Estimation of Formation Enthalpies of Organic Pollutants from a New Structural Group Contribution Method

doi:10.1016/S1004-9541(13)60517-0

Chinese Journal of Chemical Engineering ›› 2013, Vol. 21 ›› Issue (6): 644-653.DOI: 10.1016/S1004-9541(13)60517-0

Estimation of Formation Enthalpies of Organic Pollutants from a New Structural Group Contribution Method

Mehdi Bagheri¹, Afshin Bakhtiari², Masoume Jaberi³

1 Young Researchers Club, Islamic Azad University, Science and Research Branch, Tehran 1477893855, Iran;
2 Tehran Naftoon Arya Eng. Co., Jahanmehr St., Fatemi Sq., Tehran 1581768516, Iran;
3 Department of Chemical Engineering, University of Tehran, Tehran 1136514563, Iran

收稿日期:2012-12-07 修回日期:2012-04-30 出版日期:2013-06-28 发布日期:2013-07-03
通讯作者: Mehdi Bagheri
基金资助:
Supported by the “Tehran Naftoon Arya Eng. Co.” research committee of Iran.

Estimation of Formation Enthalpies of Organic Pollutants from a New Structural Group Contribution Method

Mehdi Bagheri¹, Afshin Bakhtiari², Masoume Jaberi³

1 Young Researchers Club, Islamic Azad University, Science and Research Branch, Tehran 1477893855, Iran;
2 Tehran Naftoon Arya Eng. Co., Jahanmehr St., Fatemi Sq., Tehran 1581768516, Iran;
3 Department of Chemical Engineering, University of Tehran, Tehran 1136514563, Iran

Received:2012-12-07 Revised:2012-04-30 Online:2013-06-28 Published:2013-07-03
Contact: Mehdi Bagheri
Supported by:
Supported by the “Tehran Naftoon Arya Eng. Co.” research committee of Iran.

摘要/Abstract

摘要： Chemical stability and reactivity of organic pollutants is dependent to their formation enthalpies. The main objective of this study is to provide simple straightforward strategy for prediction of the formation enthalpies of wide range organic pollutants only from their structural functional groups. Using such an extended dataset comprising 1694 organic chemicals from 77 diverse material classes benefits the generalizability and reliability of the study. The new suggested collection of 12 functional groups and a simple linear regression lead to promising statistics of R²=0.958, Q_Loo²=0.956, and δ_AEE=57 kJ·mol^-1 for the whole dataset. Moreover, unknown experimental formation enthalpies for 27 organic pollutants are estimated by the presented approach. The resultant model needs no technical software/calculations, and thus can be easily applied by a non-specialist user.

关键词: organic pollutants, enthalpy of formation (&Delta, H_f^&theta, ), structural group contribution (SGC), molecular based modeling

Abstract: Chemical stability and reactivity of organic pollutants is dependent to their formation enthalpies. The main objective of this study is to provide simple straightforward strategy for prediction of the formation enthalpies of wide range organic pollutants only from their structural functional groups. Using such an extended dataset comprising 1694 organic chemicals from 77 diverse material classes benefits the generalizability and reliability of the study. The new suggested collection of 12 functional groups and a simple linear regression lead to promising statistics of R²=0.958, Q_Loo²=0.956, and δ_AEE=57 kJ·mol^-1 for the whole dataset. Moreover, unknown experimental formation enthalpies for 27 organic pollutants are estimated by the presented approach. The resultant model needs no technical software/calculations, and thus can be easily applied by a non-specialist user.

Key words: organic pollutants, enthalpy of formation (&Delta, H_f^&theta, ), structural group contribution (SGC), molecular based modeling

Mehdi Bagheri, Afshin Bakhtiari, Masoume Jaberi. Estimation of Formation Enthalpies of Organic Pollutants from a New Structural Group Contribution Method[J]. Chinese Journal of Chemical Engineering, 2013, 21(6): 644-653.

Mehdi Bagheri, Afshin Bakhtiari, Masoume Jaberi. Estimation of Formation Enthalpies of Organic Pollutants from a New Structural Group Contribution Method[J]. Chin.J.Chem.Eng., 2013, 21(6): 644-653.

参考文献

1 Wang, X.B., Tian, D.C., Wang. L.L., “The electronic structure and chemical stability of the AlB2-type transition-metal diborides”, J. Phys.: Condens. Matter., 6, 10185-10192 (1994).

2 Nahas, A.M.E., Navarro, M.V., Simmie, J.M., Bozzelli, J.W., Curran, H.J., Dooley, S., Metcalfe, W., “Enthalpies of formation, bond dissociation energies and reaction paths for the decomposition of model biofuels: Ethyl propanoate and methyl butanoate”, J. Phys. Chem. A, 111, 3727-3739 (2007).

