Poly (ether ether ketone ketone) based imidazolium as anion exchange membranes for alkaline fuel cells

doi:10.1016/j.cjche.2018.05.015

Chinese Journal of Chemical Engineering ›› 2018, Vol. 26 ›› Issue (10): 2130-2138.DOI: 10.1016/j.cjche.2018.05.015

• Energy, Resources and Environmental Technology • 上一篇下一篇

Poly (ether ether ketone ketone) based imidazolium as anion exchange membranes for alkaline fuel cells

Tiantian Li¹, Xuemei Wu¹, Wanting Chen¹, Xiaoming Yan², Dongxing Zhen¹, Xue Gong¹, Jiafei Liu², Shaofeng Zhang¹, Gaohong He^1,2

1 State Key Laboratory of Fine Chemicals, Research and Development Center of Membrane Science and Technology, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China;
2 School of Petroleum and Chemical Engineering, State Key Laboratory of Fine Chemicals, Research and Development Center of Membrane Science and Technology, Dalian University of Technology, Panjin 124221, China

收稿日期:2018-03-31 修回日期:2018-05-19 出版日期:2018-10-28 发布日期:2018-11-14
通讯作者: Xiaoming Yan,E-mail addresses:yanxiaoming@dlut.edu.cn;Gaohong He,E-mail addresses:hgaohong@dlut.edu.cn
基金资助:
Supported by the National Natural Science Foundation of China (21706023, 21476044, 21406031), the National Key Research and Development Program of China (2016YFB0101203), Education Department of Liaoning Province of China (LT2015007), Fundamental Research Funds for the Central Universities (DUT16TD19) and the Changjiang Scholars Program (T2012049).

Poly (ether ether ketone ketone) based imidazolium as anion exchange membranes for alkaline fuel cells

Tiantian Li¹, Xuemei Wu¹, Wanting Chen¹, Xiaoming Yan², Dongxing Zhen¹, Xue Gong¹, Jiafei Liu², Shaofeng Zhang¹, Gaohong He^1,2

1 State Key Laboratory of Fine Chemicals, Research and Development Center of Membrane Science and Technology, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China;
2 School of Petroleum and Chemical Engineering, State Key Laboratory of Fine Chemicals, Research and Development Center of Membrane Science and Technology, Dalian University of Technology, Panjin 124221, China

Received:2018-03-31 Revised:2018-05-19 Online:2018-10-28 Published:2018-11-14
Contact: Xiaoming Yan,E-mail addresses:yanxiaoming@dlut.edu.cn;Gaohong He,E-mail addresses:hgaohong@dlut.edu.cn
Supported by:
Supported by the National Natural Science Foundation of China (21706023, 21476044, 21406031), the National Key Research and Development Program of China (2016YFB0101203), Education Department of Liaoning Province of China (LT2015007), Fundamental Research Funds for the Central Universities (DUT16TD19) and the Changjiang Scholars Program (T2012049).

摘要/Abstract

摘要： An imidazolium functionalized poly (ether ether ketone ketone) (PEEKK-DImOH) anion exchange membrane (AEM) readily soluble in certain low-boiling-point solvents (isopropanol) is prepared. The solubility results are consistent with the results of molecular dynamics simulations. By varying the chloromethylation reaction temperature or concentrated sulfuric acid concentration of PEEKK, the degrees of chloromethylation of PEEKK are changed from 54% to 92%, the corresponding PEEKK-DImOH AEMs with the ion exchange capacities (IECs) of 1.14-1.65 mmol·g^-1. The PEEKK-DImOH 92% AEM shows high hydroxide conductivity (31 mS·cm^-1), suitable water uptake (94%) and acceptable swelling ratio (39%) at 60℃. In addition, the PEEKK-DImOH AEMs possess good thermal and alkaline stability. The maximum power density (46.16 mW·cm^-2) of fuel cell prepared with PEEKK-DImOH 92% AEM as exchange membrane and ionomer is much higher than that with commercial AHA membranes. All the above results indicate that the PEEKK used in this study is a promising AEM matrix material for alkaline fuel cells.

