SCI和EI收录∣中国化工学会会刊

›› 2017, Vol. 25 ›› Issue (4): 516-522.DOI: 10.1016/j.cjche.2016.10.005

• Energy, Resources and Environmental Technol • 上一篇    下一篇

Integrated ozone–photo–Fenton process for the removal of pollutant from industrial wastewater

P. Asaithambi, Baharak Sajjadi, Abdul Raman Abdul Aziz   

  1. Department of Chemical Engineering, Faculty of Engineering, University of Malaya, 50603, Malaysia
  • 收稿日期:2016-04-24 修回日期:2016-10-03 出版日期:2017-04-28 发布日期:2017-06-03
  • 通讯作者: P. Asaithambi, Abdul Raman Abdul Aziz

Integrated ozone–photo–Fenton process for the removal of pollutant from industrial wastewater

P. Asaithambi, Baharak Sajjadi, Abdul Raman Abdul Aziz   

  1. Department of Chemical Engineering, Faculty of Engineering, University of Malaya, 50603, Malaysia
  • Received:2016-04-24 Revised:2016-10-03 Online:2017-04-28 Published:2017-06-03

摘要: The use of hybrid advanced oxidation processes (AOPs) for the removal of pollutants from industrial effluents has been extensively studied in recent literature.The aim of this study is to compare the performance of the photo,Fenton,photo-Fenton and ozone-photo-Fenton processes in terms of color removal and chemical oxygen demand (COD) removal of distillery industrial effluent together with the associated electrical energy per order.It was observed from the experimental results that the O3/UV/Fe2+/H2O2 process yielded a 100% color and 95.50% COD removals with electrical energy per order of 0.015 kW·h·m-3 compared to all other combinations of the AOPs.The effects of various operating parameters such as H2O2 and Fe2+ concentration,effluent pH,COD concentration and UV power on the removal of color,COD and electrical energy per order for the ozone-photo-Fenton process was critically studied and reported.The color and COD removals were analyzed using a UV/Vis spectrometer and closed reflux method.

关键词: Distillery effluent, O3/UV/Fe2+/H2O2, Color and COD removals, Electrical energy per order

Abstract: The use of hybrid advanced oxidation processes (AOPs) for the removal of pollutants from industrial effluents has been extensively studied in recent literature.The aim of this study is to compare the performance of the photo,Fenton,photo-Fenton and ozone-photo-Fenton processes in terms of color removal and chemical oxygen demand (COD) removal of distillery industrial effluent together with the associated electrical energy per order.It was observed from the experimental results that the O3/UV/Fe2+/H2O2 process yielded a 100% color and 95.50% COD removals with electrical energy per order of 0.015 kW·h·m-3 compared to all other combinations of the AOPs.The effects of various operating parameters such as H2O2 and Fe2+ concentration,effluent pH,COD concentration and UV power on the removal of color,COD and electrical energy per order for the ozone-photo-Fenton process was critically studied and reported.The color and COD removals were analyzed using a UV/Vis spectrometer and closed reflux method.

Key words: Distillery effluent, O3/UV/Fe2+/H2O2, Color and COD removals, Electrical energy per order