[1] Z.Y. Zhang, K.J. Huang, Z.H. Liu, Synthesis of high molecular weight nylon 46 in supercritical carbon dioxide, Macromolecules 44(2011) 820-825.[2] M. Olaf, K. Dirk,W. Hans, F. Christian, V.Marc,W. Holger,Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrene, Polymer 45(2004) 739-748.[3] M. Keith, Polyamides-Still strong after seventy years, Macromol. React. Eng. 5(2011) 22-54.[4] R.M. Garcia, J.Y. Cavaille, A. Dufresne, D. Dupeyre, Cellulose-copolyamide 6,69 blends, J. Appl. Polym. Sci. 59(1996) 1995-2007.[5] B. Dorin, K. Akanksha, G.T. Beatrice, L. Claudia, L. Marybeth, A.B. Gary, Microwave assisted extraction of biodiesel feedstock from the seeds of invasive Chinese tallow tree, Environ. Sci. Technol. 44(2010) 4019-4025.[6] E. Kaya, L.J. Mathias, Investigation of melting behaviors and crystallinity of linear polyamide with high-aliphatic content, J. Appl. Polym. Sci. 123(2012) 92-99.[7] X.W. Cui, S.B. Qing, D.Y. Yan, Isothermal and nonisothermal crystallization kinetics of novel odd-odd polyamide 911, Eur. Polym. J. 41(2005) 3060-3068.[8] X.W. Cui, D.Y. Yan, Y.P.Wang, Isothermal and nonisothermal crystallization kinetics of novel even-odd nylon 1011, J. Appl. Polym. Sci. 97(2005) 1637-1643.[9] J.B. Song, H.L. Zhang, M.Q. Ren, Q.Y. Chen, X.H. Sun, S.Y. Wang, H.F. Zhang, Z.S. Mo, Crystal transition of nylon-12,12 under drawing and annealing, Macromol. Rapid Commun. 26(2005) 487-490.[10] A. Savas, Q. Yu, Effects of cooling rate on fracture resistance of nylon 6-silicate nanocomposites, Compos. Part A 36(2005) 624-630.[11] F.C. Chiu, S.M. Lai, Y.L. Chen, T.H. Lee, Investigation on the polyamide 6/organoclay nanocomposites with or without a maleated polyolefin elastomer as a toughener, Polymer 46(2005) 1600-1609.[12] A. Jeziorny, Parameters characterizing the kinetics of the non-isothermal crystallization of poly(ethylene terephthalate) determined by DSC, Polymer 19(1978) 1142-1144.[13] S.Y. Liu, Y.N. Yu, Y. Cui, H.F. Zhang, Z.S. Mo, Isothermal and nonisothermal crystallization kinetics of nylon-11, J. Appl. Polym. Sci. 70(12) (1998) 2371-2380.[14] J.J. Hwang, S.M. Huang, S.J. Liu, H.C. Chu, L.H. Lin, C.S. Chung, Crystallization kinetics of poly (L-lactic acid)/montmorillonite nanocomposites under isothermal crystallization condition, J. Appl. Polym. Sci. 124(2012) 2216-2226.[15] P. Cebe, S.D. Hong, Crystallization behaviour of poly(ether-ether-ketone), Polymer 27(1986) 1183-1189.[16] M. Avrami, Kinetics of phase change. I general theory, J. Chem. Phys. 7(1939) 1130-1136.[17] M. Avrami, Kinetics of phase change. II transformation-time relations for random distribution of nuclei, J. Chem. Phys. 8(1940) 212-218.[18] M. Avrami, Granulation, phase change, and microstructure kinetics of phase change. III, J. Chem. Phys. 9(1941) 177-187.[19] J.B. Song,M.Q. Ren, Q.Y. Chen, X.H. Sun, H.L. Zhang, C.L. Song, H.F. Zhang, Z.S.Mo, Isothermal and nonisothermal crystallization kinetics of irradiated nylon 1212, J. Polym. Sci. B Polym. Phys. 43(2005) 2326.[20] Q.X. Zhang, Z.H. Zhang, H.F. Zhang, Z.S. Mo, Isothermal and nonisothermal crystallization kinetics of nylon-46, J. Polym. Sci. B Polym. Phys. 40(2002) 1784-1791.[21] Y.S. Zhang, B.B. Wang, G.S. Hu, Isothermal crystallization kinetics and melting behavior of polyamide 11/silica nanocomposites prepared by in situ melt polymerization, J. Appl. Polym. Sci. 123(2012) 273-279.[22] C.C. Lin, The rate of crystallization of poly(ethylene terephthalate) by differential scanning calorimetry, Polym. Eng. Sci. 23(1983) 113-121.[23] P. Cebe, S.D. Hong, Crystallization behavior of poly(ether-ether-ketone), Polymer 27(1986) 1183-1190.[24] T. Ozawa, Kinetics of non-isothermal crystallization, Polymer 12(1971) 150-158.[25] Q.C. Fan, F.H. Duan, H.B. Guo, T.Wu, Non-isothermal crystallization kinetics of polypropylene and hyperbranched polyester blends, Chin. J. Chem. Eng. 23(2) (2015) 441-445.[26] H.E. Kissinger, Variation of peak temperature with heating rate in differential thermal analysis, J. Res. Natl. Stand. (US) 57(1956) 217-221. |