关键词: Poly (ether ether ketone ketone), Membranes, Solubility, Ionomer, 1, 2-Dimethylimidazole, Fuel cells

Abstract: An imidazolium functionalized poly (ether ether ketone ketone) (PEEKK-DImOH) anion exchange membrane (AEM) readily soluble in certain low-boiling-point solvents (isopropanol) is prepared. The solubility results are consistent with the results of molecular dynamics simulations. By varying the chloromethylation reaction temperature or concentrated sulfuric acid concentration of PEEKK, the degrees of chloromethylation of PEEKK are changed from 54% to 92%, the corresponding PEEKK-DImOH AEMs with the ion exchange capacities (IECs) of 1.14-1.65 mmol·g^-1. The PEEKK-DImOH 92% AEM shows high hydroxide conductivity (31 mS·cm^-1), suitable water uptake (94%) and acceptable swelling ratio (39%) at 60℃. In addition, the PEEKK-DImOH AEMs possess good thermal and alkaline stability. The maximum power density (46.16 mW·cm^-2) of fuel cell prepared with PEEKK-DImOH 92% AEM as exchange membrane and ionomer is much higher than that with commercial AHA membranes. All the above results indicate that the PEEKK used in this study is a promising AEM matrix material for alkaline fuel cells.

Key words: Poly (ether ether ketone ketone), Membranes, Solubility, Ionomer, 1,2-Dimethylimidazole, Fuel cells

Tiantian Li, Xuemei Wu, Wanting Chen, Xiaoming Yan, Dongxing Zhen, Xue Gong, Jiafei Liu, Shaofeng Zhang, Gaohong He. Poly (ether ether ketone ketone) based imidazolium as anion exchange membranes for alkaline fuel cells[J]. Chinese Journal of Chemical Engineering, 2018, 26(10): 2130-2138.

参考文献

[1] X. Yan, G. He, S. Gu, X. Wu, L. Du, H. Zhang, Quaternized poly (ether ether ketone) hydroxide exchange membranes for fuel cells, J. Membr. Sci. 375(2011) 204-211.

[2] Y.-J. Wang, J. Qiao, R. Baker, J. Zhang, Alkaline polymer electrolyte membranes for fuel cell applications, Chem. Soc. Rev. 42(2013) 5768.

[3] J.R. Varcoe, R.C.T. Slade, An electron-beam-grafted ETFE alkaline anion-exchange membrane in metal-cation-free solid-state alkaline fuel cells, Electrochem. Commun. 8(2006) 839-843.

[4] J. Yan, M.A. Hickner, Anion exchange membranes by bromination of benzylmethylcontaining poly (sulfone)s, Macromolecules 43(2010) 2349-2356.

[5] G. Couture, A. Alaaeddine, F. Boschet, B. Ameduri, Polymeric materials as anion-exchange membranes for alkaline fuel cells, Prog. Polym. Sci. 36(2011) 1521-1557.

[6] G. Merle, M. Wessling, K. Nijmeijer, Anion exchange membranes for alkaline fuel cells:a review, J. Membr. Sci. 377(2011) 1-35.

[7] J.R. Varcoe, R.C.T. Slade, Prospects for alkaline anion-exchange membranes in low temperature fuel cells, Fuel Cells 5(2005) 187-200.

[8] A. Kucernak, F. Bidault, G. Smith, Membrane electrode assemblies based on porous silver electrodes for alkaline anion exchange membrane fuel cells, Electrochim. Acta 82(2012) 284-290.

[9] M. Mamlouk, S.M.S. Kumar, P. Gouerec, K. Scott, Electrochemical and fuel cell evaluation of co based catalyst for oxygen reduction in anion exchange polymer membrane fuel cells, J. Power Sources 196(2011) 7594-7600.

