SCI和EI收录∣中国化工学会会刊

Chinese Journal of Chemical Engineering ›› 2018, Vol. 26 ›› Issue (8): 1644-1652.DOI: 10.1016/j.cjche.2017.09.026

• Selected Papers from the Chinese Process Systems Engineering Annual Meeting 2017 • 上一篇    下一篇

Synthesis of indirect work exchange networks considering both isothermal and adiabatic process together with exergy analysis

Yu Zhuang, Linlin Liu, Lei Zhang, Jian Du   

  1. Institute of Chemical Process Systems Engineering, School of Chemical Engineering, Dalian University of Technology, Dalian 116012, China
  • 收稿日期:2017-08-27 出版日期:2018-08-28 发布日期:2018-09-21
  • 通讯作者: Jian Du,E-mail address:dujian@dlut.edu.cn
  • 基金资助:

    Supported by the National Natural Science Foundation of China (21576036 and 21776035).

Synthesis of indirect work exchange networks considering both isothermal and adiabatic process together with exergy analysis

Yu Zhuang, Linlin Liu, Lei Zhang, Jian Du   

  1. Institute of Chemical Process Systems Engineering, School of Chemical Engineering, Dalian University of Technology, Dalian 116012, China
  • Received:2017-08-27 Online:2018-08-28 Published:2018-09-21
  • Contact: Jian Du,E-mail address:dujian@dlut.edu.cn
  • Supported by:

    Supported by the National Natural Science Foundation of China (21576036 and 21776035).

摘要: In this paper, an efficient methodology for synthesizing the indirect work exchange networks (WEN) considering isothermal process and adiabatic process respectively based on transshipment model is first proposed. In contrast with superstructure method, the transshipment model is easier to obtain the minimum utility consumption taken as the objective function and more convenient for us to attain the optimal network configuration for further minimizing the number of units. Different from division of temperature intervals in heat exchange networks, different pressure intervals are gained according to the maximum compression/expansion ratio in consideration of operating principles of indirect work exchangers and the characteristics of no pressure constraints for stream matches. The presented approach for WEN synthesis is a linear programming model applied to the isothermal process, but for indirect work exchange networks with adiabatic process, a nonlinear programming model needs establishing. Additionally, temperatures should be regarded as decision variables limited to the range between inlet and outlet temperatures in each sub-network. The constructed transshipment model can be solved first to get the minimum utility consumption and further to determine the minimum number of units by merging the adjacent pressure intervals on the basis of the proposed merging methods, which is proved to be effective through exergy analysis at the level of units structures. Finally, two cases are calculated to confirm it is dramatically feasible and effective that the optimal WEN configuration can be gained by the proposed method.

关键词: Work exchange networks, Transshipment model, Adiabatic process, Exergy analysis, Isothermal process, Work cascade

Abstract: In this paper, an efficient methodology for synthesizing the indirect work exchange networks (WEN) considering isothermal process and adiabatic process respectively based on transshipment model is first proposed. In contrast with superstructure method, the transshipment model is easier to obtain the minimum utility consumption taken as the objective function and more convenient for us to attain the optimal network configuration for further minimizing the number of units. Different from division of temperature intervals in heat exchange networks, different pressure intervals are gained according to the maximum compression/expansion ratio in consideration of operating principles of indirect work exchangers and the characteristics of no pressure constraints for stream matches. The presented approach for WEN synthesis is a linear programming model applied to the isothermal process, but for indirect work exchange networks with adiabatic process, a nonlinear programming model needs establishing. Additionally, temperatures should be regarded as decision variables limited to the range between inlet and outlet temperatures in each sub-network. The constructed transshipment model can be solved first to get the minimum utility consumption and further to determine the minimum number of units by merging the adjacent pressure intervals on the basis of the proposed merging methods, which is proved to be effective through exergy analysis at the level of units structures. Finally, two cases are calculated to confirm it is dramatically feasible and effective that the optimal WEN configuration can be gained by the proposed method.

Key words: Work exchange networks, Transshipment model, Adiabatic process, Exergy analysis, Isothermal process, Work cascade