Modelling of a post-combustion carbon dioxide capture absorber using potassium carbonate solvent in Aspen Custom Modeller

doi:10.1016/j.cjche.2018.06.005

Abstract

Abstract: The process models for an equilibrium CO₂ absorber and a rate based CO₂ absorber using potassium carbonate (K₂CO₃) solvents were developed in Aspen Custom Modeller (ACM) to remove CO₂ from a flue gas. The process model utilised the Electrolyte Non-Random Two Liquid (ENRTL) thermodynamic model and various packing correlations. The results from the ACM equilibrium model shows good agreement with an inbuilt Aspen Plus^® model when using the same input conditions. By further introducing a Murphree efficiency which is related to mass transfer and packing hydraulics, the equilibrium model can validate the experimental results from a pilot plant within a deviation of 10%. A more rigorous rate based model included mass and energy flux across the interface and the enhancement effect resulting from chemical reactions. The rate based model was validated using experimental data from pilot plants and was shown to predict the results to within 10%. A parametric sensitivity analysis showed that inlet flue gas flowrate and K₂CO₃ concentration in the lean solvent has significant impact on CO₂ recovery. Although both models can provide reasonable predictions based on pilot plant results, the rate based model is more advanced as it can explain mass and heat transfer, transport phenomena and chemical reactions occurring inside the absorber without introducing an empirical Murphree efficiency.

Key words: Equilibrium, Rate based, Modelling, Absorber, Potassium carbonate

摘要： The process models for an equilibrium CO₂ absorber and a rate based CO₂ absorber using potassium carbonate (K₂CO₃) solvents were developed in Aspen Custom Modeller (ACM) to remove CO₂ from a flue gas. The process model utilised the Electrolyte Non-Random Two Liquid (ENRTL) thermodynamic model and various packing correlations. The results from the ACM equilibrium model shows good agreement with an inbuilt Aspen Plus^® model when using the same input conditions. By further introducing a Murphree efficiency which is related to mass transfer and packing hydraulics, the equilibrium model can validate the experimental results from a pilot plant within a deviation of 10%. A more rigorous rate based model included mass and energy flux across the interface and the enhancement effect resulting from chemical reactions. The rate based model was validated using experimental data from pilot plants and was shown to predict the results to within 10%. A parametric sensitivity analysis showed that inlet flue gas flowrate and K₂CO₃ concentration in the lean solvent has significant impact on CO₂ recovery. Although both models can provide reasonable predictions based on pilot plant results, the rate based model is more advanced as it can explain mass and heat transfer, transport phenomena and chemical reactions occurring inside the absorber without introducing an empirical Murphree efficiency.

关键词: Equilibrium, Rate based, Modelling, Absorber, Potassium carbonate

Yue Wu, Fan Wu, Guoping Hu, Nouman R. Mirza, Geoffrey W. Stevens, Kathryn A. Mumford. Modelling of a post-combustion carbon dioxide capture absorber using potassium carbonate solvent in Aspen Custom Modeller[J]. Chin.J.Chem.Eng., 2018, 26(11): 2327-2336.

References

[1] B. Metz, O. Davidson, H.C. de Coninck, M. Loos, L.A. Meyer, IPCC Special Report on Carbon Dioxide Capture and Storage. Prepared by Working Group Ⅲ of the Intergovernmental Panel on Climate Change, Cambridge University Press, New York, 2005.

[2] R. Wengenmayr, T. Buhrke, Renewable Energy:Sustainable Concepts for the Energy Change, Wiley-VCH, Weinheim, 2013(c2013).

[3] C. Visual, CCS:A 2 Degree Solution, (United States) 2014.

[4] K.A. Mumford, Y. Wu, K.H. Smith, G.W. Stevens, Review of solvent based carbon-dioxide capture technologies, Front. Chem. Sci. Eng. 9(2015) 125-141.

[5] T.N.G. Borhani, A. Azarpour, V. Akbari, S.R. Wan Alwi, Z.A. Manan, CO₂ capture with potassium carbonate solutions:A state-of-the-art review, Int. J. Greenhouse Gas Control 41(2015) 142-162.

[6] A. Kothandaraman, Carbon dioxide capture by chemical absorption:A solvent comparison study, Carbon N. Y. (2010) 144-184.

