From pollutant to solution of wastewater pollution: Synthesis of activated carbon from textile sludge for dye adsorption

doi:10.1016/j.cjche.2017.07.015

摘要/Abstract

摘要： Adsorption is an important process in wastewater treatment, and conversion of waste materials to adsorbent offers a solution to high material cost related to the use of commercial activated carbon. This study investigated the adsorption behaviour of Reactive Black 5 (RB5) and methylene blue (MB) onto activated carbon produced from textile sludge (TSAC). The activated carbon was synthesized through chemical activation of precursor followed with carbonization at 650℃ under nitrogen flow. Effects of time (0-200 min), pH (2-10), temperature (25-60℃), initial dye concentration (0-200 mg·L^-1), and adsorbent dosage (0.01-0.15 g) on dye removal efficiency were investigated. Preliminary screening revealed that TSAC synthesized via H₂SO₄ activation showed higher adsorption behaviour than TSAC activated by KCl and ZnCl₂. The adsorption capacity of TSAC was found to be 11.98 mg·g^-1 (RB5) and 13.27 mg·g^-1 (MB), and is dependent on adsorption time and initial dye concentration. The adsorption data for both dyes were well fitted to Freundlich isotherm model which explains the heterogeneous nature of TSAC surface. The dye adsorption obeyed pseudo-second order kinetic model, thus chemisorption was the controlling step. This study reveals potential of textile sludge in removal of dyes from aqueous solution, and further studies are required to establish the applicability of the synthesized adsorbent for the treatment of waste water containing toxic dyes from textile industry.

关键词: Activated carbon, Textile sludge, Reactive Black 5, Methylene blue, Adsorption

Abstract: Adsorption is an important process in wastewater treatment, and conversion of waste materials to adsorbent offers a solution to high material cost related to the use of commercial activated carbon. This study investigated the adsorption behaviour of Reactive Black 5 (RB5) and methylene blue (MB) onto activated carbon produced from textile sludge (TSAC). The activated carbon was synthesized through chemical activation of precursor followed with carbonization at 650℃ under nitrogen flow. Effects of time (0-200 min), pH (2-10), temperature (25-60℃), initial dye concentration (0-200 mg·L^-1), and adsorbent dosage (0.01-0.15 g) on dye removal efficiency were investigated. Preliminary screening revealed that TSAC synthesized via H₂SO₄ activation showed higher adsorption behaviour than TSAC activated by KCl and ZnCl₂. The adsorption capacity of TSAC was found to be 11.98 mg·g^-1 (RB5) and 13.27 mg·g^-1 (MB), and is dependent on adsorption time and initial dye concentration. The adsorption data for both dyes were well fitted to Freundlich isotherm model which explains the heterogeneous nature of TSAC surface. The dye adsorption obeyed pseudo-second order kinetic model, thus chemisorption was the controlling step. This study reveals potential of textile sludge in removal of dyes from aqueous solution, and further studies are required to establish the applicability of the synthesized adsorbent for the treatment of waste water containing toxic dyes from textile industry.

Key words: Activated carbon, Textile sludge, Reactive Black 5, Methylene blue, Adsorption

Syieluing Wong, Nurul Atiqah Najlaa Yac'cob, Norzita Ngadi, Onn Hassan, Ibrahim M. Inuwa. From pollutant to solution of wastewater pollution: Synthesis of activated carbon from textile sludge for dye adsorption[J]. Chinese Journal of Chemical Engineering, 2018, 26(4): 870-878.

参考文献

[1] N. Remmas, P. Melidis, G. Paschos, E. Statiris, S. Ntougias, Protozoan indicators and extracellular polymeric substances alterations in an intermittently aerated membrane bioreactor treating mature landfill leachate, Environ. Technol. 38(1) (2017) 53-64.

[2] R. Poblete, I. Oller, M.I. Maldonado, Y. Luna, E. Cortes, Cost estimation of COD and color removal from landfill leachate using combined coffee-waste based activated carbon with advanced oxidation processes, J. Environ. Chem. Eng. 5(1) (2017) 114-121.

[3] X.H. Duan, C. Srinivasakannan, X. Wang, F. Wang, X.Y. Liu, Synthesis of activated carbon fibers from cotton by microwave induced H₃PO₄ activation, J. Taiwan Inst. Chem. Eng. 70(2017) 374-381.

[4] T. Robinson, G. McMullan, R. Marchant, P. Nigam, Remediation of dyes in textile effluent:a critical review on current treatment technologies with a proposed alternative, Bioresour. Technol. 77(3) (2001) 247-255.

[5] M. Yusuf, M.A. Khan, M. Otero, E.C. Abdullah, M. Hosomi, A. Terada, S. Riya, Synthesis of CTAB intercalated graphene and its application for the adsorption of AR265 and AO7 dyes from water, J. Colloid Interface Sci. 493(2017) 51-61.

[6] M. Oz, D.E. Lorke, M. Hasan, G.A. Petroianu, Cellular and molecular actions of Methylene Blue in the nervous system, Med. Res. Rev. 31(1) (2011) 93-117.