3 Franklin, J.L., Field, F.H., “The resonance energies of certain organic free radicals and ions”, J. Am. Chem. Soc., 75, 2819-2821(1953).

4 Holdiness, M.R., “Heats of atomization and resonance energy of some ortho-substituted benzoic acids”, Thermochim. Acta., 71, 257-263 (1983).

5 Gutowski, K.E., Rogers, R.D., Dixon, D.A., “Accurate thermochemical properties for energetic materials applications. I. Heats of formation of nitrogen-containing heterocycles and energetic precursor molecules from electronic structure theory”, J. Phys. Chem. A, 110, 11890-11897 (2006).

6 Himmelblau, D.M., Riggs, J. B., Basic Principles and Calculations in Chemical Engineering, Prentice-Hall, New Jersey (2003).

7 Gans, P., Sabatini, A., Vacca, A., “Simultaneous calculation of equilibrium constants and standard formation enthalpies from calorimetric data for systems with multiple equilibria in solution”, J. Solution Chem., 37, 467-476 (2008).

8 Andersen, K., “Practical calculation of the equilibrium constant and the enthalpy of reaction at different temperatures”, J. Chem. Educ., 71, 474-479 (1994).

9 Brigham Young University, Design Institute for Physical Properties (DIPPR^? 801), AIChE, Provo (2010).

10 Goodwin, A.R.H., Marsh, K.N., Wakeham, W.A., Measurement of the Thermodynamic Properties of Single Phases, Elsevier, Netherland (2003).

11 Gharagheizi, F., Bagheri, M., “A simple QSPR model for prediction of flash point temperature of pure organic compounds”, In: Proceedings of Third International Conference on Thermal Engineering, Amman, Jordan (2007).

12 Bagheri, M., Bagheri, M., Heidaria, F., Fazeli, A., “Nonlinear molecular based modeling of the flash point for application in inherently safer design”, J. Loss Prev. Process Ind., 25, 40-51 (2012).

13 Bagheri, M., Rajabi, M. Mirbagheria, M., Amin, M., “BPSO-MLR and ANFIS based modeling of lower flammability limit”, J. Loss Prev. Process Ind., 25, 373-382 (2012).

14 Bagheri, M., Golbraikh, A.“Rank based ant system method for nonlinear QSAR studies: QSAR study of the Solubility Parameters” SAR QSAR Environ. Res., 23, 59-86 (2012).

15 Fazeli, A., Bagheri, M., Ghaniyari-Benis, S., Aslebagh, R., Kamaloo, E., “Prediction of absolute entropy of ideal gas at 298 K of pure chemicals through GAMLR and FFNN”, Energ. Convers. Manage., 52, 630-634 (2011).

16 Brothers, E.N., Izmaylov, A.F., Rusakov, A.A., Scuseria, G.E., “On calculating a polymer’s enthalpy of formation with quantum chemical methods”, J. Phys. Chem. B, 111, 13869-13872 (2007).

17 Dixon, D.A., Peterson, K.A., “Heats of formation of CCl and CCl₂ from ab initio quantum chemistry”, J. Chem. Phys., 115, 6327-6329 (2001).

18 Vatani, A., Mehrpooya, M., Gharagheizi, F., “Prediction of standard enthalpy of formation by a QSPR model”, Int. J. Mol. Sci., 8, 407-432 (2007).

19 Castro, E.A., Fernandez, F.M., Duchowicz, P.R., “QSPR modeling of the enthalpy of formation based on partial order ranking”, J. Math. Chem., 37, 433-441 (2005).

20 Jover, J., Bosque, R., Sim?es, J.A.M., Sales, J., “Estimation of enthalpies of formation of organometallic compounds from their molecular structures”, J. Org. Chem., 693, 1261-1268 (2008).

21 Bagheri, M., Yerramsetty, K.M., Neely, B.J., Gasem, K.A.M., “Theory-based quantitative structure-property relationship models for standard heat of formation predictions”, In: Proceedings of AIChE Annual Meeting, UT (2010).

22 Constantinou, L., Gani, R., “New group contribution method for estimating properties of pure compound”, AIChE J., 40, 1697-1710 (1994).

23 Marrero, J., Gani, R., “Group-contribution based estimation of pure component properties”, Fluid Phase Equilib., 183/184, 183-208 (2001).

24 Qiang, W., Peisheng, M., Shifeng, N., “Position group contribution method for estimation of melting point of organic compounds”, Chin. J. Chem. Eng., 17, 468-472 (2009).

