rodrigues,A.E.,Lu,Z.P.,Loureiro,J.M.,“Residence time distribution of inert and linearly adsorbed species in a fixed bed containing ‘large-pore'supports:applications in separation engineering”,Chem. Eng.Sci.,46(11),2765-2773(1991).
20 Xia,H.F.,Lin,D.Q.,Yao,S.J.,“Preparation and characterization of macroporous cellulose–tungsten carbide composite beads for expanded bed applications”,J.Chromatogr.A,1175,55-62(2007).
21 Xia,H.F.,Lin,D.Q.,Yao,S.J.,“Chromatographic performance of macroporous cellulose-tungsten carbide composite beads as anion-exchanger for expanded bed adsorption at high fluid velocity”,J. Chromatogr.A,1195,60-66(2008).
22 Zhang,M.L.,Sun,Y.,“Cooperation of solid granule and solvent as porogenic agents.Novel porogenic mode of biporous media for protein chromatography”,J.Chromatogr.A,922,77-86(2001).
23 Shi,Q.H.,Zhou,X.,Sun,Y.,“A novel superporous agarose medium for high-speed protein chromatography”,Biotechnol.Bioeng.,92, 643-651(2005).
24 Wang,D.M.,Hao,G.,Shi,Q.H.,Sun,Y.,“Fabrication and characterization of superporous cellulose bead for high-speed protein chromatography”,J.Chromatogr.A,1146,32-40(2007).
25 Thömmes,J.,Halfar,M.,Lenz,S.,Kula,M.R.,“Purification of monoclonal antibodies from whole hybridoma fermentation broth by fluidized bed adsorption”,Biotechnol.Bioeng.,45,205-211(1995).
26 Voute,N.,Bataille,D.,Girot,P.,Boschetti,E.,“Characterization of very dense mineral oxide-gel composites for fluidized-bed adsorption of biomolecules”,Bioseparation,8,121-129(1999).
27 Griffith,C.M.,Morris,J.,Robichaud,M.,Annen,M.J.,McCormick, A.V.,Flickinger,M.C.,“Fluidization characteristics of and protein adsorption on fluoride-modified porous zirconium oxide particles”,J. Chromatogr.A,776,179-195(1997).
28 Mullick,A.,Griffith,C.M.,Flickinger,M.C.,“Expanded and packed bed albumin adsorption on fluoride modified zirconia”,Biotechnol. Bioeng.,60(3),333-340(1998).
29 Lihme,A.,Zafirakos,E.,Hansen,M.,Olander,M.,“Simplified and more robust EBA processes by elution in expanded bed mode”,Bioseparation,8,93-97(1999).
30 Pall Corporation,“DEAE&SP Spherodex ? LS silica/dextran composite ion exchangers for liquid chromatography of biologicals”, http://www.pall.com/pdf/35753.pdf.
31 Tong,X.D.,Sun,Y.,“Nd-Fe-B alloy-densified agarose gel for expanded bed adsorption of proteins”,J.Chromatogr.A,943,63-75 (2001).
32 Jahanshahi,M.,Sun,Y.,Santos,E.,Pacek,A.,Franco,T.T.,Nienow, A.,Lyddiatt A.,“Operational intensification by direct product sequestration from cell disruptates:application of a pellicular adsorbent in a mechanically integrated disruption-fluidised bed adsorption process”,Biotechnol.Bioeng.,80(2),201-212(2002).
33 Amersham Pharmacia Biotech.,“Expanded bed adsorption-principles and methods”,Code No.18-1124-26,Uppsala,Sweden(1998).
34 Yun,J.X.,Lin,D.Q.,Lu,M.H.,Zhong,L.N.,Yao,S.J.,“Measurement and modeling of axial distribution of adsorbent particles in expanded bed:taking into account the particle density difference”, Chem.Eng.Sci.,59,5873-5881(2004).
