SCI和EI收录∣中国化工学会会刊

›› 2008, Vol. 16 ›› Issue (5): 805-811.

• • 上一篇    下一篇

Removal of Cd(Ⅱ)by Nanometer AlO(OH)Loaded on Fiberglass with Activated Carbon Fiber Felt as Carrier

刘光辉, 王培培, 刘琼, 韩炜   

  1. College of Physics, Jilin University, Changchun 130021, China
  • 收稿日期:2007-11-05 修回日期:2008-03-12 出版日期:2008-10-28 发布日期:2008-10-28
  • 通讯作者: HAN Wei,E-mail:whan@jlu.edu.cn

Removal of Cd(Ⅱ)by Nanometer AlO(OH)Loaded on Fiberglass with Activated Carbon Fiber Felt as Carrier

LIU Guanghui, WANG Peipei, LIU Qiong, HAN Wei   

  1. College of Physics, Jilin University, Changchun 130021, China
  • Received:2007-11-05 Revised:2008-03-12 Online:2008-10-28 Published:2008-10-28

摘要: A new nanometer material,nanometer AlO(OH)loaded on the fiberglass with activated carbon fibers felt(ACF)as the carrier,was prepared by hydrolytic reaction for the removal of Cd(II)from aqueous solution using column adsorption experiment.As was confirmed by XRD determination,the hydrolysis production loaded on fiberglass was similar to the orthorhombic phase AlO(OH).SEM images showed that AlO(OH)particles were in the form of small aggregated clusters.The Thomas model was applied for estimating the kinetic parameters and the saturated adsorption ability of Cd(II)adsorption on the new adsorbent.The results showed that the maximum adsorption capacity of Cd(Ⅱ)was 128.50 mg·g-1 and 117.86 mg·g-1 for the adsorbent mass of 0.3289 g and the adsorbent mass of 0.2867 g,respectively.The elution experiment result indicated that the adsorbed Cd ions was easily desorbed from the material with 0.1 mol·L-1 HCl solution.Adsorption-desorption cycles showed the feasibility of repeated uses of the composited material.The adsorption capacities were influenced by pH and the initial Cd(Ⅱ) concentration.The amount adsorbed was greatest at pH 6.5 and the initial Cd(Ⅱ)concentration of 0.07 mg·L-1,respectively.Nanometer AlO(OH) played a major role in the adsorption process,whereas the fiberglass and ACF were assistants in the process of removing Cd(Ⅱ).In addition,the adsorption capacities for Cd(II)were obviously reduced from 128.50 mg·g-1 to 64.28 mg·g-1 when Pb ions were present because Pb ions took up more adsorption sites.

关键词: removal, Cd(Ⅱ), nanometer AlO(OH), adsorption and elution, mechanism

Abstract: A new nanometer material,nanometer AlO(OH)loaded on the fiberglass with activated carbon fibers felt(ACF)as the carrier,was prepared by hydrolytic reaction for the removal of Cd(II)from aqueous solution using column adsorption experiment.As was confirmed by XRD determination,the hydrolysis production loaded on fiberglass was similar to the orthorhombic phase AlO(OH).SEM images showed that AlO(OH)particles were in the form of small aggregated clusters.The Thomas model was applied for estimating the kinetic parameters and the saturated adsorption ability of Cd(II)adsorption on the new adsorbent.The results showed that the maximum adsorption capacity of Cd(Ⅱ)was 128.50 mg·g-1 and 117.86 mg·g-1 for the adsorbent mass of 0.3289 g and the adsorbent mass of 0.2867 g,respectively.The elution experiment result indicated that the adsorbed Cd ions was easily desorbed from the material with 0.1 mol·L-1 HCl solution.Adsorption-desorption cycles showed the feasibility of repeated uses of the composited material.The adsorption capacities were influenced by pH and the initial Cd(Ⅱ) concentration.The amount adsorbed was greatest at pH 6.5 and the initial Cd(Ⅱ)concentration of 0.07 mg·L-1,respectively.Nanometer AlO(OH) played a major role in the adsorption process,whereas the fiberglass and ACF were assistants in the process of removing Cd(Ⅱ).In addition,the adsorption capacities for Cd(II)were obviously reduced from 128.50 mg·g-1 to 64.28 mg·g-1 when Pb ions were present because Pb ions took up more adsorption sites.

Key words: removal, Cd(Ⅱ), nanometer AlO(OH), adsorption and elution, mechanism