Influence of surface etching pretreatment on PEO process of eutectic Al-Si alloy

doi:10.1016/j.cjche.2015.06.004

›› 2015, Vol. 23 ›› Issue (9): 1572-1578.DOI: 10.1016/j.cjche.2015.06.004

• 材料与产品工程 • 上一篇

Influence of surface etching pretreatment on PEO process of eutectic Al-Si alloy

Kang Li¹, Wenfang Li¹, Guoge Zhang¹, Min Wang^1,2, Peng Tang^1,3

1 School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641, China;
2 College of Mechanical Engineering, Guangdong Polytechnic Normal University, Guangzhou 510635, China;
3 School of Materials Science and Engineering, Guangxi University, Nanning 530004, China

收稿日期:2014-10-12 修回日期:2015-05-20 出版日期:2015-09-28 发布日期:2015-10-24
通讯作者: Wenfang Li
基金资助:
Supported by the Natural Science Foundation of Guangdong Province, China (S2013010015211).

Influence of surface etching pretreatment on PEO process of eutectic Al-Si alloy

Kang Li¹, Wenfang Li¹, Guoge Zhang¹, Min Wang^1,2, Peng Tang^1,3

1 School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641, China;
2 College of Mechanical Engineering, Guangdong Polytechnic Normal University, Guangzhou 510635, China;
3 School of Materials Science and Engineering, Guangxi University, Nanning 530004, China

Received:2014-10-12 Revised:2015-05-20 Online:2015-09-28 Published:2015-10-24
Supported by:
Supported by the Natural Science Foundation of Guangdong Province, China (S2013010015211).

摘要/Abstract

摘要： To solve the problems generally encountered during the plasma electrolytic oxidation (PEO) of Al alloys with high Si content, a pretreatment of chemical etching was applied before the process. The influence of such pretreatment was studied by SEM, EDS and XRD. The pretreatment presents a significant effect on positive voltage at the beginning stage of PEO, leading to higher voltage over thewhole process. The difference between the positive voltages of non-etched and etched specimens decreases graduallywith the increase of processing time. The pretreatment exhibitsmuch less influence on the negative voltage. For the sample with surface pretreatment, the average growth rate of PEO coating is increased from 0.50 to 0.84 μm·min^-1 and the energy consumption is decreased from 6.30 to 4.36 kW·h·μm^-1·m^-2. At the same time, both mullite and amorphous SiO₂ contents are decreased in the coating.

关键词: Plasma electrolytic oxidation, Eutectic Al-Si alloy, Pretreatment, Etching

Abstract: To solve the problems generally encountered during the plasma electrolytic oxidation (PEO) of Al alloys with high Si content, a pretreatment of chemical etching was applied before the process. The influence of such pretreatment was studied by SEM, EDS and XRD. The pretreatment presents a significant effect on positive voltage at the beginning stage of PEO, leading to higher voltage over thewhole process. The difference between the positive voltages of non-etched and etched specimens decreases graduallywith the increase of processing time. The pretreatment exhibitsmuch less influence on the negative voltage. For the sample with surface pretreatment, the average growth rate of PEO coating is increased from 0.50 to 0.84 μm·min^-1 and the energy consumption is decreased from 6.30 to 4.36 kW·h·μm^-1·m^-2. At the same time, both mullite and amorphous SiO₂ contents are decreased in the coating.

Key words: Plasma electrolytic oxidation, Eutectic Al-Si alloy, Pretreatment, Etching

Kang Li, Wenfang Li, Guoge Zhang, Min Wang, Peng Tang. Influence of surface etching pretreatment on PEO process of eutectic Al-Si alloy[J]. , 2015, 23(9): 1572-1578.