[7] R. Pradhananga, L. Adhikari, R. Shrestha, M. Adhikari, R. Rajbhandari, K. Ariga, L. Shrestha, Wool carpet dye adsorption on nanoporous carbon materials derived from agro-product, J. Carbon Res. 3(2) (2017) 12.

[8] A.A. Spagnoli, D.A. Giannakoudakis, S. Bashkova, Adsorption of methylene blue on cashew nut shell based carbons activated with zinc chloride:the role of surface and structural parameters, J. Mol. Liq. 229(2017) 465-471.

[9] G. Orlandi, J. Cavasotto, F.R. Machado Jr., G.L. Colpani, J.D. Magro, F. Dalcanton, J.M. Mello, M.A. Fiori, An adsorbent with a high adsorption capacity obtained from the cellulose sludge of industrial residues, Chemosphere 169(2017) 171-180.

[10] E.V. Rosa, L. Mater, M.M. Souza-Sierra, L.R. Rorig, L.M. Vieira, C.M. Radetski, Textile sludge application to non-productive soil:physico-chemical and phytotoxicity aspects, Ecotoxicol. Environ. Saf. 68(1) (2007) 91-97.

[11] E. Kacan, C. Kutahyali, Adsorption of strontium from aqueous solution using activated carbon produced from textile sewage sludges, J. Anal. Appl. Pyrolysis 97(2012) 149-157.

[12] K.S.A. Sohaimi, N. Ngadi, H. Mat, I.M. Inuwa, S. Wong, Synthesis, characterization and application of textile sludge biochars for oil removal, J. Environ. Chem. Eng. 5(2) (2017) 1415-1422.

[13] E. Kacan, Optimum BET surface areas for activated carbon produced from textile sewage sludges and its application as dye removal, J. Environ. Manag. 166(2016) 116-123.

[14] F. Rozada, M. Otero, A. Moran, A.I. Garcia, Activated carbons from sewage sludge and discarded tyres:production and optimization, J. Hazard. Mater. 124(1-3) (2005) 181-191.

[15] B. Stuart, Infrared spectroscopy, Kirk-Othmer Encyclopedia of Chemical Technology, John Wiley & Sons Inc., 2000

[16] S. Wong, N. Ngadi, T.A.T. Abdullah, I.M. Inuwa, Catalytic cracking of LDPE dissolved in benzene using nickel-impregnated zeolites, Ind. Eng. Chem. Res. 55(9) (2016) 2543-2555.

[17] Y.S. Ho, G. McKay, A two-stage batch sorption optimized design for dye removal to minimize contact time, Process Saf. Environ. 76(B4) (1998) 313-318.

[18] M. Fatiha, B. Belkacem, Adsorption of methylene blue from aqueous solutions using natural clay, J. Mater. Environ. Sci. 7(1) (2016) 285-292.

[19] M.A. Ahmad, R. Alrozi, Removal of malachite green dye from aqueous solution using rambutan peel-based activated carbon:equilibrium, kinetic and thermodynamic studies, Chem. Eng. J. 171(2) (2011) 510-516.

[20] J. Febrianto, A.N. Kosasih, J. Sunarso, Y.H. Ju, N. Indraswati, S. Ismadji, Equilibrium and kinetic studies in adsorption of heavy metals using biosorbent:a summary of recent studies, J. Hazard. Mater. 162(2-3) (2009) 616-645.

[21] K.Y. Foo, B.H. Hameed, Coconut husk derived activated carbon via microwave induced activation:effects of activation agents, preparation parameters and adsorption performance, Chem. Eng. J. 184(2012) 57-65.

[22] M.A. Martin-Lara, I.L.R. Rico, I.D.A. Vicente, G.B. Garcia, M.C. de Hoces, Modification of the sorptive characteristics of sugarcane bagasse for removing lead from aqueous solutions, Desalination 256(1-3) (2010) 58-63.

[23] I.A. Aguayo-Villarreal, A. Bonilla-Petriciolet, R. Muniz-Valencia, Preparation of activated carbons from pecan nutshell and their application in the antagonistic adsorption of heavy metal ions, J. Mol. Liq. 230(2017) 686-695.

[24] S. Alvarez-Torrellas, M. Martin-Martinez, H.T. Gomes, G. Ovejero, J. Garcia, Enhancement of p-nitrophenol adsorption capacity through N₂-thermal-based treatment of activated carbons, Appl. Surf. Sci. 414(2017) 424-434.

[25] K.M. Smith, G.D. Fowler, S. Pullket, N.J. Graham, Sewage sludge-based adsorbents:a review of their production, properties and use in water treatment applications, Water Res. 43(10) (2009) 2569-2594.

[26] S.H. Md Arshad, N. Ngadi, A.A. Aziz, N.S. Amin, M. Jusoh, S. Wong, Preparation of activated carbon from empty fruit bunch for hydrogen storage, J. Energy Storage 8(2016) 257-261.

[27] N.V. Farinella, G.D. Matos, M.A. Arruda, Grape bagasse as a potential biosorbent of metals in effluent treatments, Bioresour. Technol. 98(10) (2007) 1940-1946.

