SCI和EI收录∣中国化工学会会刊

›› 2016, Vol. 24 ›› Issue (8): 963-971.DOI: 10.1016/j.cjche.2016.05.009

• Fluid Dynamics and Transport Phenomena • Previous Articles     Next Articles

Experimental and numerical investigations of scale-up effects on the hydrodynamics of slurry bubble columns

Zhaoqi Li, Xiaoping Guan, Lijun Wang, Youwei Cheng, Xi Li   

  1. Department of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
  • Received:2015-06-04 Revised:2015-11-15 Online:2016-09-21 Published:2016-08-28
  • Supported by:
    Supported by the National High Technology Research and Development Program of China (2011AA05A205) and the National Natural Science Foundation of China (U1162125, U1361112).

Experimental and numerical investigations of scale-up effects on the hydrodynamics of slurry bubble columns

Zhaoqi Li, Xiaoping Guan, Lijun Wang, Youwei Cheng, Xi Li   

  1. Department of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
  • 通讯作者: Lijun Wang
  • 基金资助:
    Supported by the National High Technology Research and Development Program of China (2011AA05A205) and the National Natural Science Foundation of China (U1162125, U1361112).

Abstract: Experiments and simulations were conducted for bubble columns with diameter of 0.2 m (180 mm i.d.), 0.5 m (476 mm i.d.) and 0.8 m (760 mm i.d.) at high superficial gas velocities (0.12-0.62 m·s-1) and high solid concentrations (0-30 vol%). Radial profiles of time-averaged gas holdup, axial liquid velocity, and turbulent kinetic energy were measured by using in-house developed conductivity probes and Pavlov tubes. Effects of column diameter, superficial gas velocity, and solid concentration were investigated in a wide range of operating conditions. Experimental results indicated that the average gas holdup remarkably increases with superficial gas velocity, and the radial profiles of investigated flow properties become steeper at high superficial gas velocities. The axial liquid velocities significantly increase with the growth of the column size, whereas the gas holdup was slightly affected. The presence of solid in bubble columns would inhibit the breakage of bubbles, which results in an increase in bubble rise velocity and a decrease in gas holdup, but time-averaged axial liquid velocities remain almost the same as that of the hollow column. Furthermore, a 2-D axisymmetric k-ε model was used to simulate heterogeneous bubbly flow using commercial code FLUENT 6.2. The lateral lift force and the turbulent diffusion force were introduced for the determination of gas holdup profiles and the effects of solid concentration were considered as the variation of average bubble diameter in the model. Results predicted by the CFD simulation showed good agreement with experimental data.

Key words: Bubble column, CFD, Hydrodynamics, Multiphase flow, Scaling-up, Solid concentration

摘要: Experiments and simulations were conducted for bubble columns with diameter of 0.2 m (180 mm i.d.), 0.5 m (476 mm i.d.) and 0.8 m (760 mm i.d.) at high superficial gas velocities (0.12-0.62 m·s-1) and high solid concentrations (0-30 vol%). Radial profiles of time-averaged gas holdup, axial liquid velocity, and turbulent kinetic energy were measured by using in-house developed conductivity probes and Pavlov tubes. Effects of column diameter, superficial gas velocity, and solid concentration were investigated in a wide range of operating conditions. Experimental results indicated that the average gas holdup remarkably increases with superficial gas velocity, and the radial profiles of investigated flow properties become steeper at high superficial gas velocities. The axial liquid velocities significantly increase with the growth of the column size, whereas the gas holdup was slightly affected. The presence of solid in bubble columns would inhibit the breakage of bubbles, which results in an increase in bubble rise velocity and a decrease in gas holdup, but time-averaged axial liquid velocities remain almost the same as that of the hollow column. Furthermore, a 2-D axisymmetric k-ε model was used to simulate heterogeneous bubbly flow using commercial code FLUENT 6.2. The lateral lift force and the turbulent diffusion force were introduced for the determination of gas holdup profiles and the effects of solid concentration were considered as the variation of average bubble diameter in the model. Results predicted by the CFD simulation showed good agreement with experimental data.

关键词: Bubble column, CFD, Hydrodynamics, Multiphase flow, Scaling-up, Solid concentration