参考文献

[1] O. Uzun, T. Karaaslan, M. Gogebakan, M. Keskin, Hardness and microstructural characteristics of rapidly solidified Al-8-16wt% Si alloys, J. Alloys Compd. 376 (2004) 149-157.
[2] B.K. Prasad, K. Venkateswarlu, O.P. Modi, A.K. Jha, S. DAS, R. Dasgupta, A.H. Yegneswaran, Sliding wear behavior of some Al-Si alloys: Role of shape and size of Si particles and test conditions, Metall. Mater. Trans. A 29 (1998) 2747-2752.
[3] X. Li, X. Nie, L. Wang, D.O. Northwood, Corrosion protection properties of anodic oxide coatings on an Al-Si alloy, Surf. Coat. Technol. 200 (2005) 1994-2000.
[4] A. Forn, J.A. Picas, M.T. Baile, E. Martin, V.G. García, Microstructure and tribological properties of anodic oxide layer formed on Al-Si alloy produced by semisolid processing, Surf. Coat. Technol. 202 (2007) 1139-1143.
[5] K.V. Ashok, Sparking voltages and side reactions during anodization of valve metals in terms of electron tunnelling, Corros. Sci. 11 (1971) 411-417.
[6] F.C.Walsh, C.T.J. Low, R.J.K.Wood, K.T. Stevens, J. Archer, A.R. Poeton, A. Ryder, Plasma electrolytic oxidation (PEO) for production of anodised coatings on lightweight metal (Al, Mg, Ti) alloys, Trans. Inst. Met. Finish. 87 (2009) 122-135.
[7] R.C. Barik, J.A. Wharton, R.J.K. Wood, K.R. Stokes, R.L. Jones, Corrosion, erosion and erosion-corrosion performance of plasma electrolytic oxidation (PEO) deposited Al₂O₃ coatings, Surf. Coat. Technol. 199 (2005) 158-167.
[8] J.A. Curran, H. Kalkanc, Y. Magurova, T.W. Clyne, Mullite-rich plasma electrolytic oxide coatings for thermal barrier applications, Surf. Coat. Technol. 201 (2007) 8683-8687.
[9] W.B. Xue, X.L. Shi, M. Hua, Y.L. Li, Preparation of anti-corrosion films by micro arc oxidation on an Al-Si alloy, Appl. Surf. Sci. 253 (2007) 6118-6124.
[10] L. Wang, X. Nie, Silicon effects on formation of EPO oxide coatings on aluminum alloys, Thin Solid Films 494 (2006) 211-218.
[11] L.R. Krishna, A.S. Purnima, N.P.Wasekar, G. Sundararajan, Kinetics and properties of micro arc oxidation coatings deposited on commercial Al alloys, Metall.Mater. Trans. A 38 (2007) 370-378.
[12] E. Matykina, R. Arrabal, P. Skeldon, G.E. Thompson, Optimisation of the plasma electrolytic oxidation process efficiency on aluminium, Surf. Interface Anal. 42 (2010) 221-226.
[13] A.L. Yerokhin, A. Leyland, A. Matthews, Kinetic aspects of aluminium titanate layer formation on titanium alloys by plasma electrolytic oxidation, Appl. Surf. Sci. 200 (2002) 172-184.
[14] C.R. Eritzsche, Anodic growth, dielectric breakdown and carrier transport in amorphous SiO₂ films, J. Phys. Chem. Solids 30 (1969) 1885-1895.
[15] Q.B. Li, J. Liang, B.X. Liu, Z.J. Peng, Q. Wang, Effects of cathodic voltages on structure and wear resistance of plasma electrolytic oxidation coatings formed on aluminium alloy, Appl. Surf. Sci. 297 (2014) 176-181.
[16] M.Q. Tang,W.P. Li, H.C. Liu, L.Q. Zhu, Influence of K2TiF6 in electrolyte on characteristics of the microarc oxidation coating on aluminum alloy, Curr. Appl. Phys. 12 (2012) 1259-1265.
[17] A.L. Yerokhin, T.A. Shatrov, V. Samsonov, P. Shashkov, A. Pilkington, A. Leyland, A. Matthews, Oxide ceramic coatings on aluminium alloys produced by a pulsed bipolar plasma electrolytic oxidation process, Surf. Coat. Technol. 199 (2005) 150-157.
[18] D.J. Shen, J. Zou, L.L. Wu, F.F. Liu, G.L. Li, J.R. Cai, D.L. He, H.J. Ma, G.R. Jiang, Microstructure and corrosion behavior of micro-arc oxidation coating on 6061 aluminum alloy pre-treated by high-temperature oxidation, Appl. Surf. Sci. 265 (2013) 431-437.
[19] E.S. Kooij, K. Butter, J.J. Kelly, Silicon etching in HNO3/HF solution: Charge balance for the oxidation reaction, Electrochem. Solid-State Lett. 2 (4) (1999) 178-180.
[20] C. Rallan, A. Garforth, Growth of hierarchically structured high-surface area alumina on FeCralloy® rods, Chin. J. Chem. Eng. 22 (2014) 861-868.
[21] F.M. Alkharafi, W.A. Badawy, Corrosion and passivation of Al and Al-Si alloys in nitric acid solutions II—effect of chloride ions, Electrochim. Acta 40 (1995) 1811-1817.
[22] J.W. Schultze, M.M. Lohrengel, Stability, reactivity and breakdown of passive films: Problems of recent and future research, Electrochim. Acta 45 (2000) 2499-2513.
[23] F.T. Xu, Y. Xia, G. Li, Themechanismof PEO process on Al-Si alloys with the bulk primary silicon, Appl. Surf. Sci. 255 (2009) 9531-9538.
[24] R.O. Hussein, X. Nie, D.O. Northwood, A. Yerokhin, A.Matthews, Spectroscopic study of electrolytic plasma and discharging behaviour during the plasma electrolytic oxidation (PEO) process, J. Phys. D. Appl. Phys. 43 (2010) 1-16.
[25] A.L. Yerokhin, L.O. Snizhko, N.L. Gurevina, A. Leyland, A. Pilkington, A. Matthews, Discharge characterization in plasma electrolytic oxidation of aluminium, J. Phys. D. Appl. Phys. 36 (2003) 2110-2120.
[26] A.A. Voevodin, A.L. Yerokhin, V.V. Lyubimov, M.S. Donley, J.S. Zabinski, Characterization of wear protective Al-Si-O coatings formed on Al-based alloys by micro-arc discharge treatment, Surf. Coat. Technol. 86-87 (1996) 516-521.

