A CFD model for gas uniform distribution in turbulent flow for the production of titanium pigment in chloride process

doi:10.1016/j.cjche.2016.04.051

Chinese Journal of Chemical Engineering ›› 2016, Vol. 24 ›› Issue (6): 749-756.DOI: 10.1016/j.cjche.2016.04.051

• 第25届中国过程控制会议专栏 • 上一篇下一篇

A CFD model for gas uniform distribution in turbulent flow for the production of titanium pigment in chloride process

Yadong Li^1,2, Gang Xie^2,3,4, Ting Lei⁵, Chongjun Bao^3,4, Lin Tian³, Yanqing Hou¹

1 State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming 650093, China;
2 Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China;
3 Kunming Metallurgical Research Institute, Kunming 650031, China;
4 Key Laboratory of Pressure Hydrometallurgy Technology Associated Non-Ferrous Metal Resources, Kunming 650031, China;
5 Kunming Metallurgy College, Kunming 650033, China

收稿日期:2015-11-14 修回日期:2016-01-22 出版日期:2016-06-28 发布日期:2016-07-12
通讯作者: Yanqing Hou
基金资助:
Supported by the National Natural Science Foundation of China (21566015, 51404123), the Applied Basic Research Projects of Yunnan (2013FC002, 2013FC003, 2015FB126) and the Provincial Personnel Training Funds of Yunnan Province of China (KKSY201352109, KKPT201563013).

A CFD model for gas uniform distribution in turbulent flow for the production of titanium pigment in chloride process

Yadong Li^1,2, Gang Xie^2,3,4, Ting Lei⁵, Chongjun Bao^3,4, Lin Tian³, Yanqing Hou¹

1 State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming 650093, China;
2 Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China;
3 Kunming Metallurgical Research Institute, Kunming 650031, China;
4 Key Laboratory of Pressure Hydrometallurgy Technology Associated Non-Ferrous Metal Resources, Kunming 650031, China;
5 Kunming Metallurgy College, Kunming 650033, China

Received:2015-11-14 Revised:2016-01-22 Online:2016-06-28 Published:2016-07-12
Contact: Yanqing Hou
Supported by:
Supported by the National Natural Science Foundation of China (21566015, 51404123), the Applied Basic Research Projects of Yunnan (2013FC002, 2013FC003, 2015FB126) and the Provincial Personnel Training Funds of Yunnan Province of China (KKSY201352109, KKPT201563013).

摘要/Abstract

摘要： The fluid dynamic behavior of feeding gas (TiCl₄) in an annular channel affects the combination of O₂ and TiCl₄ in an oxidation reactor, a key piece of equipment in titanium pigment production. The numerical procedure was validated by a 3-dimensional gas flow in the annular channel. Applying the validated model, the flow characteristics of TiCl₄ in the oxidation reactor with a tangential inlet were simulated and characterized. The flow distribution with five rectifying rings of different structure was simulated and analyzed. The results showed that the rectifying ring improved the distribution uniformity of the pressure and outlet velocity. Compared to the original case without a rectifying ring, the non-uniformity of the pressure and outlet velocity could be reduced by up to 91% and 69% respectively. The rectifying ring #5, which can be installed and adjusted easily, ismore effective in realizing even distribution. In addition, installation of the rectifying ring effectively reduced the circulating flow in an annular channel as well as the total energy loss.

关键词: Oxidation reactor, Chloride process, Rectifying ring, Computational fluid dynamics, Dimensionless pressure

Abstract: The fluid dynamic behavior of feeding gas (TiCl₄) in an annular channel affects the combination of O₂ and TiCl₄ in an oxidation reactor, a key piece of equipment in titanium pigment production. The numerical procedure was validated by a 3-dimensional gas flow in the annular channel. Applying the validated model, the flow characteristics of TiCl₄ in the oxidation reactor with a tangential inlet were simulated and characterized. The flow distribution with five rectifying rings of different structure was simulated and analyzed. The results showed that the rectifying ring improved the distribution uniformity of the pressure and outlet velocity. Compared to the original case without a rectifying ring, the non-uniformity of the pressure and outlet velocity could be reduced by up to 91% and 69% respectively. The rectifying ring #5, which can be installed and adjusted easily, ismore effective in realizing even distribution. In addition, installation of the rectifying ring effectively reduced the circulating flow in an annular channel as well as the total energy loss.

