SCI和EI收录∣中国化工学会会刊

›› 2015, Vol. 23 ›› Issue (10): 1593-1602.DOI: 10.1016/j.cjche.2015.07.010

• 流体力学与传递现象 • 上一篇    下一篇

Pore-scale study based on lattice Boltzmann method of density driven natural convection during CO2 injection project

Abdelmalek Atia1,2, Kamal Mohammedi1   

  1. 1 Univ. Boumerdes, LEMI Lab, Algeria;
    2 Univ. El-Oued, LEVRES Lab, Algeria
  • 收稿日期:2014-09-01 修回日期:2015-07-08 出版日期:2015-10-28 发布日期:2015-11-27
  • 通讯作者: Abdelmalek Atia

Pore-scale study based on lattice Boltzmann method of density driven natural convection during CO2 injection project

Abdelmalek Atia1,2, Kamal Mohammedi1   

  1. 1 Univ. Boumerdes, LEMI Lab, Algeria;
    2 Univ. El-Oued, LEVRES Lab, Algeria
  • Received:2014-09-01 Revised:2015-07-08 Online:2015-10-28 Published:2015-11-27

摘要: Saline aquifers are chosen for geological storage of greenhouse gas CO2 because of their storage potential. In almost all cases of practical interest, CO2 is present on top of the liquid and CO2 dissolution leads to a small increase in the density of the aqueous phase. This situation results in the creation of negative buoyancy force for downward density-driven natural convection and consequently enhances CO2 sequestration. In order to study CO2 injection at pore-level, an isothermal Lattice Boltzmann Model (LBM)with two distribution functions is adopted to simulate density-driven natural convection in porous media with irregular geometry obtained by image treatment. The present analysis showed that after the onset of natural convection instability, the brine with a high CO2 concentration infringed into the underlying unaffected brine, in favor of the migration of CO2 into the pore structure. With low Rayleigh numbers, the instantaneous mass flux and total dissolved CO2 mass are very close to that derived from penetration theory (diffusion only), but the fluxes are significantly enhanced with high Ra number. The simulated results show that as the time increases, some chaotic and recirculation zones in the flow appear obviously, which promotes the renewal of interfacial liquid, and hence enhances dissolution of CO2 into brine. This study is focused on the scale of a few pores, but shows implications in enhanced oil/gas recovery with CO2 sequestration in aquifers.

关键词: Lattice Boltzmann method, Density driven, Pore-scale, CO2, Mass, transfer

Abstract: Saline aquifers are chosen for geological storage of greenhouse gas CO2 because of their storage potential. In almost all cases of practical interest, CO2 is present on top of the liquid and CO2 dissolution leads to a small increase in the density of the aqueous phase. This situation results in the creation of negative buoyancy force for downward density-driven natural convection and consequently enhances CO2 sequestration. In order to study CO2 injection at pore-level, an isothermal Lattice Boltzmann Model (LBM)with two distribution functions is adopted to simulate density-driven natural convection in porous media with irregular geometry obtained by image treatment. The present analysis showed that after the onset of natural convection instability, the brine with a high CO2 concentration infringed into the underlying unaffected brine, in favor of the migration of CO2 into the pore structure. With low Rayleigh numbers, the instantaneous mass flux and total dissolved CO2 mass are very close to that derived from penetration theory (diffusion only), but the fluxes are significantly enhanced with high Ra number. The simulated results show that as the time increases, some chaotic and recirculation zones in the flow appear obviously, which promotes the renewal of interfacial liquid, and hence enhances dissolution of CO2 into brine. This study is focused on the scale of a few pores, but shows implications in enhanced oil/gas recovery with CO2 sequestration in aquifers.

Key words: Lattice Boltzmann method, Density driven, Pore-scale, CO2, Mass, transfer