Heat transfer and friction factor of Therminol liquid phase heat transfer fluid in a ribbed tube

doi:10.1016/j.cjche.2016.10.009

摘要/Abstract

摘要： Experiments and simulations on flow and heat transfer behavior of Therminol-55 liquid phase heat transfer fluid have been conducted in a ribbed tube with the outer diameter and inner diameter 25.0 and 20.0 mm, pitch and rib height of 4.5 and 1.0 mm. respectively. Experimental results show that the heat transfer and thermal performance of Therminol-55 liquid phase heat transfer fluid in the ribbed tube are considerably improved compared to those of the smooth tube. The Nusselt number increase with the increase of Reynolds number. The increase in heat transfer rate of the ribbed tube has a mean value of 2.24 times. Also, the pressure drop results reveal that the average friction factor of the ribbed tube is in a range of 2.4 and 2.8 times over the smooth tube. Numerical simulations of three-dimensional flow behavior of Therminol-55 liquid phase heat transfer fluid are carried out using three different turbulence models in the ribbed tube. The numerical results show that the heat transfer of ribbed tube is improved because vortices are generated behind ribs, which produce some disruptions to fluid flow and enhance heat transfer compared with smooth tube. The numerical results prove that the ribbed tube can improve heat transfer and fluid flow performances of Therminol liquid phase heat transfer fluid.

关键词: Ribbed tube, Heat transfer fluid, Friction factor, Experiments, Numerical simulations

Abstract: Experiments and simulations on flow and heat transfer behavior of Therminol-55 liquid phase heat transfer fluid have been conducted in a ribbed tube with the outer diameter and inner diameter 25.0 and 20.0 mm, pitch and rib height of 4.5 and 1.0 mm. respectively. Experimental results show that the heat transfer and thermal performance of Therminol-55 liquid phase heat transfer fluid in the ribbed tube are considerably improved compared to those of the smooth tube. The Nusselt number increase with the increase of Reynolds number. The increase in heat transfer rate of the ribbed tube has a mean value of 2.24 times. Also, the pressure drop results reveal that the average friction factor of the ribbed tube is in a range of 2.4 and 2.8 times over the smooth tube. Numerical simulations of three-dimensional flow behavior of Therminol-55 liquid phase heat transfer fluid are carried out using three different turbulence models in the ribbed tube. The numerical results show that the heat transfer of ribbed tube is improved because vortices are generated behind ribs, which produce some disruptions to fluid flow and enhance heat transfer compared with smooth tube. The numerical results prove that the ribbed tube can improve heat transfer and fluid flow performances of Therminol liquid phase heat transfer fluid.

Key words: Ribbed tube, Heat transfer fluid, Friction factor, Experiments, Numerical simulations

Weiguo Xu, Guodong Liu, Qinghong Zhang, Shuai Wang, Huilin Lu, Heping Tan. Heat transfer and friction factor of Therminol liquid phase heat transfer fluid in a ribbed tube[J]. , 2017, 25(10): 1343-1351.