Key words: Oxidation reactor, Chloride process, Rectifying ring, Computational fluid dynamics, Dimensionless pressure

Yadong Li, Gang Xie, Ting Lei, Chongjun Bao, Lin Tian, Yanqing Hou. A CFD model for gas uniform distribution in turbulent flow for the production of titanium pigment in chloride process[J]. Chinese Journal of Chemical Engineering, 2016, 24(6): 749-756.

参考文献

[1] G.Z. Deng, Titanium metallurgy, Metallurgical Industry Press, Beijing, 2010(in Chinese).

[2] W. Zhang, Z. Zhu, C.Y. Cheng, A literature review of titaniummetallurgical processes, Hydrometallurgy 108(3-4) (2011) 177-185.

[3] S. Yuan, W. Chen, S. Hu, Fabrication of TiO₂ nanoparticles/surfactant polymer complex film on glassy carbon electrode, Mater. Sci. Eng. C 25(2005) 479-483.

[4] J. Gambogi, Mineral commodity summaries 2014, USGS,Washington D.C., 2014170.

[5] B.A. van Driel, P.J. Kooyman, K.J. van den Berg, A. Schmidt-Ott, J. Dik, A quick assessment of the photocatalytic activity of TiO₂ pigments-From lab to conservation studio! Microchem. J. 126(2016) 162-171.

[6] S. Middlemas, Z.Z. Fang, P. Fan, Life cycle assessment comparison of emerging and traditional titanium dioxide manufacturing processes, Hydrometallurgy 108-132(2013) 107-113.

[7] S. Middlemas, Z.Z. Fang, P. Fan, A new method for production of titanium dioxide pigment, J. Clean. Prod. 89(2015) 137-147.

[8] N. Abdullah, S.K. Kamarudin, Titanium dioxide in fuel cell technology:An overview, J. Power Sources 278(2015) 109-118.

[9] X. Cong, Z.F. Zhang, X.Q.Wang, Preparation of TiC14 with the titanium slag containing magnesia and calcia in a combined fluidized bed, Chin. J. Chem. Eng. 14(3) (2006) 281-288.

[10] H.F. Liu, S.F. Ji, Y.Y. Zhang, M. Li, H. Yang, Porous TiO₂-coated magnetic core-shell nanocomposites:Preparation and enhanced photocatalytic activity, Chin. J. Chem. Eng. 21(5) (2013) 569-576.

[11] J.Q. Meng, J.X. Wu, J.H. Zhu, F.Y. Wu, L.Q. Long, Worldwide patent distribution of titanium dioxide by chlorination process, Inorg. Chem. Ind. 46(1) (2014) 11-16(in Chinese).

[12] S.E. Pratsinis, P.T. Spicer, Competition between gas phase and surface oxidation of TiCl₄ during synthesis of TiO₂ particles, Chem. Eng. Sci. 53(10) (1998) 1861-1868.

[13] Z.M. Lu, C.Z. Li, D.Z. Cong, H.L. Liu, Y. Hu, Study on jet mixing characters in the oxidation reactor for titanium dioxide powder production by chloride process, Chem. Eng. China 29(3) (2001) 25-28(in Chinese).

[14] S.M. Zhang, A coldmodel experimental study of titaniumpigment, Paint Coat. Ind. 30(5) (2000) 20-22(in Chinese).

[15] Y. Cheng, A.W. Ye, F. Liu, F.Wei, Numerical simulation of swirling flows in oxidation reactors for TiO₂ manufacture, China Particuol. 4(3-4) (2006) 108-113.

[16] Y. Cheng, Z. Liu, P.C. Luo, F. Wei, Gas cross-flow mixing in TiO₂ oxidation reactor of chloride process, J. Chem. Ind. Eng. China 57(12) (2006) 2840-2846(in Chinese).

[17] D.Z. Cong, The pressure distribution of variable mass flow in the annular channel (part one), Chem. Equip. Technol. 16(6) (1995) 1-5(in Chinese).