[10] Y. Yang, J. Wang, J. Zheng, S. Li, S. Zhang, A stable anion exchange membrane based on imidazolium salt for alkaline fuel cell, J. Membr. Sci. 467(2014) 48-55.

[11] J. Ran, L. Wu, J.R. Varcoe, A.L. Ong, S.D. Poynton, T. Xu, Development of imidazoliumtype alkaline anion exchange membranes for fuel cell application, J. Membr. Sci. 415(2012) 242-249.

[12] X. Gong, X. Yan, T. Li, X. Wu, W. Chen, S. Huang, Y. Wu, D. Zhen, G. He, Design of pendent imidazolium side chain with flexible ether-containing spacer for alkaline anion exchange membrane, J. Membr. Sci. 523(2017) 216-224.

[13] S. Maurya, S.-H. Shin, Y. Kim, S.-H. Moon, A review on recent developments of anion exchange membranes for fuel cells and redox flow batteries, RSC Adv. 5(2015) 37206-37230.

[14] L. Jheng, S.L. Hsu, B. Lin, Y. Hsu, Quaternized polybenzimidazoles with imidazolium cation moieties for anion exchange membrane fuel cells, J. Membr. Sci. 460(2014) 160-170.

[15] W. Chen, M. Hu, H. Wang, X. Wu, X. Gong, X. Yan, D. Zhen, G. He, Dimensionally stable hexamethylenetetramine functionalized polysulfone anion exchange membranes, J. Mater. Chem. A 5(2017) 15038-15047.

[16] B. Lin, L. Qiu, B. Qiu, Y. Peng, F. Yan, A soluble and conductive polyfluorene ionomer with pendant imidazolium groups for alkaline fuel cell applications, Macromolecules 44(2011) 9642-9649.

[17] M.A. Hickner, A.M. Herring, E.B. Coughlin, Anion exchange membranes:current status and moving forward, J. Polym. Sci. Part B Polym. Phys. 51(2013) 1727-1735.

[18] Y. Xiong, Q.L. Liu, Q.H. Zeng, Quaternized cardo polyetherketone anion exchange membrane for direct methanol alkaline fuel cells, J. Power Sources 193(2009) 541-546.

[19] J. Wang, S. Li, S. Zhang, Novel hydroxide-conducting polyelectrolyte composed of an poly (arylene ether sulfone) containing pendant quaternary guanidinium groups for alkaline fuel cell applications, Macromolecules 43(2010) 3890-3896.

[20] T.A. Sherazi, S. Zahoor, R. Raza, A.J. Shaikh, S.A.R. Naqvi, G. Abbas, Y. Khan, S. Li, Guanidine functionalized radiation induced grafted anion-exchange membranes for solid alkaline fuel cells, Int. J. Hydrog. Energy 40(2015) 786-796.

[21] S.D. Sajjad, D. Liu, Z. Wei, S. Sakri, Y. Shen, Y. Hong, F. Liu, Guanidinium based blend anion exchange membranes for direct methanol alkaline fuel cells (DMAFCs), J. Power Sources 300(2015) 95-103.

[22] C.G. Arges, V. Ramani, Investigation of cation degradation in anion exchange membranes using multi-dimensional NMR spectroscopy, J. Electrochem. Soc. 160(2013) F1006-F1021.

[23] W.H. Awad, J.W. Gilman, M. Nyden, R.H. Harris, T.E. Sutto, J. Callahan, P.C. Trulove, H.C. Delong, D.M. Fox, Thermal degradation studies of alkyl-imidazolium salts and their application in nanocomposites, Thermochim. Acta 409(2004) 3-11.

[24] X. Gong, G. He, X. Yan, Y. Wu, W. Chen, X. Wu, Electrospun nanofiber enhanced imidazolium-functionalized polysulfone composite anion exchange membranes, RSC Adv. 5(2015) 95118-95125.

[25] X. Yan, L. Gao, W. Zheng, X. Ruan, C. Zhang, X. Wu, G. He, Long-spacer-chain imidazolium functionalized poly (ether ether ketone) as hydroxide exchange membrane for fuel cell, Int. J. Hydrog. Energy 41(2016) 14982-14990.