参考文献

[1] I.A. Popov, Y.F. Gortyshov, V.V. Olimpiev, Industrial applications of heat transfer enhancement:The modern state of the problem (a review), Therm. Eng. 59(2012) 1-12.
[2] J.W. Ackerman, Pseudoboiling heat transfer to supercritical pressure water in smooth and ribbed tubes, ASME J. Heat Transf. 3(1970) 490-497.
[3] S. Suhara, T. Takahashi, H. Ishikawa, T. Abe, S. Kitamura, Heat Transfer Characteristics to Supercritical Water in Ribbed Tubes, Central Research Institute of Electric Power Industry, Tokyo, Japan, 1982(Report No.:281047).
[4] D.R. Tucakovic, V.D. Stevanovic, T. Zivanovic, A. Jovovic, V.B. Ivanovic, Thermal hydraulic analysis of a steam boiler with rifled evaporating tubes, Appl. Therm. Eng. 27(2007) 509-519.
[5] W.S. Wang, T.K. Chen, Y. Luo, H. Gu, F. Yin, Experimental study of heat transfer of ultra-supercritical pressure water in vertical upward internally ribbed tube, High Technol. Lett. 13(2007) 17-22.
[6] J. Pan, D. Yang, Z. Dong, T. Zhu, Q. Bi, Experimental investigation on heat transfer characteristics of low mass flux rifled tube with upward flow, Int. J. Heat Mass Transf. 54(2011) 2952-2961.
[7] J. Wang, H. Li, B. Guo, S. Yu, Y. Zhang, T. Chen, Investigation of forced convection heat transfer of supercritical pressure water in a vertically upward internally ribbed tube, Nucl. Eng. Des. 239(2009) 1956-1964.
[8] D. Yang, J. Pan, C. Zhou, X. Zhu, Q. Bi, T. Chen, Experimental investigation on heat transfer and frictional characteristics of vertical upward rifled tube in supercritical CFB boiler, Exp. Thermal Fluid Sci. 35(2011) 291-300.
[9] D.L. Gee, R.L. Webb, Forced convection heat transfer in helically rib-roughened tubes, Int. J. Heat Mass Transf. 23(1980) 1127-1136.
[10] J.G. Withers, Tube-side heat transfer and pressure drop for tubes having helical internal ridging with turbulent/transitional flow of single-phase fluid. 1. Singlehelix ridging, Heat Transf. Eng. 2(1980) 48-58.
[11] T.S. Bavigururajan, A.E. Bergles, Development and verification of general correlations for pressure drop and heat transfer in single-phase flow in enhanced tubes, Exp. Thermal Fluid Sci. 13(1996) 55-70.
[12] S.K. Lee, S.H. Chang, Experimental study of post-dryout with R-134a upward flow in smooth tube and rifled tubes, Int. J. Heat Mass Transf. 51(2008) 3153-3163.
[13] L. Cheng, T. Chen, Y. Luo, Flow boiling heat transfer of kerosene inside ribbed tube, ASME Heat Transf. Div. 351(1997) 235-241.
[14] D. Huang, B. Ruan, X. Wu, W. Zhang, G. Xu, Z. Tao, P. Jiang, L. Ma, W. Li, Experimental study on heat transfer of aviation kerosene in a vertical upward tube at supercritical pressures, Chin. J. Chem. Eng. 23(2015) 425-434.
[15] Solutia Inc, Therminol VP1 Heat Transfer Fluids(North America) 1998.
[16] P. Selvakumar, P. Somasundaram, P. Thangavel, Performance study on evacuated tube solar collector using therminol D-12 as heat transfer fluid coupled with parabolic trough, Energy Convers. Manag. 85(2014) 505-510.
[17] Solutia Inc, Therminol Heat Transfer Fluids by Solutia-a Selection Guide, 2001.
[18] Y. Wenhua, E.V. Timofeeva, D. Singh, D.M. France, R.K. Smith, Investigations of heat transfer of copper-in-Therminol 59 nanofluids, Int. J. Heat Mass Transf. 64(2013) 1196-1204.
[19] C. Wang, J. Yang, Y. Ding, Phase transfer based synthesis and thermophysical properties of Au/therminol VP-1 nanofluids, Prog. Nat. Sci. Matter Int. 23(2013) 338-342.
[20] S. Mossaz, J.A. Gruss, S. Ferrouillat, J. Skrzypski, D. Getto, O. Poncelet, P. Berne, Experimental study on the influence of nanoparticle PCM slurry for high temperature on convective heat transfer and energetic performance in a circular tube under imposed heat flux, Appl. Therm. Eng. 81(2015) 388-398.
[21] N. Zheng, P. Liu, F. Shan, J. Liu, Z. Liu, W. Liu, Numerical studies on thermo-hydraulic characteristics of laminar flow in a heat exchanger tube fitted with vortex rods, Int. J. Therm. Sci. 100(2016) 448-456.
[22] J. Guo, A.W. Fan, X.Y. Zhang, W. Liu, A numerical study on heat transfer and friction factor characteristics of laminar flow in a circular tube fitted with center-cleared twisted tape, Int. J. Therm. Sci. 50(2011) 1263-1270.
[23] X.Y. Zhang, Z.C. Liu, W. Liu, Numerical studies on heat transfer and flow characteristics for laminar flow in a tube with multiple regularly spaced twisted tapes, Int. J. Therm. Sci. 58(2012) 157-167.
[24] W. Xu, S. Wang, H. Lu, Q. Wang, Q. Zhang, H.L. Lu, Thermo-hydraulic performance of liquid phase heat transfer fluid (Therminol) in a ribbed tube, Exp. Therm. Fluid Sci. 72(2016) 149-160.
[25] S.J. Kline, F.A. McClintock, Describing uncertainties in single-sample experiments, Mech. Eng. 1(1953) 3-8.
[26] Fluent Inc, FLUENT 6.2 user's Guide, 2005.
[27] Y. Hong, X. Deng, L. Zhang, 3D numerical study on compound heat transfer enhancement of converging-diverging tubes equipped with twin twisted tapes, Chin. J. Chem. Eng. 20(2012) 589-601.
[28] T.H. Shih, W.W. Liou, A. Shabbir, Z. Yang, J. Zhu, A new eddy-viscosity model for high Reynolds number turbulent flows-Model development and validation, Comput. Fluids 24(1995) 227-238.
[29] S.A. Orszag, V. Yakhot, W.S. Flannery, F. Boysan, D. Choudhury, J. Maruzewski, B. Patel, Renormalization group modeling and turbulence simulations, International Conference on Near-Wall Turbulent Flows, Tempe, Arizona, 1993.
[30] X. Tang, D. Zhu, Experimental and numerical study on heat transfer enhancement of a rectangular channel with discontinuous crossed ribs and grooves, Chin. J. Chem. Eng. 20(2012) 220-230.
[31] F. Incropera, P.D. Dewitt, Introduction to Heat Transfer, John Wiley & Sons Inc., 1996
[32] S.K. Verma, B.N. Prasad, Investigation for the optimal thermo-hydraulic performance of artificially roughened solar air heaters, Renew. Energy 20(2000) 19-36.
[33] R.L. Webb, Principles in Enhanced Heat Transfer, John Wiley & Sons, New York, 1994.
[34] A.E. Bergles, A.R. Blumenkrantz, J. Taborek, Performance evaluation criteria for enhanced heat transfer surfaces, ASME J. Heat Transf. 2(1974) 239-243.
[35] Z.Y. Guo, D.Y. Li, B.X. Wang, A novel concept for convective heat transfer enhancement, Int. J. Heat Mass Transf. 41(1998) 2221-2225.
[36] Z.Y. Guo, W.Q. Tao, R.K. Shah, The field synergy (coordination) principle and its applications in enhancing single phase convective heat transfer, Int. J. Heat Mass Transf. 48(2005) 1797-1807.
[37] J.A. Meng, X.G. Liang, Z.X. Li, Field synergy optimization and enhanced heat transfer by multi-longitudinal vortexes flow in tube, Int. J. Heat Mass Transf. 48(2005) 3331-3337.
[38] W. Liu, Z.C. Liu, T.Z. Ming, Z.Y. Guo, Physical quantity synergy in laminar flow field and its application in heat transfer enhancement, Int. J. Heat Mass Transf. 52(2009) 4669-4672.