[7] A. Cousins, L.T. Wardhaugh, P.H.M. Feron, Preliminary analysis of process flow sheet modifications for energy efficient CO₂ capture from flue gases using chemical absorption, Chem. Eng. Res. Des. 89(2011) 1237-1251.

[8] H. Thee, K.H. Smith, G. da Silva, S.E. Kentish, G.W. Stevens, Carbon dioxide absorption into unpromoted and borate-catalyzed potassium carbonate solutions, Chem. Eng. J. 181-182(2012) 694-701.

[9] C. Anderson, T. Harkin, M. Ho, K. Mumford, A. Qader, G. Stevens, B. Hooper, Developments in the CO2CRC UNO MK 3 process:A multi-component solvent process for large scale CO₂ capture, Energy Procedia 37(2013) 225-232.

[10] G. Hu, N.J. Nicholas, K.H. Smith, K.A. Mumford, S.E. Kentish, G.W. Stevens, Carbon dioxide absorption into promoted potassium carbonate solutions:A review, Int. J. Greenhouse Gas Control 53(2016) 28-40.

[11] I.P. Koronaki, L. Prentza, V. Papaefthimiou, Modeling of CO₂ capture via chemical absorption processes-An extensive literature review, Renew. Sust. Energ. Rev. 50(2015) 547-566.

[12] A. Lee, M. Wolf, N. Kromer, K.A. Mumford, N.J. Nicholas, S.E. Kentish, G.W. Stevens, A study of the vapour-liquid equilibrium of CO₂ in mixed solutions of potassium carbonate and potassium glycinate, Int. J. Greenhouse Gas Control 36(2015) 27-33.

[13] A. Lee, K.A. Mumford, Y. Wu, N. Nicholas, G.W. Stevens, Understanding the vapour-liquid equilibrium of CO₂ in mixed solutions of potassium carbonate and potassium glycinate, Int. J. Greenhouse Gas Control 47(2016) 303-309.

[14] M.D. Hilliard, A Predictive Thermodynamic Model for an Aqueous Blend of Potassium Carbonate, Piperazine, and Monoethanolamine for Carbon Dioxide Capture From Flue Gas, (Ph.D. Thesis) The University of Texas at Austin, 2008.

[15] K.A. Mumford, K.H. Smith, C.J. Anderson, S. Shen, W. Tao, Y.A. Suryaputradinata, A. Qader, B. Hooper, R.A. Innocenzi, S.E. Kentish, G.W. Stevens, Post-combustion capture of CO₂:Results from the solvent absorption capture plant at hazelwood power station using potassium carbonate solvent, Energy and Fuels 2012, pp. 138-146.

[16] K.H. Smith, C.J. Anderson, W. Tao, K. Endo, K.A. Mumford, S.E. Kentish, A. Qader, B. Hooper, G.W. Stevens, Pre-combustion capture of CO₂-Results from solvent absorption pilot plant trials using 30 wt% potassium carbonate and boric acid promoted potassium carbonate solvent, Int. J. Greenhouse Gas Control 10(2012) 64-73.

[17] T.N.G. Borhani, V. Akbari, M. Afkhamipour, M.K.A. Hamid, Z.A. Manan, Comparison of equilibrium and non-equilibrium models of a tray column for post-combustion CO₂ capture using DEA-promoted potassium carbonate solution, Chem. Eng. Sci. 122(2015) 291-298.

[18] S.M.P. Ooi, Development and Demonstration of a New Non-equilibrium Rate-based Process Model for the Hot Potassium Carbonate Process, 2009.

[19] Y. Wu, N.R. Mirza, G. Hu, K.H. Smith, G.W. Stevens, K.A. Mumford, Precipitating characteristics of potassium bicarbonate using concentrated potassium carbonate solvent for carbon dioxide capture. Part 1. Nucleation, Ind. Eng. Chem. Res. 56(2017) 6764-6774.

[20] K. Smith, G. Xiao, K. Mumford, J. Gouw, I. Indrawan, N. Thanumurthy, D. Quyn, R. Cuthbertson, A. Rayer, N. Nicholas, A. Lee, G. Da Silva, S. Kentish, T. Harkin, A. Qader, C. Anderson, B. Hooper, G. Stevens, Demonstration of a concentrated potassium carbonate process for CO₂ capture, Energy Fuel 28(2014) 299-306.

