Design of heat exchanger network based on entransy theory

doi:10.1016/j.cjche.2017.10.007

Chinese Journal of Chemical Engineering ›› 2018, Vol. 26 ›› Issue (8): 1692-1699.DOI: 10.1016/j.cjche.2017.10.007

• Selected Papers from the Chinese Process Systems Engineering Annual Meeting 2017 • 上一篇下一篇

Design of heat exchanger network based on entransy theory

Li Xia, Yuanli Feng, Xiaoyan Sun, Shuguang Xiang

Institute of Process System Engineering, Qingdao University of Science and Technology, Qingdao 266042, China

收稿日期:2017-08-29 出版日期:2018-08-28 发布日期:2018-09-21
通讯作者: Shuguang Xiang,E-mail address:xsg@qust.edu.cn
基金资助:
Supported the National Natural Science Foundation of China (21406124).

Design of heat exchanger network based on entransy theory

Li Xia, Yuanli Feng, Xiaoyan Sun, Shuguang Xiang

Institute of Process System Engineering, Qingdao University of Science and Technology, Qingdao 266042, China

Received:2017-08-29 Online:2018-08-28 Published:2018-09-21
Contact: Shuguang Xiang,E-mail address:xsg@qust.edu.cn
Supported by:
Supported the National Natural Science Foundation of China (21406124).

摘要/Abstract

摘要： The heat exchanger network (HEN) synthesis problem based on entransy theory is analyzed. According to the characteristics of entransy representation of thermal potential energy, the entransy dissipation represents the irreversibility of the heat transfer process, the temperature difference determines the entransy dissipation, and four HEN design steps based on entransy theory are put forward. The present study shows how it is possible to set energy targets based on entransy and achieve them with a network of heat exchangers by an example of heat exchanger network design for four streams. In order to verify the correctness of the heat exchanger networks design method based on entransy theory, the synthesis of the HEN for the diesel hydrogenation unit is studied. Using the heat exchange networks design method based on entransy theory, the HEN obtained is consistent with energy targets. The entransy transfer efficiency of HEN based on entransy theory is 92.29%, higher than the entransy transfer efficiency of the maximum heat recovery network based on pinch technology.

关键词: Process systems, Heat exchanger network synthesis, Heat transfer, Entransy, Energy target, Pinch

Abstract: The heat exchanger network (HEN) synthesis problem based on entransy theory is analyzed. According to the characteristics of entransy representation of thermal potential energy, the entransy dissipation represents the irreversibility of the heat transfer process, the temperature difference determines the entransy dissipation, and four HEN design steps based on entransy theory are put forward. The present study shows how it is possible to set energy targets based on entransy and achieve them with a network of heat exchangers by an example of heat exchanger network design for four streams. In order to verify the correctness of the heat exchanger networks design method based on entransy theory, the synthesis of the HEN for the diesel hydrogenation unit is studied. Using the heat exchange networks design method based on entransy theory, the HEN obtained is consistent with energy targets. The entransy transfer efficiency of HEN based on entransy theory is 92.29%, higher than the entransy transfer efficiency of the maximum heat recovery network based on pinch technology.

Key words: Process systems, Heat exchanger network synthesis, Heat transfer, Entransy, Energy target, Pinch

Li Xia, Yuanli Feng, Xiaoyan Sun, Shuguang Xiang. Design of heat exchanger network based on entransy theory[J]. Chinese Journal of Chemical Engineering, 2018, 26(8): 1692-1699.

Li Xia, Yuanli Feng, Xiaoyan Sun, Shuguang Xiang. Design of heat exchanger network based on entransy theory[J]. Chin.J.Chem.Eng., 2018, 26(8): 1692-1699.

参考文献

[1] P.M. Pereira, M.C. Fernandes, H.A. Matos, FI2EPI-A freeware tool for performing Heat Integration based on Pinch Analysis, Comput. Aided Chem. Eng. 38(12) (2016) 1815-1820.

[2] I. Bulatov, Handbook of Process Integration[M] Woodhead Publishing, UK, 20131059-1085.

[3] C. Cui, J. Sun, Coupling design of interunit heat integration in an industrial crude distillation plant using pinch analysis, Appl. Therm. Eng. 117(5) (2017) 145-154.

[4] S. Tututi-Avila, N. Medina-Herrera, J. Hahn, et al., Design of an energy-efficient sidestream extractive distillation system, Comput. Chem. Eng. 102(6) (2017) 17-25.

[5] M.R.W. Walmsley, T.G. Walmsley, M.J. Atkins, Carbon Emissions Pinch Analysis for emissions reductions in the New Zealand transport sector through to 2050, Energy 92(12) (2015) 569-576.

[6] S. Bandyopadhyay, N.B. Desai, Cost optimal energy sector planning:A Pinch Analysis approach, J. Clean. Prod. 136(11) (2016) 246-253.

[7] F. Wang, Y. Gao, W.X. Dong, et al., Segmented pinch analysis for environmental risk management, Resour. Conserv. Recycl. 122(7) (2017) 353-361.

[8] R.R. Tan, M.K.A. Aziz, D.K.S. Ng, et al., Pinch analysis-based approach to industrial safety risk and environmental management, Clean Technol. Environ. Policy 18(7) (2016) 2107-2117.

[9] Z.Y. Guo, H.Y. Zhu, X.G. Liang, Entransy-A physical quantity describing heat transfer ability, Int. J. Heat Mass Transf. 50(13) (2007) 2545-2556.

