Inspection Models Considering the Overlapping of Inspection Span and Failure Downtime

Chinese Journal of Chemical Engineering ›› 2012, Vol. 20 ›› Issue (6): 1167-1173.

Inspection Models Considering the Overlapping of Inspection Span and Failure Downtime

张幸福, 陈茂银, 周东华

Tsinghua National Laboratory for Information Science and Technology, Department of Automation, Tsinghua University, Beijing 100084, China

收稿日期:2012-05-08 修回日期:2012-07-16 出版日期:2012-12-28 发布日期:2012-12-28
通讯作者: CHEN Maoyin,E-mail:mychen@mail.tsinghua.edu.cn

Inspection Models Considering the Overlapping of Inspection Span and Failure Downtime

ZHANG Xingfu, CHEN Maoyin, ZHOU Donghua

Tsinghua National Laboratory for Information Science and Technology, Department of Automation, Tsinghua University, Beijing 100084, China

Received:2012-05-08 Revised:2012-07-16 Online:2012-12-28 Published:2012-12-28

摘要/Abstract

摘要： In the literature,many works on determining inspection interval by the delay time concept generally assumed that the time of inspection span and the time of failure renewal are negligible.However,in realistic cases,the above time should not be neglected for both the time itself and its effect.In order to model the effect of the possible overlapping of inspection span with failure downtime on determining the optimal inspection interval,we propose a block-based inspection model for a single component-based on delay time concept.We further compare this model with the age-based model to show the practical sense.The developed models are also demonstrated by numerical examples.

关键词: block based inspection, delay time concept, inspection schedule, maintenance

Abstract: In the literature,many works on determining inspection interval by the delay time concept generally assumed that the time of inspection span and the time of failure renewal are negligible.However,in realistic cases,the above time should not be neglected for both the time itself and its effect.In order to model the effect of the possible overlapping of inspection span with failure downtime on determining the optimal inspection interval,we propose a block-based inspection model for a single component-based on delay time concept.We further compare this model with the age-based model to show the practical sense.The developed models are also demonstrated by numerical examples.

Key words: block based inspection, delay time concept, inspection schedule, maintenance

张幸福, 陈茂银, 周东华. Inspection Models Considering the Overlapping of Inspection Span and Failure Downtime[J]. Chinese Journal of Chemical Engineering, 2012, 20(6): 1167-1173.

ZHANG Xingfu, CHEN Maoyin, ZHOU Donghua. Inspection Models Considering the Overlapping of Inspection Span and Failure Downtime[J]. Chin.J.Chem.Eng., 2012, 20(6): 1167-1173.

参考文献

1 Scarf,P.A.,Cavalcante,C.A.V.,"Modelling quality in replacement and inspection maintenance",Int.J.Prod.Econom.,135 (1),72-381 (2012).
2 Cho,D.,Parlar,M.,"A survey of maintenance models of multi-unit systems",Eur.J.Operat.Res.,51 (1),1-23 (1991).
3 Wang,H.,"A survey of maintenance policies of deteriorating systems",Eur.J.Operat.Res.,139 (3),249-489 (2002).
4 Christer,A.H.,Waller,W.M.,"Reducing production cost using delay time analysis",J.Operat.Res.Soc.,5 (3),499-512 (1984).
5 Christer,A.H.,Wang,W.,Baker,R.D.,Sharp,J.M.,"Modelling maintenance practice of production plant using the delay-time concept",IMA J.Manag.Maths.,6 (1),67-83 (1995).
6 Christer,A.H.,Wang,W.,Choi,K.,Sharp,J.M.,"The delay-time modelling of preventive maintenance of plant given limited PM data and selective repair at PM",IMA J.Maths.Applied in Bus.Indust.,9 (4),355-379 (1998).
7 Pillay,A.,Wang,J.,Wall,A.D.,Ruxton,T.,"A maintenance study of fishing vessel equipment using delay-time analysis",Journal of Quality in Maintenance Engineering,7 (2),118-128 (2001).
8 Akbarov,A.,Wang,W.,Christer,A.H.,"Problem identification in the frame of maintenance modelling: a case study",Int.J.Prod.Res.,46 (4),1031-1046 (2008).
9 Jones,B.,Jenkinson,I.,Wang,J.,"Methodology of using delay time analysis for a manufacturing industry",Reliab.Eng.Syst.Safe.,94 (4),111-124 (2009).
10 Wang,W.,"A joint spare part and maintenance inspection optimization model using the delay-time concept",Reliab.Eng.Syst.Safe.,96 (11),1535-1541 (2011).
11 Baker,R.,Wang,W.,"Determining the delay time distribution of faults in repairable machinery from failure data",IMA J.Maths.Applied in Bus.Indust.,3 (4),259-282 (1991).
12 Wang,W.,"An inspection model for a process with two types of inspection and repairs",Reliab.Eng.Syst.Safe.,94 (2),526-533 (2008).
13 Rodrigo,J.P.,Ferreira,A.T.,Cavalcante,A.V.,"A multi-criteria decision model to determine inspection intervals of condition monitoring based on delay time analysis",Reliab.Eng.Syst.Safe.,94 (5),905-912 (2009).
14 Wang,W.,Banjevic,D.,Pecht,M.,"A multi-component and multi-failure mode inspection model based on the delay time concept",Reliab.Eng.Syst.Safe.,95 (8),912-920 (2010).
15 Wang,W.,"An inspection model based on a three-stage failure process",Reliab.Eng.Syst.Safe.,96 (7),838-848 (2011).
16 Scarf,P.A.,Cavalcante,C.A.V.,"Hybrid block replacement and inspection policies for a muti-component system with heterogeneous component lives",Eur.J.Operat.Res.,206 (3),384-394 (2010).
17 Wang,W.B.,Lu,X.F.,Zhou,D.H.,"Age and block based inspection based on the delay time concept",In: The Seventh International Conference on Mathematical Methods in Reliability (MMR2011)—Theory,Methods,and Applications,Beijing,727-734 (2011).

Inspection Models Considering the Overlapping of Inspection Span and Failure Downtime

Inspection Models Considering the Overlapping of Inspection Span and Failure Downtime

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价