35 Dowding,P.J.,Vincent,B.,“Suspension polymerisation to form polymer beads”,Colloid.Surface.A,161,259-269(2000).
36 Dawkins,J.V.,“Aqueous suspension polymerizations”,In:Comprehensive Polymer Science,The Synthesis,Characterization and Applications of Polymers,IV,Pergamon,Oxford,231-241(1989).
37 Pan,Z.R.,Weng,Z.X.,Huang,Z.M.,Suspension Polymerization, Chemical Industry Press,Beijing,China(1997).(in Chinese)
38 Kumaran,S.,Chantaiah,B.,Rao,T.S.,“Effect of niobium and aluminium additions in TiAl prealloyed powders during high-energy ball milling”,Mater.Chem.Phys.,108,97-101(2008).
39 Ma,T.,Huang,Y.,Yang,J.L.,He,J.T.,Zhao,L.,“Preparation of spherical zirconia powder in microemulsion system and its densification behavior”,Mater.Design,25,515-519(2004).
40 Lee,M.H.,Tai,C.Y.,Lu,C.H.,“Synthesis of spherical zirconia by precipitation between two water/oil emulsions”,J.Eur.Ceram.Soc., 19,2593-2603(1999).
41 Robichaud,M.J.,Sathyagal,A.N.,Carr,P.W.,McCormick,A.V., Flickinger,M.C.,“An improved oil emulsion synthesis method for large,porous zirconia particles for packed-or fluidized-bed protein chromatography”,Sep.Sci.Technol.,32(15),2547-2559(1997).
42 Morimoto,T.,Kittaka,S.,“Spherical particles and their surface properties:II.Preparation of spherical particles of titanium dioxide”, J.Colloid Interf.Sci.,78(2),356-361(1980).
43 Li,Y.L.,Ishigaki,T.,“Synthesis of crystalline micron spheres of titanium dioxide by thermal plasma oxidation of titanium carbide”, Chem.Mater.,13,1577-1584(2001).
44 Pai,A.,Gondkar,S.,Sundaram,S.,Lali,A.,“Expanded bed adsorption on supermacroporous cross-linked cellulose matrix”,Bioseparation,8,131-138(1999).
45 Zhou,X.,Shi,Q.H.,Bai,S.,Sun,Y.,“Dense pellicular agarose-glass beads for expanded bed application:Fabrication and characterization for effective protein adsorption”,Biochem.Eng.J.,18,81-88 (2004).
46 Jahanshahi,M.,Pacek,A.W.,Nienow,A.W.,Lyddiatt,A.,“Fabrication by three-phase emulsification of pellicular adsorbents customised for liquid fluidised bed adsorption of bioproducts”,J.Chem. Technol.Biotechnol.,78,1111-1120(2003).
47 Jahanshahi,M.,Zhang,Z.,Lyddiatt,A.,“Subtractive chromatography for purification and recovery of nano-bioproducts”,IEE P. Nanobiotechnol.,152(3),121-126(2005).
48Štamberg,J.,“Bead cellulose”,Sep.Purif.Methods,17(2),155-183 (1988).
49 Arthur,J.C.Jr.,“Chemical modification of cellulose and its derivatives”,In:Comprehensive Polymer Science,The Synthesis,Characterization and Applications of Polymers,VI,Pergamon,Oxford, 49-80(1989).
50 Kuga,S.,“New cellulose gel for chromatography”,J.Chromatogr., 195,221-230(1980).
51 Fink,H.P.,Weigel,P.,Purz,H.J.,Ganster,J.,“Structure formation of regenerated cellulose materials from NMMO-solutions”,Prog.Polym.Sci.,26,1473-1524(2001).
52 Dogan,H.,Hilmioglu,N.D.,“Dissolution of cellulose with NMMO by microware heating”,Carbohyd.Polym.,75,90-94(2009).
53 Axén,R.,Drevin,H.,Carlsson,J.,“Preparation of modified agarose gels containing thiol groups”,Acta Chem.Scand.B,29,471-474 (1975).