[18] D.Z. Cong, The pressure distribution of variable mass flow in the annular channel (part two), Chem. Equip. Technol. 17(1) (1996) 7-10(in Chinese).

[19] R.J. Li, Y.H. Chen, Z.B. Zhu, Analysis on uniform fluid distribution of circle distributor in multitube fixed-bed reactor, Chem. Eng. China 37(3) (2009) 20-26(in Chinese).

[20] R.J. Li, C.Y. Chen, Y.Q.Wu, Z.B. Zhu, Parameters for uniform distribution of stream in large-scale radial flow reactor, Chem. Eng. China 37(10) (2009) 28-31(in Chinese).

[21] Z.M. Lu, C.Z. Li, D.Z. Cong, Gas flow and distribution in circle distributor, Chem. Eng. China 29(2) (2001) 26-30(in Chinese).

[22] R. Singh, V. Raman, Two-dimensional direct numerical simulation of nanoparticle precursor evolution in turbulent flames using detailed chemistry, Chem. Eng. J. 207-208(2012) 794-802.

[23] Y. Sung, V. Raman, R.O. Fox, Large-eddy-simulation-based multiscale modeling of TiO₂ nanoparticle synthesis in a turbulent flame reactor using detailed nucleation chemistry, Chem. Eng. Sci. 66(19) (2011) 4370-4381.

[24] A. Schild, A. Gutsch, H. Mühlenweg, S.E. Patsinis, Simulation of nanoparticle production in premixed aerosol flow reactors by interfacing fluid mechanics and particle dynamics, J. Nanopart. Res. 1(2) (1999) 305-315.

[25] T. Johannessen, S.E. Patsinis, H. Livbjerg, Computational analysis of coagulation and coalescence in the flame synthesis of titania particles, Powder Technol. 118(3) (2001) 242-250.

[26] J. Akroyd, A.J. Smith, R. Shirley, L.R. Mcglashan, M. Kraft, A coupled CFD-population balance approach for nanoparticle synthesis in turbulent reacting flows, Chem. Eng. Sci. 66(17) (2011) 3792-3805.

[27] V.S. Buddhiraju, V. Runkana, Simulation of nanoparticle synthesis in an aerosol flame reactor using a coupled flame dynamics-monodisperse population balance model, J. Aerosol Sci. 43(1) (2012) 1-13.

[28] G.K. Batchelor, An introduction to fluid dynamics, Cambridge University Press, England, 1967.

[29] T.H. Shih,W.W. Liou, A. Shabbir, Z. Yang, J. Zhu, A new k-ε eddy-viscosity model for high Reynolds number turbulent flows-model development and validation, Comput. Fluids 24(3) (1995) 227-238.

[30] A. Guardoa, M. Coussiratb, M.A. Larrayoza, F. Recasensa, E. Egusquizab, Influence of the turbulence model in CFD modeling of wall-to-fluid heat transfer in packed beds, Chem. Eng. Sci. 60(6) (2005) 1733-1742.

[31] A.G. Dixona, M.E. Taskina, M. Nijemeislandb, E.H. Stittb,Wall-to-particle heat transfer in steam reformer tubes:CFD comparison of catalyst particles, Chem. Eng. Sci. 63(8) (2008) 2219-2224.

[32] Z.M. Lu, C.Z. Li, D.Z. Cong, H.C. Gu, H.L. Liu, Y. Hu, The mass variable flow and pressure distribution in a gas distributor, J. East China Univ. Sci. Technol. 26(4) (2000) 362-366(in Chinese).

[33] Z. Chen, P. Zhou, C. Mei, Principle of transport process, Central South University Press, Changsha, China, 2011(in Chinese).