[10] G.J. Hu, Z.Y. Guo, The efficiency of heat transfer process, J. Eng. Thermophys. 32(6) (2011) 1005-1008.

[11] Q. Chen, Y.C. Xu, Z.Y. Guo, The property diagram in heat transfer and its applications, Chin. Sci. Bull. 57(57) (2012) 4646-4652.

[12] L. Xia, Y.L. Feng, X.Y. Sun, et al., A novel method based on entransy theory for setting energy targets of heat exchanger network, Chin. J. Chem. Eng. 25(8) (2017) 1037-1042.

[13] L. Xia, Y.L. Feng, S.G. Xiang, Progress and application of entransy theory in energy saving of chemical processes, CIESC J. 67(12) (2016) 4915-4921.

[14] L. Xia, Y.L. Feng, S.G. Xiang, Comparative study of adaptability for S-zorb unit based on exergy analysis and entransy analysis, Chem. Eng. Trans. 61(10) (2017) 1825-1830.

[1]	Xuejing He, Zhenlin Li, Ji Wang, Hai Yu. Effects of tube cross-sectional shapes on flow pattern, liquid film and heat transfer of n-pentane across tube bundles[J]. 中国化学工程学报, 2023, 60(8): 16-25.
[2]	Jiahao Xing, Huaizhi Han, Ruitian Yu, Wen Luo. Numerical simulation of flow and heat transfer of n-decane in sub-millimeter spiral tube at supercritical pressure[J]. 中国化学工程学报, 2023, 60(8): 173-185.
[3]	Danlei Chen, Yiqing Luo, Xigang Yuan. Cascade refrigeration system synthesis based on hybrid simulated annealing and particle swarm optimization algorithm[J]. 中国化学工程学报, 2023, 58(6): 244-255.
[4]	Shanwei Xiong, Li Zhou, Yiyang Dai, Xu Ji. Attention-based long short-term memory fully convolutional network for chemical process fault diagnosis[J]. 中国化学工程学报, 2023, 56(4): 1-14.
[5]	Fangyuan Ma, Cheng Ji, Jingde Wang, Wei Sun. Early identification of process deviation based on convolutional neural network[J]. 中国化学工程学报, 2023, 56(4): 104-118.
[6]	Chengang Yang, Huaizhi Han, Quan Zhu, Xiangyuan Li. Cracking and buoyancy effect on hydrocarbon endothermic and heat transfer characteristics in rectangular mini-channel[J]. 中国化学工程学报, 2023, 56(4): 242-254.
[7]	Yiming Bai, Shuaiyu Xiang, Feifan Cheng, Jinsong Zhao. A dynamic-inner LSTM prediction method for key alarm variables forecasting in chemical process[J]. 中国化学工程学报, 2023, 55(3): 266-276.
[8]	Kuo Lin, Zhongjie Shen, Qinfeng Liang, Jianliang Xu, Haifeng Liu. The study of the effect of gas-phase fluctuation on slag flow and refractory brick corrosion in the slag tapping hole of an entrained-flow gasifier[J]. 中国化学工程学报, 2022, 47(7): 271-281.
[9]	Feng Jiang, Di Xu, Ruijia Li, Guopeng Qi, Xiulun Li. Particle collision behavior and heat transfer performance in a Na₂SO₄ circulating fluidized bed evaporator[J]. 中国化学工程学报, 2022, 46(6): 40-52.
[10]	Mehdi Miansari, Mehdi Rajabtabar Darvishi, Davood Toghraie, Pouya Barnoon, Mojtaba Shirzad, As'ad Alizadeh. Numerical investigation of grooves effects on the thermal performance of helically grooved shell and coil tube heat exchanger[J]. 中国化学工程学报, 2022, 44(4): 424-434.
[11]	Zhijie Shen, Jingchun Min. Non-equilibrium thermodynamic analysis of coupled heat and moisture transfer across a membrane[J]. 中国化学工程学报, 2022, 44(4): 497-506.
[12]	Yu-Liang Sun, Davood Toghraie, Omid Ali Akbari, Farzad Pourfattah, As'ad Alizadeh, Navid Ghajari, Mehran Aghajani. Thermal performance and entropy generation for nanofluid jet injection on a ribbed microchannel with oscillating heat flux: Investigation of the first and second laws of thermodynamics[J]. 中国化学工程学报, 2022, 42(2): 450-464.
[13]	Danlei Chen, Yiqing Luo, Xigang Yuan. Refrigeration system synthesis based on de-redundant model by particle swarm optimization algorithm[J]. 中国化学工程学报, 2022, 50(10): 412-422.
[14]	Zhixia Deng, Shuanshi Fan, Yanhong Wang, Xuemei Lang, Gang Li. Enhance hydrates formation with stainless steel fiber for high capacity methane storage[J]. 中国化学工程学报, 2022, 50(10): 435-443.
[15]	Qiang Zheng, Jingxuan Yang, Wenhao Lian, Baoping Zhang, Xueer Pan, Zhonglin Zhang, Xiaogang Hao, Guoqing Guan. Multi-fluid Eulerian simulation of binary particles mixing and gas-solids contacting in high solids-flux downer reactor equipped with a lateral particle feeding nozzle[J]. 中国化学工程学报, 2021, 35(7): 152-162.

Design of heat exchanger network based on entransy theory

Design of heat exchanger network based on entransy theory

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价