54 Scoble,J.A.,Scopes,R.K.,“Assay for determining the number of reactive groups on gels used in affinity chromatography and its application to the optimisation of the epichlorohydrin and divinylsulfoneactivation reactions”,J.Chromatogr.A,752,67-76(1996).
55 Sundberg,L.,Porath,J.,“Preparation of adsorbents for biospecific affinity chromatography(I)Attachment of group-containing ligands to insoluble polymers by means of bifunctional oxiranes”,J.Chromatogr.,90(1),87-98(1974).
56 Burton,S.C.,Harding,D.R.K.,“Bifunctional etherification of a bead cellulose for ligand attachment with allyl bromide and allyl glycidyl ether”,J.Chromatogr.A,775,29-38(1997).
57 Burton,S.C.,Harding,D.R.K.,“High-density ligand attachment to brominated allyl matrices and application to mixed mode chromatography of chymosin”,J.Chromatogr.A,775,39-50(1997).
58 Burton,S.C.,Harding,D.R.K.,“Preparation of chromatographic matrices by free radical addition ligands attachment to allyl groups”, J.Chromatogr.A,796,273-282(1998).
59 Noel,R.J.,O'Hare,W.T.,Street,G.,“Thiophilic nature of divinylsulphone cross-linked agarose”,J.Chromatogr.A,734,241-246 (1996).
60 Scoble,J.A.,Scopes,R.K.,“Ligand structure of the divinylsulfone-based T-gel”,J.Chromatogr.A,787,47-54(1997).
61 Lei,Y.L.,Lin,D.Q.,Yao,S.J.,Zhu,Z.Q.,“Preparation of an anion exchanger based on TiO₂-densified cellulose beads for expanded bed adsorption”,React.Funct.Polym.,62,169-177(2005).
62 Dainiak,M.B.,Galaev,I.Y.,Mattiasson,B.,“Polyelectrolyte-coated ion exchangers for cell-resistant expanded bed adsorption”,Biotechnol.Progr.,18,815-820(2002).
3 Linhult,M.,Gülich,S.,Hober,S.,“Affinity ligands for industrial protein purification”,Protein Peptide Lett.,12,305-310(2005).
64 Li,J.H.,Feng,J.,Dang,Q.Q.,Qiao,Y.T.,Zhao,J.X.,Zhang,S.H., Sun,H.W.,Wen,X.,Yuan,Z.,“Affinity adsorption mechanism studies of adsorbents for oligopeptides using model polymer”, Polymer,50,1602-1608(2009).
65 He,L.Z.,Gan,Y.R.,Sun,Y.,“Adsorption-desorption of BSA to highly-substituted dye-ligand adsorbent:quantitative study of the effect of ionic strength”,Bioprocess.Eng.,17,301-305(1997).
66 Thömmes,J.,Bader,A.,Halfar,M.,Karau,A.,Kula,M.R.,“Isolation of monoclonal antibodies from cell containing hybridoma broth using a protein A coated adsorbent in expanded beds”,J.Chromatogr.A,752,111-122(1996).
67 Nayak,D.P.,Ponrathnam,S.,Rajan,C.R.,“Macroporous copolymer matrix IV.Expanded bed adsorption application”,J.Chromatogr.A, 922,63-76(2001).
68 Hamilton,G.E.,Luechau,F.,Burton,S.C.,Lyddiatt,A.,“Development of a mixed mode adsorption process for the direct product sequestration of an extracellular protease from microbial batch cultures”,J.Biotechnol.,79,103-115(2000).
69 Gao,D.,Lin,D.Q.,Yao,S.J.,“Protein adsorption kinetics of mixed-mode adsorbent with benzylamine as functional ligand”, Chem.Eng.Sci.,61,7260-7268(2006).
