SCI和EI收录∣中国化工学会会刊

Chinese Journal of Chemical Engineering ›› 2014, Vol. 22 ›› Issue (4): 370-382.DOI: 10.1016/S1004-9541(14)60065-3

• 催化、动力学与反应工程 • 上一篇    下一篇

Performance of Dual-throat Supersonic Separation Device with Porous Wall Structur

额日其太1, 韩景2, 段然1, 吴盟1   

  1. 1 School of Energy and Power Engineering, Beihang University, Beijing 100191, China;
    2 China Huanqiu Contracting & Engineering Corporation, Beijing 100029, China
  • 收稿日期:2012-09-11 修回日期:2012-11-21 出版日期:2014-04-28 发布日期:2014-04-04
  • 通讯作者: Eriqitai

Performance of Dual-throat Supersonic Separation Device with Porous Wall Structur

Eriqitai1, HAN Jing2, DUAN Ran1, WU Meng1   

  1. 1 School of Energy and Power Engineering, Beihang University, Beijing 100191, China;
    2 China Huanqiu Contracting & Engineering Corporation, Beijing 100029, China
  • Received:2012-09-11 Revised:2012-11-21 Online:2014-04-28 Published:2014-04-04

摘要: In this paper, a dual-throat supersonic separation device with porous wall has been proposed to solve the starting problem of supersonic separator, and the feasibility of the proposed device has been tested numerically and experimentally. Its flow characteristics have been investigated and the effect of some important parameters including nozzle pressure ratio (RNP), inlet temperature and swirl intensity were examined. In the device, the supersonic flow state and strong centrifugal acceleration of 240000g can be obtained, which are necessary for the condensation and separation of water vapor. The supersonic region in the device enlarged and the shock wave shifted downstream along with the increasing RNP. The separation performance was improved with the increasing RNP and the inlet temperature. The best separation performance in this study was obtained with ΔTd=28 K.

关键词: supersonic separation, cyclone gas/liquid separation, porous wall, dual-throat

Abstract: In this paper, a dual-throat supersonic separation device with porous wall has been proposed to solve the starting problem of supersonic separator, and the feasibility of the proposed device has been tested numerically and experimentally. Its flow characteristics have been investigated and the effect of some important parameters including nozzle pressure ratio (RNP), inlet temperature and swirl intensity were examined. In the device, the supersonic flow state and strong centrifugal acceleration of 240000g can be obtained, which are necessary for the condensation and separation of water vapor. The supersonic region in the device enlarged and the shock wave shifted downstream along with the increasing RNP. The separation performance was improved with the increasing RNP and the inlet temperature. The best separation performance in this study was obtained with ΔTd=28 K.

Key words: supersonic separation, cyclone gas/liquid separation, porous wall, dual-throat