25 Lazzús, J.A., “Prediction of flash point temperature of organic compounds using a hybrid method of group contribution?+?neural network?+?particle swarm optimization”, Chin. J. Chem. Eng., 18, 817-823 (2010).

26 ASPEN PLUS Reference Manual, 2001. Part Number: Aspen Physical Property System 11.1, Aspen Technology, Cambridge, MA.

27 Satyro, M.A., “Thermodynamics and the simulation engineer”, Chem. Prod. Process Model., 3, 1-41 (2008).

28 Todeschini, R., Consonni, V., Molecular Descriptors for Chemoinformatics, Wiley, Germany 2009.

29 Gharagheizi, F., Alamdari, R. F., Angaji, M. T., “A new neural network-group contribution method for estimation of flash point”, Energy Fuels., 22, 1628-1635 (2008).

30 Gharagheizi, F., “A new group contribution-based method for estimation of lower flammability limit of pure compounds”, J. Hazard Mater., 170, 595-604 (2009).

31 Gharagheizi, F., Abbasi, R., Tirandazi, B., “Prediction of Henry’s law constant of organic compounds in water from a new group-contribution- based model”, Ind. Eng. Chem. Res., 49, 10149-10152 (2010).

32 SPSS Inc., PASW Statistics for Windows, 18th edition, SPPSS Inc., Chicago (2009).

33 Anderson, T., An Introduction to Multivariate Statistical Analysis, 3rd Ed., Wiley, New York, 2003.

34 Bagheri, M., Nejad Ghaffar Borhani, T., Zahedi, G.,“Estimation of flash point and autoignition temperature of organic sulfur chemicals”, Energy Convers. Manage., 58, 185-196 (2012).

35 Bagheri, M., Bagheri, M., Gandomi, A.H, Golbraikh, A., “Simple yet accurate prediction method for sublimation enthalpies of organic contaminants”, Thermochim. Acta., 543, 96-106 (2012).

36 Bagheri, M., Yerramsetty, K.M., Neely, B.J., Gasem, K.A.M., “Molecular modeling of the standard state heat of formation”, Energy Convers. Manage., 65, 587-596 (2013)

37 Bagheri, M., Bagheri, M., Gandomi, A. H., Shahbaznezhad, M., “Multi expression programming based model for prediction of formation enthalpies of nitro-energetic materials”, Expert Systems, 30, 66-78 (2012).

38 Kasabov, N.K., Foundations of Neural Networks Fuzzy Systems and Knowledge Engineering, MIT Press, Cambridge (1998).

39 Golbraikh, A., Tropsha, A., “Beware of q²!”, J. Molecul. Graph. Model., 20, 269-276 (2002).

40 Roy, P.P., Roy, K., “On some aspects of variable selection for partial least squares regression models”, QSAR Comb. Sci., 27, 302-313 (2008).

41 Bagheri, M., Yerramsetty, K.M., Neely, B.J., Gasem, K.A.M., “A new auto-ignition temperature model for pure hydrocarbons”, In: Proceedings of AIChE Annual Meeting, Minneapolis, MN (2011).

42 Bagheri, M., Yerramsetty, K.M., Neely, B.J., Gasem, K.A.M., “Improved nonlinear models for the refractive index (RI) of organic and inorganic materials”, In: Proceedings of AIChE Annual Meeting, Minneapolis, MN (2011).

[1]	Ling Xu, Ji Li, Wenbin Zeng, Kai Liu, Yibing Ma, Liping Fang, Chenlu Shi. Surfactant-assisted removal of 2,4-dichlorophenol from soil by zero-valent Fe/Cu activated persulfate[J]. 中国化学工程学报, 2022, 44(4): 447-455.
[2]	Wei Zhou, Xiaoxiao Meng, Liang Xie, Junfeng Li, Yani Ding, Yanlin Su, Jihui Gao, Guangbo Zhao. Simultaneous utilization of electro-generated O₂ and H₂ for H₂O₂ production: An upgrade of the Pd-catalytic electro-Fenton process for pollutants degradation[J]. 中国化学工程学报, 2022, 44(4): 363-368.
[3]	Hongbing Song, Lei Liu, Bingxiao Feng, Haozhong Wang, Meng Xiao, Hengjun Gai, Yubao Tang, Xiaofei Qu, Tingting Huang. Modified g-C₃N₄ derived from ionic liquid and urea for promoting visible-light photodegradation of organic pollutants[J]. 中国化学工程学报, 2021, 40(12): 293-303.

Estimation of Formation Enthalpies of Organic Pollutants from a New Structural Group Contribution Method

Estimation of Formation Enthalpies of Organic Pollutants from a New Structural Group Contribution Method

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

本文评价