Influence of surface etching pretreatment on PEO process of eutectic Al-Si alloy

Influence of surface etching pretreatment on PEO process of eutectic Al-Si alloy

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Wei Yang, Yalun Ma, Xu Zhang, Fan Yang, Dong Zhang, Shengji Wu, Huanghu Peng, Zezhou Chen, Lei Che. Effect of acid-associated mechanical pretreatment on the hydrolysis behavior of pine sawdust in subcritical water[J]. 中国化学工程学报, 2023, 58(6): 195-204.
[2]	Kaili Zhang, Ligang Wei, Qingqin Sun, Jian Sun, Kunlan Li, Shangru Zhai, Qingda An, Junwang Zhang. Effects of formaldehyde on fermentable sugars production in the low-cost pretreatment of corn stalk based on ionic liquids[J]. 中国化学工程学报, 2022, 42(2): 406-414.
[3]	Wenlu Song, Rui Huang, Hao Guo, Chunguang Yin, Chuanling Wang, Jun Cheng, Weijuan Yang. Characterization of wet microalgal cells pretreated with steam for lipid extraction[J]. 中国化学工程学报, 2021, 37(9): 114-120.
[4]	Ruolin Guan, Hairong Yuan, Liang Zhang, Xiaoyu Zuo, Xiujin Li. Combined pretreatment using CaO and liquid fraction of digestate of rice straw: Anaerobic digestion performance and electron transfer[J]. 中国化学工程学报, 2021, 36(8): 223-232.
[5]	Boyang Bai, Luyao Qiang, Suisui Zhang, Zhiwei Peng, Hang Mu, Xiaoxun Ma. The effect of hydrothermal pretreatment on the structure and fast pyrolysis behaviors of ShengLi lignite[J]. 中国化学工程学报, 2021, 35(7): 265-274.
[6]	Chi Ma, Le Sang, Xiaonan Duan, Jiabin Yin, Jisong Zhang. An efficient method for enhancing adhesion and uniformity of Al₂O₃ coatings on nickel micro-foam used in micropacked beds[J]. 中国化学工程学报, 2021, 39(11): 162-172.
[7]	Xitong Wang, Hairong Yuan, Xiaocong Song, Xiujin Li, Xiaoyu Zuo. Lower temperature hydrothermal pretreatment improves the anaerobic digestion performance of spent cow bedding[J]. 中国化学工程学报, 2021, 39(11): 255-260.
[8]	Rashid Mustafa Korai, Xiujin Li. Effect of ultrasonic assisted KOH pretreatment on physiochemical characteristic and anaerobic digestion performance of wheat straw[J]. 中国化学工程学报, 2020, 28(9): 2409-2416.
[9]	Hairong Yuan, Ruolin Guan, Akiber Chufo Wachemo, Yatian Zhang, Xiaoyu Zuo, Xiujin Li. Improving physicochemical characteristics and anaerobic digestion performance of rice straw via ammonia pretreatment at varying concentrations and moisture levels[J]. 中国化学工程学报, 2020, 28(2): 541-547.
[10]	Hairong Yuan, Yanyan Lan, Jialin Zhu, Akiber Chufo Wachemo, Xiujin Li, Liang Yu. Effect on anaerobic digestion performance of corn stover by freezing-thawing with ammonia pretreatment[J]. Chinese Journal of Chemical Engineering, 2019, 27(1): 200-207.
[11]	Huisheng Lü, Xingfang Shi, Yonghui Li, Fanmei Meng, Shuangyan Liu, Li Yan. Multi-objective regulation in autohydrolysis process of corn stover by liquid hot water pretreatment[J]. , 2017, 25(4): 499-506.
[12]	T. Hayat, M. Ijaz Khan, M. Waqas, A. Alsaedi, T. Yasmeen. Diffusion of chemically reactive species in third grade fluid flow over an exponentially stretching sheet considering magnetic field effects[J]. , 2017, 25(3): 257-263.
[13]	Yuanyuan Li, Yelong Zhang, Hongbo Zheng, Jian Du, Hongman Zhang, Juanzi Wu, He Huang. Preliminary evaluation of five elephant grass cultivars harvested at different time for sugar production[J]. Chinese Journal of Chemical Engineering, 2015, 23(7): 1188-1193.
[14]	Xianli Shi, Li Deng, Fangfang Sun, Jieyu Liang, Xu Deng. Key factors governing alkaline pretreatment of waste activated sludge[J]. Chinese Journal of Chemical Engineering, 2015, 23(5): 842-846.
[15]	杨懂艳, 庞云芝, 袁海荣, 陈树林, 马晶伟, 郁亮, 李秀金. Enhancing Biogas Production from Anaerobically Digested Wheat Straw Through Ammonia Pretreatment[J]. Chinese Journal of Chemical Engineering, 2014, 22(5): 576-582.