Improvement of Isomerization Process of Crude Isoamylene with Tertiary-amyl-alcohol Addition

›› 2009, Vol. 17 ›› Issue (5): 761-766.

Improvement of Isomerization Process of Crude Isoamylene with Tertiary-amyl-alcohol Addition

徐泽辉^1,2, 夏蓉晖¹, 郭世卓¹, 范存良¹, 房鼎业²

1. SINOPEC Shanghai Petrochemical Company Limited, Chemical Research Institute, Shanghai 200540, China;
2. Department of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China

收稿日期:2008-12-02 修回日期:2009-08-09 出版日期:2009-10-28 发布日期:2009-10-28
通讯作者: XU Zehui,E-mail:spcxzh@163.com

Improvement of Isomerization Process of Crude Isoamylene with Tertiary-amyl-alcohol Addition

XU Zehui^1,2, XIA Ronghui¹, GUO Shizhuo¹, FAN Cunliang¹, FANG Dingye²

1. SINOPEC Shanghai Petrochemical Company Limited, Chemical Research Institute, Shanghai 200540, China;
2. Department of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China

Received:2008-12-02 Revised:2009-08-09 Online:2009-10-28 Published:2009-10-28

摘要/Abstract

摘要： The present work contributed to a new developed production method for enhancing the quality of isoamylene (IA) by adding a small amount of tertiary amyl alcohol (TAA) to the catalyst of strong acid cation exchange resin.TAA improved the selectivity of 2-methyl-2-butene (2M2B) at a high conversion level for the isomerization of IA.Compared with the other results from the current IA units,the conversion of 2-methyl-1-butene (2M1B),the mass ratio of 2M2B to 2M1B and the selectivity of 2M2B were increased from 0.5474,7.32 and 0.6864 to 0.72,12 and 0.95,respectively,while the dimers content in the products decreased from 4.38% to below 1.0%.Optimized conditions for IA isomerization consisted of temperature between 28 and 33℃ and system pressure of 0.5 MPa,weight hourly space velocity of 8.0 h^-1 with TAA mass fraction of 0.7%-0.9% in raw material.The results in lab supported bases for the developed process in industrial application which was later proved to be successful.In addition,a possible mechanism of the isomerization process was speculated to propose a key step of water formation in the TAA-added isomerization process and a verified experiment was conducted to support this speculation.

关键词: isoamylene, 2-methyl-1-butene, 2-methyl-2-butene, isomerization process, tertiary amyl alcohol

Abstract: The present work contributed to a new developed production method for enhancing the quality of isoamylene (IA) by adding a small amount of tertiary amyl alcohol (TAA) to the catalyst of strong acid cation exchange resin.TAA improved the selectivity of 2-methyl-2-butene (2M2B) at a high conversion level for the isomerization of IA.Compared with the other results from the current IA units,the conversion of 2-methyl-1-butene (2M1B),the mass ratio of 2M2B to 2M1B and the selectivity of 2M2B were increased from 0.5474,7.32 and 0.6864 to 0.72,12 and 0.95,respectively,while the dimers content in the products decreased from 4.38% to below 1.0%.Optimized conditions for IA isomerization consisted of temperature between 28 and 33℃ and system pressure of 0.5 MPa,weight hourly space velocity of 8.0 h^-1 with TAA mass fraction of 0.7%-0.9% in raw material.The results in lab supported bases for the developed process in industrial application which was later proved to be successful.In addition,a possible mechanism of the isomerization process was speculated to propose a key step of water formation in the TAA-added isomerization process and a verified experiment was conducted to support this speculation.

Key words: isoamylene, 2-methyl-1-butene, 2-methyl-2-butene, isomerization process, tertiary amyl alcohol

徐泽辉, 夏蓉晖, 郭世卓, 范存良, 房鼎业. Improvement of Isomerization Process of Crude Isoamylene with Tertiary-amyl-alcohol Addition[J]. , 2009, 17(5): 761-766.

XU Zehui, XIA Ronghui, GUO Shizhuo, FAN Cunliang, FANG Dingye. Improvement of Isomerization Process of Crude Isoamylene with Tertiary-amyl-alcohol Addition[J]. , 2009, 17(5): 761-766.