70 Gao,D.,Lin,D.Q.,Yao,S.J.,“Mechanistic analysis on the effects of salt concentration and pH on protein adsorption onto a mixed-mode adsorbent with cation ligand”,J.Chromatogr.B,859,16-23(2007).
71 Burton,S.C.,Harding,D.R.K.,“Salt-independent adsorption chromatography:new broad-spectrum affinity methods for protein capture”,J.Biochem.Bioph.Methods,49,275-287(2001).
72 Lu,M.H.,Lin,D.Q.,Wu,Y.C.,Yun,J.X.,Mei,L.H.,Yao,S.J., “Separation of nattokinase from Bacillus subtilis fermentation broth by expanded bed adsorption with mixed-mode adsorbent”,Biotechnol.Bioproc.E.,10,128-135(2005).
73 Burton,S.C.,haggarty,N.W.,Harding,D.R.K.,“One step purification of chymosin by mixed mode chromatography”,Biotechnol. Bioeng.,56,45-55(1997).
74 Gao,D.,Yao,S.J.,Lin,D.Q.,“Preparation and adsorption behavior of a cellulose-based,mixed-mode adsorbent with a benzylamine ligand for expanded bed applications”,J.Appl.Polym.Sci.,107, 674-682(2008).
75 Gao,D.,Lin,D.Q.,Yao,S.J.,“Patch controlled protein adsorption in mixed-mode chromatography with benzylamine as functional ligand”,Biochem.Eng.J.,38,355-361(2008).
76 Charoenrat,T.,Ketudat-Cairns,M.,Jahic,M.,Enfors,S.O.,Veide, A.,“Recovery of recombinantβ-glucosidase by expanded bed adsorption from Pichia pastoris high-cell-density culture broth”,J. Biotechnol.,122,86-98(2006).
77 Boschetti,E.,“Antibody separation by hydrophobic charge induction chromatography”,Trends Biotechnol.,20(8),333-337(2002).
78 Ghose,S.,Hubbard,B.,Cramer,S.M.,“Protein interactions in hydrophobic charge induction chromatography(HCIC)”,Biotechnol. Progr.,21,498-508(2005).
79 Burton,S.C.,Harding,D.R.K.,“Hydrophobic charge induction chromatography:salt independent protein adsorption and facile elution with aqueous buffers”,J.Chromatogr.A,814,71-81(1998).
80 Xia,H.F.,Lin,D.Q.,Wang,L.P.,Chen,Z.J.,Yao,S.J.,“Preparation and evaluation of cellulose adsorbents for hydrophobic charge induction chromatography”,Ind.Eng.Chem.Res.,47(23),9566-9572 (2008).
81 Xia,H.F.,“Fundamental research on the functionalization and application of cellulose-based composite matrix for chromatography”, Ph.D.Thesis,Zhejiang Univ.,China(2008).(in Chinese)

[1]	Pan Wang, Mengdei Zhou, Zhuangxin Wei, Lu Liu, Tao Cheng, Xiaohua Tian, Jianming Pan. Preparation of bowl-shaped polydopamine surface imprinted polymer composite adsorbent for specific separation of 2′-deoxyadenosine [J]. Chinese Journal of Chemical Engineering, 2023, 60(8): 69-79.
[2]	Wenwen Zhang, Zhigang Xue, Liyun Cui, Haoliang Gao, Di Zhao, Rongfei Zhou, Weihong Xing. Synthesis of an IMF zeolite membrane for the separation of xylene isomer [J]. Chinese Journal of Chemical Engineering, 2023, 60(8): 205-211.
[3]	Hammad Saulat, Jianhua Yang, Tao Yan, Waseem Raza, Wensen Song, Gaohong He. Tungsten incorporated mobil-type eleven zeolite membranes: Facile synthesis and tuneable wettability for highly efficient separation of oil/water mixtures [J]. Chinese Journal of Chemical Engineering, 2023, 60(8): 242-252.