A CFD model for gas uniform distribution in turbulent flow for the production of titanium pigment in chloride process

A CFD model for gas uniform distribution in turbulent flow for the production of titanium pigment in chloride process

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Lijuan Zhao, Zhe Tan, Xiaoguang Zhang, Qijun Zhang, Wei Wang, Qiang Deng, Jie Ma, De'an Pan. Research on process modeling and simulation of spent lead paste desulfurization enhanced reactor[J]. 中国化学工程学报, 2023, 60(8): 293-303.
[2]	Chengang Yang, Huaizhi Han, Quan Zhu, Xiangyuan Li. Cracking and buoyancy effect on hydrocarbon endothermic and heat transfer characteristics in rectangular mini-channel[J]. 中国化学工程学报, 2023, 56(4): 242-254.
[3]	Shuangfei Zhao, Yingying Nie, Wenyan Zhang, Runze Hu, Lianzhu Sheng, Wei He, Ning Zhu, Yuguang Li, Dong Ji, Kai Guo. Microfluidic field strategy for enhancement and scale up of liquid–liquid homogeneous chemical processes by optimization of 3D spiral baffle structure[J]. 中国化学工程学报, 2023, 56(4): 255-265.
[4]	Qi Han, Xin-Yuan Zhang, Hai-Bo Wu, Xian-Tai Zhou, Hong-Bing Ji. Different efficiency toward the biomimetic aerobic oxidation of benzyl alcohol in microchannel and bubble column reactors: Hydrodynamic characteristics and gas–liquid mass transfer[J]. 中国化学工程学报, 2023, 55(3): 84-92.
[5]	Songsong Wang, Hong Li, Changyuan Tao, Renlong Liu, Yundong Wang, Zuohua Liu. Study on cavern evolution and performance of three mixers in agitation of yield-pseudoplastic fluids[J]. 中国化学工程学报, 2023, 55(3): 111-122.
[6]	Yongbo Zhou, Yang Jin, Jun Li, Qinyan Wang, Ming Chen. Numerical study on the hydrodynamics behavior of a central insert microchannel[J]. 中国化学工程学报, 2023, 53(1): 361-373.
[7]	Tianpeng LiZhou, Jiajia Luo, Tiefeng Wang. Enhancement of acetylene and ethylene yields in partially decoupled oxidation of ethane by changing the composition of heat carrier[J]. 中国化学工程学报, 2022, 47(7): 71-78.
[8]	Zewen Chen, Yongjun Wu, Jian Wang, Peicheng Luo. Study on the solid–liquid suspension behavior in a tank stirred by the long-short blades impeller[J]. 中国化学工程学报, 2022, 47(7): 79-88.
[9]	Liying Chen, Junheng Guo, Wenpeng Li, Shuchun Zhao, Wei Li, Jinli Zhang. A numerical study of mixing intensification for highly viscous fluids in multistage rotor–stator mixers[J]. 中国化学工程学报, 2022, 47(7): 218-230.
[10]	Zijun Li, Shubo Wang, Sai Yao, Xueke Wang, Weiwei Li, Tong Zhu, Xiaofeng Xie. Experimental and numerical study on improvement performance by wave parallel flow field in a proton exchange membrane fuel cell[J]. 中国化学工程学报, 2022, 45(5): 90-102.
[11]	Yongjun Wu, Pan You, Peicheng Luo. Effect of pitched short blades on the flow characteristics in a stirred tank with long-short blades impeller[J]. 中国化学工程学报, 2022, 45(5): 143-152.
[12]	Ning Liu, Xingping Liu, Fumin Wang, Feng Xin, Mingshuai Sun, Yi Zhai, Xubin Zhang. CFD simulation study of the effect of baffles on the fluidized bed for hydrogenation of silicon tetrachloride[J]. 中国化学工程学报, 2022, 45(5): 219-228.
[13]	Narjes Hemati Alam, Eslam Kashi, Razieh Habibpour. Computational fluid dynamics simulation of gas dispersion in complex facilities using Kit Fox field experiments: Validation and statistical evaluation[J]. 中国化学工程学报, 2022, 44(4): 412-423.
[14]	Huina Wang, Xiaoxia Duan, Xin Feng, Zai-Sha Mao, Chao Yang. Effect of impeller type and scale-up on spatial distribution of shear rate in a stirred tank[J]. 中国化学工程学报, 2022, 42(2): 351-363.
[15]	Anshi Hong, Zisheng Zhang, Xingang Li, Xin Gao. A generalized CFD model for evaluating catalytic separation process in structured porous materials[J]. 中国化学工程学报, 2022, 51(11): 168-177.