参考文献

1 Li, Y., “View on development of integrated utilization of C 5 resource from isopentene united plant”, Techno-Economics in Petrochemicals, 23 (1), 57-61 (2007).
2 Mao, W., Wang, X.L., Wang, H., Chang, H.Y., Zhang, X.W., Han, J.Y., “Thermodynamic and kinetic study of tert-amyl methyl ether (TAME) synthesis”, Chemical Engineering and Processing:Process Intensification, 47 ( 5), 761-769 (2008).
3 Katariya, A.M., Kamath, R.S., Mahajani, S.M., Moudgalya, K.M., “Study of non-linear dynamics in reactive distillation for TAME synthesis using equilibrium and non-equilibrium models”, Computer Aided Chemical Engineering, 21, 469-474 (2006).
4 Boz, N., Dogu, T., Murtezaoglu, K., Dogu, G., “Mechanism of TAME and TAEE synthesis from diffuse-reflectance FTIR analysis”, Catalysis Today, 100 (3/4), 419-424 (2005).
5 Kolodziej, A., Jaroszyński, M., Sa acki, W., Orlikowski, W., Fr czek, K., Kl ker, M., Kenig, E.Y., Górak, A., “Catalytic distillation for TAME synthesis with structured catalytic packings”, Chemical Engineering Research and Design, 82 (2), 175-184 (2004).
6 Muhammad, A.A., “Design of extraction column methanol recovery system for the TAME reactive distillation process”, Computer Aided Chemical Engineering, 18, 319-324 (2004).
7 Pääkk nen, P.K., Krause, A.O.I., “Comparative study of TAME synthesis on ion-exchange resin beads and a fibrous ion-exchange catalyst”, Reactive and Functional Polymers, 55 (2), 139-150 (2003).
8 Baur, R., Taylor, R., Krishna, R., “Bifurcation analysis for TAME synthesis in a reactive distillation column:Comparison of pseudohomogeneous and heterogeneous reaction kinetics models”, Chemical Engineering and Processing, 42 (3), 211-221 (2003).
9 Bozga, G., Bumbac, G., Plesu, V., Muja, I., Popescu, C.D., “Modelling and simulation of kinetics and operation for the TAME synthesis by catalytic distillation”, Computer Aided Chemical Engineering, 14, 575-580 (2003).
10 Klöker, M., Kenig, E., Górak, A., Fraczek, K., Salacki, W., Orlikowski, W., “Experimental and theoretical studies of the TAME synthesis by reactive distillation”, Computer Aided Chemical Engineering, 14, 713-718 (2003).
11 Oost, C., Kai, S., Hoffmann, M.U., “Synthesis of tertiary amyl methyl ether (TAME):Equilibrium of the multiple reactions”, Chemical Engineering & Technology, 18 (2), 110-117 (2004).
12 Xie, J.M., Xu, Z.H., “Performance of catalyst for tert-amylmethyl ether decomposition to produce isoamylene”, Modern Chemical Industry, 26 (1), 51-54 (2006).
13 Gustavo, C., Robert, C.M., “Increasing the level of 2-methyl-2-butene in isoamylene”, U.S.Pat., 5073663 (1991).
14 An, Y., Zhu, Z.Z., Liu, H.T., “Process for preparing isopentane containing high content of 2-methyl-2-butene from methyl tertiary amyl ether”, C.N.Pat.,1371894 (2002).
15 Xia, R.H., Tang, Y.J., “Study on isomerization process for crude isoamylene”, Techno-Economics in Petrochemicals, 24 (6), 29-34 (2008).
16 Xu, Z.H., Fang, D.Y., “Dimerization reaction of isobutene”, Progress in Chemistry, 19 (9), 1413-1418 (2007).
17 Honkela, M.L., “Comparison of ion-exchange resin catalysts in the dimerisation of isobutene”, Applied Catalysis A:General, 295 (2), 216-223 (2005).
18 Honkela, M.L., Tuomas, O., Kraus, A.O.I., “Thermodynamics and kinetics of the dehydration of tert-butyl alcohol”, Ind. Eng. Chem. Res., 43, 4060-4065 (2004).
19 Talwalkar, S., Chauhan, M., Aghalayam, P., “Kinetic studies on the dimerization of isobutene with ion-exchange resin in the presence of water as a selectivity enhancer”, Ind. Eng. Chem. Res., 45 (4), 1312-1323 (2006).
20 Haag, W.O., “Oligomerization of isobutylene on cation exchange resins”, Chem. Eng. Progr. Symp. Ser, 63, 140-147 (1967).
21 Honkela, M.L., Krause, A.O.I., “Kinetic modeling of the dimerization of isobutene”, Ind. Eng. Chem. Res., 43, 3251-3260 (2004).

Improvement of Isomerization Process of Crude Isoamylene with Tertiary-amyl-alcohol Addition

Improvement of Isomerization Process of Crude Isoamylene with Tertiary-amyl-alcohol Addition

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价