[4]	Yuan Liu, Hanting Xiong, Jingwen Chen, Shixia Chen, Zhenyu Zhou, Zheling Zeng, Shuguang Deng, Jun Wang. One-step ethylene separation from ternary C₂ hydrocarbon mixture with a robust zirconium metal-organic framework [J]. Chinese Journal of Chemical Engineering, 2023, 59(7): 9-15.
[5]	Borui Liu, Tao Zhang, Yi Zheng, Kailong Li, Hui Pan, Hao Ling. A dynamic control structure of liquid-only transfer stream distillation column [J]. Chinese Journal of Chemical Engineering, 2023, 59(7): 135-145.
[6]	Chen Chen, Qiong Tang, Hong Xu, Mingxing Tang, Xuekuan Li, Lei Liu, Jinxiang Dong. Alkyl-tetralin base oils synthesized from coal-based chemicals and evaluation of their lubricating properties [J]. Chinese Journal of Chemical Engineering, 2023, 58(6): 20-28.
[7]	Yafei Su, Xuke Zhang, Hui Li, Donglai Peng, Yatao Zhang. In-situ incorporation of halloysite nanotubes with 2D zeolitic imidazolate framework-L based membrane for dye/salt separation [J]. Chinese Journal of Chemical Engineering, 2023, 58(6): 103-111.
[8]	Shuangtai Liu, Lei He, Qiuxiang Yao, Xi Li, Linyang Wang, Jing Wang, Ming Sun, Xiaoxun Ma. Separation and analysis of six fractions in low temperature coal tar by column chromatography [J]. Chinese Journal of Chemical Engineering, 2023, 58(6): 256-265.
[9]	Wende Tian, Jiawei Zhang, Zhe Cui, Haoran Zhang, Bin Liu. Microscopic mechanism study and process optimization of dimethyl carbonate production coupled biomass chemical looping gasification system [J]. Chinese Journal of Chemical Engineering, 2023, 58(6): 291-305.
[10]	Hui Yi Leong, Xiao-Qian Fu, Xiang-Yu Liu, Shan-Jing Yao, Dong-Qiang Lin. Characterisation and separation of infectious bursal disease virus-like particles using aqueous two-phase systems [J]. Chinese Journal of Chemical Engineering, 2023, 57(5): 72-78.
[11]	Yujia Cui, Zhiqiang Tan, Yanan Wang, Shuxian Shi, Xiaonong Chen. One-step crosslinking preparation of tannic acid particles for the adsorption and separation of cationic dyes [J]. Chinese Journal of Chemical Engineering, 2023, 57(5): 309-318.
[12]	Feng Pan, Sugang Ma, Yu Ge, Chuanlin Fan, Qingshan Zhu. Fluidization thermal decomposition of sodium fluosilicate [J]. Chinese Journal of Chemical Engineering, 2023, 57(5): 329-337.
[13]	Jingran Liu, Yue Wu, Jie Tang, Tao Wang, Feng Ni, Qiumin Wu, Xijiao Yang, Ayyaz Ahmad, Naveed Ramzan, Yisheng Xu. Polymeric assembled nanoparticles through kinetic stabilization by confined impingement jets dilution mixer for fluorescence switching imaging [J]. Chinese Journal of Chemical Engineering, 2023, 56(4): 89-96.
[14]	Chen Chen, Yujie Liu, Qiong Tang, Hong Xu, Mingxing Tang, Xuekuan Li, Lei Liu, Jinxiang Dong. Tribological and rheological performance of lithium grease with poly-α-olefin and alkyl-tetralin as base oils [J]. Chinese Journal of Chemical Engineering, 2023, 56(4): 180-192.
[15]	Xingzhong Li, Kunlin Yu, Zibo He, Bo Liu, Rongfei Zhou, Weihong Xing. Improved SSZ-13 thin membranes fabricated by seeded-gel approach for efficient CO₂ capture [J]. Chinese Journal of Chemical Engineering, 2023, 56(4): 273-280.