[1] O. Mohamad, F. Mousa, J. Moharmad, A comprehensive review on double pipe heat exchangers, Appl. Therm. Eng. 110(2017) 1075-1090. [2] S.S. Hsieh, C.T. Liauh, A.C. Ku, Thermal analysis of the performances of helicaltype, roughened, double-pipe heat exchangers, Appl. Energy 26(1987) 67-73. [3] M. Lachi, N. El Wakil, J. Padet, The time constant of double pipe and one pass shell-and-tube heat exchangers in the case of varying fluid flow rates, Int. J. Heat Mass Transf. 40(1997) 2067-2079. [4] Q. Ronghui, D. Chuanshuai, Z. Lizhi, Wave-wise falling film in liquid desiccant dehumidification systems:Model development and time-series parameter analysis, Int. J. Heat Mass Transf. 132(2019) 96-106. [5] S. Eiamsa-ard, K. Wongcharee, P. Eiamsa-ard, C. Thianpong, Thermohydraulic investigation of turbulent flow through a round tube equipped with twisted tapes consisting of centre wings and alternate-axes, Exp. Therm. Fluid Sci. 34(8) (2010) 1151-1161. [6] Bin Sun, Cheng Peng, Ruiliang Zuo, Di Yang, Hongwei Li, Investigation on the flow and convective heat transfer characteristics of nanofluids in the plate heat exchanger, Exp. Therm. Fluid Sci. 76(2016) 75-86. [7] S. Eiamsa-Ard, P. Somkleang, C. Nuntadusit, C. Thianpong, Heat transfer enhancement in tube by inserting uniform/non-uniform twisted-tapes with alternate axes:Effect of rotated-axis length, Appl. Therm. Eng. 54(2013) 289-309. [8] M.M.K. Bhuiya, M.S.U. Chowdhury, M. Saha, M.T. Islam, Heat transfer and friction factor characteristics in turbulent flow through a tube fitted with perforated twisted tape inserts, Int. Commun. Heat Mass Transf. 46(2013) 49-57. [9] S. Eiamsa-ard, C. Thianpong, P. Eiamsa-ard, P. Promvonge, Convective heat transfer in a circular tube with short-length twisted tape insert, Int. Commun. Heat Mass Transf. 36(4) (2009) 365-371. [10] P. Naphon, Heat transfer and pressure drop in the horizontal double pipes with and without twisted tape insert, Int. Commun. Heat Mass Transf. 33(2) (2006) 166-175. [11] Z. Shaojie, L. Lin, D. Chuanshuai, C. Seung Hyun, Performance evaluation of a double-pipe heat exchanger fitted with self-rotating twisted tapes, Appl. Therm. Eng. 158(2019) 113770. [12] Z. Shaojie, L. Lin, D. Chuanshuai, C. Seung Hyun, Thermal characteristics of perforated self-rotating twisted tapes in a double-pipe heat exchanger, Appl. Therm. Eng. 162(2019) 114296. [13] H. Masuda, A. Ebata, K. Teramae, N. Hishinuma, Alteration of thermal conductivity and viscosity of liquid by dispersing ultrafine particles (dispersion of gamma-Al2O3, SiO2 and TiO2 ultrafine particles), Netsu Bussei 4(1993) 227-233. [14] S. Lee, S.U.S. Choi, Application of metallic nanoparticle suspensions in advanced cooling systems, in:Proceedings of International Mechanical Engineering Congress and Exhibition, Atlanta, United States, 1996. [15] D. Chuanshuai, H. Takashi, Heat transfer correlation for two-component twophase slug flow in horizontal pipes, Appl. Therm. Eng. 141(2018) 866-876. [16] D.S. Wen, Y.L. Ding, Experimental investigation into convective heat transfer of nanofluids at the entrance region under laminar flow conditions, Int. J. Heat Mass Transf. 47(24) (2004) 5181-5188. [17] D. Chuanshuai, L. Lin, W. Xin, Experimental investigation on non-boiling heat transfer of two-component air-oil and air-water slug flow in horizontal pipes, Int. J. Multiph. Flow 119(2019) 28-41. [18] S.Z. Heris, S.G. Etemad, A.N. Esfahany, Experimental investigation of oxide nanofluids laminar flow convective heat transfer, Int. Commun. Heat Mass Transf. 33(4) (2006) 529-535. [19] S. Zeinali Heris, M. Nasr Esfahany, S.Gh. Etemad, Experimental investigation of convective heat transfer of Al2O3/water nanofluid in circular tube, Int. J. Heat Fluid Flow 28(2007) 203-210. [20] S.M. Fotukian, M. Nasr Esfahany, Experimental study of turbulent convective heat transfer and pressure drop of dilute CuO/water nanofluid inside a circular tube, Int. Commun. Heat Mass Transf. 37(2010) 214-219. [21] B. Sun, W. Lei, D. Yang, Flow and convective heat transfer characteristics of Fe2O3-water nanofluids inside copper tubes, Int. Commun. Heat Mass Transf. 64(2015) 21-28. [22] X. Luo, H. Gong, Z. He, P. Zhang, L. He, Research on mechanism and characteristics of oil recovery from oily sludge in ultrasonic fields, J. Hazard. Mat. 399(2020) 123137. [23] D. Chuanshuai, H. Takashi, Correlation of heat transfer coefficient for two-component two-phase slug flow in a vertical pipe, Int. J. Multiph. Flow 108(2018) 124-139. [24] D. Chuanshuai, H. Takashi, Modeling of heat transfer coefficient for upward no-phase-change two-phase flow in inclined pipes, Appl. Therm. Eng. 169(2020) 114921. [25] S. Eiamsa-ard, P. Promvonge, Thermal characteristics in round tube fitted with serrated twisted tape, Appl. Therm. Eng. 30(2010) 1673-1682. [26] N. Piriyarungrod, M. Kumar, C. Thianpong, M. Pimsarn, V. Chuwattanakul, Intensification of thermo-hydraulic performance in heat exchanger tube inserted with multiple twisted-tapes, Appl. Therm. Eng. 136(2018) 516-530. [27] D. Chuanshuai, L. Lu, W. Tao, Investigating dehumidification performance of solar-assisted liquid desiccant dehumidifiers considering different surface properties, Energy 164(2018) 978-994. [28] D. Chuanshuai, L. Lu, W. Tao, Experimental study on dehumidification performance enhancement by TiO2 superhydrophilic coating for liquid desiccant plate dehumidifiers, Build Environ. 124(2017) 219-231. |