[26] X. Yan, S. Gu, G. He, X. Wu, J. Benziger, Imidazolium-functionalized poly (ether ether ketone) as membrane and electrode ionomer for low-temperature alkaline membrane direct methanol fuel cell, J. Power Sources 250(2014) 90-97.

[27] W.-H. Lee, A.D. Mohanty, C. Bae, Fluorene-based hydroxide ion conducting polymers for chemically stable anion exchange membrane fuel cells, ACS Macro Lett. 4(2015) 453-457.

[28] L. Liu, C. Tong, Y. He, Y. Zhao, C. Lü, Enhanced properties of quaternized graphenes reinforced polysulfone based composite anion exchange membranes for alkaline fuel cell, J. Membr. Sci. 487(2015) 99-108.

[29] E.A. Weiber, P. Jannasch, Polysulfones with highly localized imidazolium groups for anion exchange membranes, J. Membr. Sci. 481(2015) 164-171.

[30] F. Zhang, H. Zhang, C. Qu, Imidazolium functionalized polysulfone anion exchange membrane for fuel cell application, J. Mater. Chem. 21(2011) 12744.

[31] X. Yan, G. He, S. Gu, X. Wu, L. Du, Y. Wang, Imidazolium-functionalized polysulfone hydroxide exchange membranes for potential applications in alkaline membrane direct alcohol fuel cells, Int. J. Hydrog. Energy 37(2012) 5216-5224.

[32] Y.H. Zhang, Q.H. Liu, Y.M. Niu, S.L. Zhang, D. Wang, Z.H. Jiang, Properties and crystallization kinetics of poly(ether ether ketone)-co-poly(ether ether ketone ketone) block copolymers, J. Appl. Polym. Sci. 97(2005) 1652-1658.

[33] T. Liu, Z. Mo, H. Zhang, H. Na, Z. Wu, Variation of crystallographic parameters in PEEKK with heat treatment temperature, Eur. Polym. J. 33(1997) 913-918.

[34] T. Liu, Z. Mo, S. Wang, H. Zhang, Isothermal melt and cold kinetics of poly (aryl ether ether ketone ketone) (PEEKK), Eur. Polym. J. 33(1997) 1405-1414.

[35] X. Yan, S. Gu, G. He, X. Wu, W. Zheng, X. Ruan, Quaternary phosphoniumfunctionalized poly(ether ether ketone) as highly conductive and alkali-stable hydroxide exchange membrane for fuel cells, J. Membr. Sci. 466(2014) 220-228.

[36] C.M. Hansen, Hansen Solubility Parameters:A User's Handbook, CRC Press, Boca Raton, Florida, 2000.

[37] A.F.M. Barton, Solubility parameters, Chem. Rev. 75(1975) 731-753.

[38] X. Li, C. Liu, H. Lu, C. Zhao, Z. Wang, W. Xing, H. Na, Preparation and characterization of sulfonated poly (ether ether ketone ketone) proton exchange membranes for fuel cell application, J. Membr. Sci. 255(2005) 149-155.

[39] B.Liu,D.-S. Kim, J.Murphy, G.P.Robertson, M.D. Guiver, S.Mikhailenko, S.Kaliaguine, Y.-M. Sun, Y.-L. Liu, J.-Y. Lai, Fluorenyl-containing sulfonated poly (aryl ether ether ketoneketone)s(SPFEEKK)for fuelcellapplications, J. Membr. Sci.280(2006)54-64.

[40] B. Liu, G. Wang, W. Hu, Y. Jin, C. Chen, Z. Jiang, W. Zhang, Z. Wu, Y. Wei, Poly(aryl ether ketone)s with (3-methyl)phenyl and (3-trifluoromethyl)phenyl side groups, J. Polym. Sci. Part A Polym. Chem. 40(2002) 3392-3398.