[28] B. Nabgan, W. Nabgan, T.A. Tuan Abdullah, M. Tahir, Y. Gambo, M. Ibrahim, W. Syie Luing, Parametric study on the steam reforming of phenol-PET solution to hydrogen production over Ni promoted on Al₂O₃-La₂O₃ catalyst, Energy Convers. Manag. 142(2017) 127-142.

[29] I.M. Inuwa, R. Arjmandi, A.N. Ibrahim, M.K.M. Haafiz, S.L. Wong, K. Majeed, A. Hassan, Enhanced mechanical and thermal properties of hybrid graphene nanoplatelets/multiwall carbon nanotubes reinforced polyethylene terephthalate nanocomposites, Fiber Polym. 17(10) (2016) 1657-1666.

[30] B.A. Marekha, K. Sonoda, T. Uchida, T. Tokuda, A. Idrissi, T. Takamuku, ATR-IR spectroscopic observation on intermolecular interactions in mixtures of imidazoliumbased ionic liquids CnmimTFSA (n=2-12) with DMSO, J. Mol. Liq. 232(2017) 431-439.

[31] C.-L. Huang, Y.-J. Wang, Y.-C. Fan, C.-L. Hung, Y.-C. Liu, The effect of geometric factor of carbon nanofillers on the electrical conductivity and electromagnetic interference shielding properties of poly(trimethylene terephthalate) composites:a comparative study, J. Mater. Sci. 52(5) (2016) 2560-2580.

[32] E. Altintig, H. Altundag, M. Tuzen, A. Sari, Effective removal of methylene blue from aqueous solutions using magnetic loaded activated carbon as novel adsorbent, Chem. Eng. Res. Des. 122(2017) 151-163.

[33] G. Wendimu, F. Zewge, E. Mulugeta, Aluminium-iron-amended activated bamboo charcoal (AIAABC) for fluoride removal from aqueous solutions, J. Water Process Eng. 16(2017) 123-131.

[34] W.H. Li, Q.Y. Yue, B.Y. Gao, Z.H. Ma, Y.J. Li, H.X. Zhao, Preparation and utilization of sludge-based activated carbon for the adsorption of dyes from aqueous solutions, Chem. Eng. J. 171(1) (2011) 320-327.

[35] M. Greluk, Z. Hubicki, Kinetics, isotherm and thermodynamic studies of Reactive Black 5 removal by acid acrylic resins, Chem. Eng. J. 162(3) (2010) 919-926.

[36] A.E. Pirbazari, E. Saberikhah, M. Badrouh, M.S. Emami, Alkali treated Foumanat tea waste as an efficient adsorbent for methylene blue adsorption from aqueous solution, Water Resour. Ind. 6(2014) 64-80.

[37] F. Rozada, L.F. Calvo, A.I. Garcia, J. Martin-Villacorta, M. Otero, Dye adsorption by sewage sludge-based activated carbons in batch and fixed-bed systems, Bioresour. Technol. 87(3) (2003) 221-230.

[38] M.Y. Chang, R.S. Juang, Adsorption of tannic acid, humic acid, and dyes from water using the composite of chitosan and activated clay, J. Colloid Interface Sci. 278(1) (2004) 18-25.

[39] Z. Aly, A. Graulet, N. Scales, T. Hanley, Removal of aluminium from aqueous solutions using PAN-based adsorbents:characterisation, kinetics, equilibrium and thermodynamic studies, Environ. Sci. Pollut. Res. Int. 21(5) (2014) 3972-3986.

[40] S. Dawood, T.K. Sen, Removal of anionic dye Congo red from aqueous solution by raw pine and acid-treated pine cone powder as adsorbent:equilibrium, thermodynamic, kinetics, mechanism and process design, Water Res. 46(6) (2012) 1933-1946.

[41] N.K. Lazaridis, D.D. Asouhidou, Kinetics of sorptive removal of chromium(VI) from aqueous solutions by calcined Mg-Al-CO(3) hydrotalcite, Water Res. 37(12) (2003) 2875-2882.

[42] E. Inam, U.J. Etim, E.G. Akpabio, S.A. Umoren, Process optimization for the application of carbon from plantain peels in dye abstraction, J. Taibah Univ. Sci. 11(1) (2017) 173-185.

[43] M.A. Islam, S. Sabar, A. Benhouria, W.A. Khanday, M. Asif, B.H. Hameed, Nanoporous activated carbon prepared from karanj (Pongamia pinnata) fruit hulls for methylene blue adsorption, J. Taiwan Inst. Chem. Eng. 74(2017) 96-104.

[44] H. Xiao, H. Peng, S. Deng, X. Yang, Y. Zhang, Y. Li, Preparation of activated carbon from edible fungi residue by microwave assisted K₂CO₃ activation-application in reactive black 5 adsorption from aqueous solution, Bioresour. Technol. 111(2012) 127-133.

[45] S. Rio, L. Le Coq, C. Faur, D. Lecomte, P. Le Cloirec, Preparation of adsorbents from sewage sludge by steam activation for industrial emission treatment, Process Saf. Environ. 84(B4) (2006) 258-264.