SCI和EI收录∣中国化工学会会刊

中国化学工程学报 ›› 2020, Vol. 28 ›› Issue (7): 1973-1980.DOI: 10.1016/j.cjche.2020.04.018

• Materials and Product Engineering • 上一篇    下一篇

Preparation and characterization of neodymium hydroxide powder via the hydration method

Hongxi Li, Chenggong Xu, Qishan Yang   

  1. School of Chemistry and Chemical Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, China
  • 收稿日期:2020-02-15 修回日期:2020-04-09 出版日期:2020-07-28 发布日期:2020-08-31
  • 通讯作者: Qishan Yang
  • 基金资助:
    The authors gratefully acknowledge the financial support for this study by the Natural Science Foundation of Inner Mongolia (CN) (2016ZD05).

Preparation and characterization of neodymium hydroxide powder via the hydration method

Hongxi Li, Chenggong Xu, Qishan Yang   

  1. School of Chemistry and Chemical Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, China
  • Received:2020-02-15 Revised:2020-04-09 Online:2020-07-28 Published:2020-08-31
  • Contact: Qishan Yang
  • Supported by:
    The authors gratefully acknowledge the financial support for this study by the Natural Science Foundation of Inner Mongolia (CN) (2016ZD05).

摘要: The preparation of Nd(OH)3 powder by the direct hydration method using Nd2O3 as a raw material was studied, and the effects of stirring mode, H2O and Nd2O3 molar ratio, stirring rate, and reaction time on temperature change and conversion rate in a hydration system were analyzed. The reasonable process conditions for the direct hydration of Nd(OH)3 by Nd2O3 were then determined. Process, morphology, and structure were considered in the preparation of neodymium hydroxide powder, and its composition was investigated by X-ray powder diffraction, scanning electron microscopy, laser particle size analysis, thermogravimetric differential thermal analysis, and chemical analysis. It has been proved that the process is simple and feasible, in line with the concept of modern green chemistry, and the products also meet the market requirements.

关键词: Hydration method, Neodymium hydroxide, Powder preparation, Influencing factor, Green chemical engineering

Abstract: The preparation of Nd(OH)3 powder by the direct hydration method using Nd2O3 as a raw material was studied, and the effects of stirring mode, H2O and Nd2O3 molar ratio, stirring rate, and reaction time on temperature change and conversion rate in a hydration system were analyzed. The reasonable process conditions for the direct hydration of Nd(OH)3 by Nd2O3 were then determined. Process, morphology, and structure were considered in the preparation of neodymium hydroxide powder, and its composition was investigated by X-ray powder diffraction, scanning electron microscopy, laser particle size analysis, thermogravimetric differential thermal analysis, and chemical analysis. It has been proved that the process is simple and feasible, in line with the concept of modern green chemistry, and the products also meet the market requirements.

Key words: Hydration method, Neodymium hydroxide, Powder preparation, Influencing factor, Green chemical engineering