[41] N. Wang, K. Huang, L. Wang, Synthesis and characterization of poly (arylene ether ketone)s containing triazole units through click chemistry, Polym. Bull. 67(2011) 1569-1581.

[42] A. Warshawsky, A. Deshe, Halomethyl Octyl ethers:convenient Halomethylation reagents, J. Polym. Sci. Polym. Chem. Ed. 23(1985) 1839-1841.

[43] H. Zarrin, J. Wu, M. Fowler, Z. Chen, High durable PEK-based anion exchange membrane for elevated temperature alkaline fuel cells, J. Membr. Sci. 394(2012) 193-201.

[44] S. Kim, S. Yang, D. Kim, Poly (arylene ether ketone) with pendant pyridinium groups for alkaline fuel cell membranes, Int. J. Hydrog. Energy 42(2017) 12496-12506.

[45] T. Sakamoto, A. Serov, T. Masuda, M. Kamakura, K. Yoshimoto, T. Omata, H. Kishi, S. Yamaguchi, A. Hori, Y. Horiuchi, T. Terada, K. Artyushkova, P. Atanassov, H. Tanaka, Highly durable direct hydrazine hydrate anion exchange membrane fuel cell, J. Power Sources (2017) 1-9.

[46] L. Zhu, J. Pan, Y. Wang, J. Han, L. Zhuang, M.A. Hickner, Multication side chain anion exchange membranes, Macromolecules 49(2016) 815-824.

[47] R. Espiritu, M. Mamlouk, K. Scott, Study on the effect of the degree of grafting on the performance of polyethylene-based anion exchange membrane for fuel cell application, Int. J. Hydrog. Energy 41(2016) 1120-1133.

[48] A. Arunchander, S.G. Peera, A.K. Sahu, Synthesis of flower-like molybdenum sulfide/graphene hybrid as an efficient oxygen reduction electrocatalyst for anion exchange membrane fuel cells, J. Power Sources 353(2017) 104-114.

[49] V.Mehta,J.S.Cooper, Reviewand analysisofPEM fuelcelldesignand manufacturing, J. Power Sources 114(2003) 32-53.

[50] S. Zhang, G. He, X. Gong, X. Zhu, X. Wu, X. Sun, X. Zhao, H. Li, Electrospun nanofiber enhanced sulfonated poly (phthalazinone ether sulfone ketone) composite proton exchange membranes, J. Membr. Sci. 493(2015) 58-65.

Poly (ether ether ketone ketone) based imidazolium as anion exchange membranes for alkaline fuel cells

Poly (ether ether ketone ketone) based imidazolium as anion exchange membranes for alkaline fuel cells