[21] C.C. Chen, H.I. Britt, J.F. Boston, L.B. Evans, Local composition model for excess Gibbs energy of electrolyte systems. Part I:Single solvent, single completely dissociated electrolyte systems, AICHE J. 28(1982) 588-596.

[22] R. Taylor, R. Krishna, Multicomponent Mass Transfer, Wiley, New York, 1993(c1993).

[23] R. Smith, Chemical Process Design and Integration, Wiley, Chichester, England; Hoboken, NJ, 2005(c2005).

[24] D. Quyn, A.V. Rayer, J. Gouw, I. Indrawan, K.A. Mumford, C.J. Anderson, B. Hooper, G. W. Stevens, Results from a pilot plant using un-promoted potassium carbonate for carbon capture, Energy Procedia 37(2013) 448-454.

[25] K. Smith, K. Mumford, D. Quyn, N. Temple, N. Thanumurthy, J. Gouw, S. Li, N. Nicholas, A. Lee, C. Anderson, T. Harkin, A. Qader, B. Hooper, S. Kentish, G. Stevens, CO₂CRC CCS Cost Reduction Project:Solvent Precipitation System, 2014.

[26] P. Mores, N. Scenna, S. Mussati, Post-combustion CO₂ capture process:Equilibrium stage mathematical model of the chemical absorption of CO₂ into monoethanolamine (MEA) aqueous solution, Chem. Eng. Res. Des. 89(2011) 1587-1599.

[27] C. Noeres, E.Y. Kenig, A. Go, Modelling of Reactive Separation Processes:Reactive Absorption and Reactive Distillation, 200342.

[28] C. Kale, A. Gorak, H. Schoenmakers, Modelling of the reactive absorption of CO₂ using mono-ethanolamine, Int. J. Greenhouse Gas Control 17(2013) 294-308.

[29] L. De Leye, G.F. Froment, Rigorous simulation and design of columns for gas absorption and chemical reaction-I. Packed columns, Comput. Chem. Eng. 10(1986) 493-504.

[30] N. Asprion, Nonequilibrium rate-based simulation of reactive systems:simulation model, heat transfer, and influence of film discretization, Ind. Eng. Chem. Res. 45(2006) 2054-2069.

[31] S.V. Joshi, G. Astarita, D.W. Savage, Prediction of pilot plant performance for a chemical gas absorption process, AICHE Symp. Ser 1981, p. 63.

[32] M.M. Suenson, C. Georgakis, L.B. Evans, Steady-state and dynamic modeling of a gas absorber-stripper system, Ind. Eng. Chem. Fundam. 24(1985) 288-295.

[33] D.P. Rao, Design of a Packed Column for Absorption of Carbon Dioxide in Hot K₂CO₃ Solution Promoted by Arsenious Acid, 3, 1989152-155.

[34] M.R. Rahimpour, A.Z. Kashkooli, Enhanced carbon dioxide removal by promoted hot potassium carbonate in a split-flow absorber, Chem. Eng. Process. Process Intensif. 43(2004) 857-865.

[35] T. Todinca, C. Tanasie, T. Proll, A. Cata, Absorption with chemical reaction:Evaluation of rate promoters effect on CO₂ absorption in hot potassium carbonate solutions, Comput. Aided Chem. Eng. 24(2007) 1065-1070.

[36] H.A. Al-Ramdhan, A Rate-based Model for the Design and Simulation of a Carbon Dioxide Absorber Using the Hot Potassium Carbonate Process, Colorado School of Mines, 2001.

[37] D. Sanyal, N. Vasishtha, D.N. Saraf, Modeling of carbon dioxide absorber using hot carbonate process, Ind. Eng. Chem. Res. 27(1988) 2149-2156.

[38] L. Marini, K. Clement, C. Georgakis, M.M. Suenson, Experimental and theoretical investigation of an absorber-stripper pilot plant under nonequilibrium conditions, Ind. Eng. Chem. Fundam. 24(1985) 296-301.

[39] R. Thiele, R. Faber, J.-U. Repke, H. Thielert, G. Wozny, Design of industrial reactive absorption process in sour gas treatment using rigorous modeling and accurate experimentation, Trans IChemE Part A Chem. Eng. Res. Des. 85(2007) 74-87.