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Jingzhou Guo, Yuanzuo Zou, Bo Shi, Yuan Pu, Jiexin Wang, Dan Wang, Jianfeng Chen. Experimental verification of nanonization enhanced solubility for poorly soluble optoelectronic molecules[J]. 中国化学工程学报, 2023, 60(8): 8-15.
[2]	Jiahao Lu, Zhimeng Wang, Qi Zhang, Cheng Sun, Yanyan Zhou, Sijia Wang, Xiangyun Qiu, Shoudong Xu, Rentian Chen, Tao Wei. The effects of amino groups and open metal sites of MOFs on polymer-based electrolytes for all-solid-state lithium metal batteries[J]. 中国化学工程学报, 2023, 60(8): 80-89.
[3]	Xingjuan Liang, Dehua Xu, Zhengjuan Yan, Jingxu Yang, Xinlong Wang, Zhiye Zhang, Jingli Wu, Honggang Zhen. Solid-liquid phase equilibrium for the system ammonium polyphosphate-urea ammonium nitrate-potassium chloride-water at 273.2 K[J]. 中国化学工程学报, 2023, 60(8): 131-142.
[4]	Xinxin Li, Hongwei Shao, Shichao Zhang, Yong Li, Jingjing Gu, Qiang Huang, Jin Ran. Two dimensional MoS₂ finding its way towards constructing high-performance alkaline recovery membranes[J]. 中国化学工程学报, 2023, 60(8): 155-164.
[5]	Wenwen Zhang, Zhigang Xue, Liyun Cui, Haoliang Gao, Di Zhao, Rongfei Zhou, Weihong Xing. Synthesis of an IMF zeolite membrane for the separation of xylene isomer[J]. 中国化学工程学报, 2023, 60(8): 205-211.
[6]	Huiqi Wang, Jianpo Ren, Shihao Zhang, Jiayu Dai, Yue Niu, Ketao Shi, Qiuxiang Yin, Ling Zhou. Measurement and correlation of solubility of 9-fluorenone in 11 pure organic solvents from T = 283.15 to 323.15 K[J]. 中国化学工程学报, 2023, 60(8): 235-241.
[7]	Hammad Saulat, Jianhua Yang, Tao Yan, Waseem Raza, Wensen Song, Gaohong He. Tungsten incorporated mobil-type eleven zeolite membranes: Facile synthesis and tuneable wettability for highly efficient separation of oil/water mixtures[J]. 中国化学工程学报, 2023, 60(8): 242-252.
[8]	Wen Yu, Yiyang Bo, Yiling Luo, Xiyan Huang, Rixiang Zhang, Jiaheng Zhang. Enhancing effect of choline chloride-based deep eutectic solvents with polyols on the aqueous solubility of curcumin-insight from experiment and theoretical calculation[J]. 中国化学工程学报, 2023, 59(7): 160-168.
[9]	Zhonghao Li, Yuanyuan Yang, Huanong Cheng, Yun Teng, Chao Li, Kangkang Li, Zhou Feng, Hongwei Jin, Xinshun Tan, Shiqing Zheng. Measurement and model of density, viscosity, and hydrogen sulfide solubility in ferric chloride/trioctylmethylammonium chloride ionic liquid[J]. 中国化学工程学报, 2023, 59(7): 210-221.
[10]	Chaoyi Yin, Jingyuan Ma, Jian Qiu, Ruifang Liu, Long Ba. Mass-producible low-cost flexible electronic fabrics for azo dye wastewater treatment by electrocoagulation[J]. 中国化学工程学报, 2023, 59(7): 222-230.
[11]	Bing Liu, Yingjiao Li, Moses Arowo, Guangwen Chu, Yong Luo, Liangliang Zhang, Haikui Zou, Baochang Sun. Sulfonation of 1, 4-diaminoanthraquinone leuco by chlorosulfonic acid: Kinetics and process intensification[J]. 中国化学工程学报, 2023, 58(6): 163-169.
[12]	Yun-Zhang Liu, Lu-Yao Zhang, Dan He, Li-Zhen Chen, Zi-Shuai Xu, Jian-Long Wang. Solubility measurement, correlation and thermodynamic properties of 2, 3, 4-trichloro-1, 5-dinitrobenzene in fifteen mono-solvents at temperatures from 278.15 to 323.15 K[J]. 中国化学工程学报, 2023, 58(6): 224-233.
[13]	Linlin Su, Meijun Chen, Li Gong, Hua Yang, Chao Chen, Jun Wu, Ling Luo, Gang Yang, Lulu Long. Boost activation of peroxymonosulfate by iron doped K_2-xMn₈O₁₆: Mechanism and properties[J]. 中国化学工程学报, 2023, 57(5): 88-97.
[14]	Hu Chen, Ying Wang, Puyu Wang, Yongkang Lv. Assessing quinoline removal performances of an aerobic continuous moving bed biofilm reactor (MBBR) bioaugmented with Pseudomonas citronellolis LV1[J]. 中国化学工程学报, 2023, 57(5): 132-140.
[15]	Pengbao Lian, Lizhen Chen, Dan He, Guangyuan Zhang, Zishuai Xu, Jianlong Wang. Crystallization thermodynamics of 2,4(5)-dinitroimidazole in binary solvents[J]. 中国化学工程学报, 2023, 57(5): 173-182.