SCI和EI收录∣中国化工学会会刊

中国化学工程学报 ›› 2020, Vol. 28 ›› Issue (3): 824-831.DOI: 10.1016/j.cjche.2019.07.010

• Energy, Resources and Environmental Technology • 上一篇    下一篇

Influence of bio-inspired flow channel designs on the performance of a PEM fuel cell

Srinivasa Reddy Badduri, G. Naga Srinivasulu, S. Srinivasa Rao   

  1. Department of Mechanical Engineering, NIT, Warangal, Telangana 506004, India
  • 收稿日期:2019-04-10 修回日期:2019-06-04 出版日期:2020-03-28 发布日期:2020-06-11
  • 通讯作者: Srinivasa Reddy Badduri

Influence of bio-inspired flow channel designs on the performance of a PEM fuel cell

Srinivasa Reddy Badduri, G. Naga Srinivasulu, S. Srinivasa Rao   

  1. Department of Mechanical Engineering, NIT, Warangal, Telangana 506004, India
  • Received:2019-04-10 Revised:2019-06-04 Online:2020-03-28 Published:2020-06-11
  • Contact: Srinivasa Reddy Badduri

摘要: Performance of the proton exchange membrane fuel cell (PEMFC) is appreciably affected by the channel geometry. The branching structure of a plant leaf and human lung is an efficient network to distribute the nutrients in the respective systems. The same nutrient transport system can be mimicked in the flow channel design of a PEMFC, to aid even reactant distribution and better water management. In this work, the effect of bio-inspired flow field designs such as lung and leaf channel design bipolar plates, on the performance of a PEMFC was examined experimentally at various operating conditions. A PEMFC of 49 cm2 area, with a Nafion 212 membrane with a 40% catalyst loading of 0.4 mg·cm-2 on the anode side and also 0.6 mg·cm-2 on the cathode side is assembled by incorporating the bio-inspired channel bipolar plate, and was tested on a programmable fuel-cell test station. The impact of the working parameters like reactants' relative humidity (RH), back pressure and fuel cell temperature on the performance of the fuel cell was examined; the operating pressure remains constant at 0.1 MPa. It was observed that the best performance was attained at a back pressure of 0.3 MPa, 75 ℃ operating temperature and 100% RH. The three flow channels were also compared at different operating pressures ranging from 0.1 MPa to 0.3 MPa, and the other parameters such as operating temperature, RH and back pressure were set as 75 ℃, 100% and 0.3 MPa. The experimental outcomes of the PEMFC with bio-inspired channels were compared with the experimental results of a conventional triple serpentine flow field. It was observed that among the different flow channel designs considered, the leaf channel design gives the best output in terms of power density. Further, the experimental results of the leaf channel design were compared with those of the interdigitated leaf channel design. The PEMFC with the interdigitated leaf channel design was found to generate 6.72% more power density than the non-interdigitated leaf channel design. The fuel cell with interdigitated leaf channel design generated 5.58% more net power density than the fuel cell with non-interdigitated leaf channel design after considering the parasitic losses.

关键词: PEMFC, Interdigitated leaf channel design, Bio-inspired flow field design, Operating temperature, Relative humidity

Abstract: Performance of the proton exchange membrane fuel cell (PEMFC) is appreciably affected by the channel geometry. The branching structure of a plant leaf and human lung is an efficient network to distribute the nutrients in the respective systems. The same nutrient transport system can be mimicked in the flow channel design of a PEMFC, to aid even reactant distribution and better water management. In this work, the effect of bio-inspired flow field designs such as lung and leaf channel design bipolar plates, on the performance of a PEMFC was examined experimentally at various operating conditions. A PEMFC of 49 cm2 area, with a Nafion 212 membrane with a 40% catalyst loading of 0.4 mg·cm-2 on the anode side and also 0.6 mg·cm-2 on the cathode side is assembled by incorporating the bio-inspired channel bipolar plate, and was tested on a programmable fuel-cell test station. The impact of the working parameters like reactants' relative humidity (RH), back pressure and fuel cell temperature on the performance of the fuel cell was examined; the operating pressure remains constant at 0.1 MPa. It was observed that the best performance was attained at a back pressure of 0.3 MPa, 75 ℃ operating temperature and 100% RH. The three flow channels were also compared at different operating pressures ranging from 0.1 MPa to 0.3 MPa, and the other parameters such as operating temperature, RH and back pressure were set as 75 ℃, 100% and 0.3 MPa. The experimental outcomes of the PEMFC with bio-inspired channels were compared with the experimental results of a conventional triple serpentine flow field. It was observed that among the different flow channel designs considered, the leaf channel design gives the best output in terms of power density. Further, the experimental results of the leaf channel design were compared with those of the interdigitated leaf channel design. The PEMFC with the interdigitated leaf channel design was found to generate 6.72% more power density than the non-interdigitated leaf channel design. The fuel cell with interdigitated leaf channel design generated 5.58% more net power density than the fuel cell with non-interdigitated leaf channel design after considering the parasitic losses.

Key words: PEMFC, Interdigitated leaf channel design, Bio-inspired flow field design, Operating temperature, Relative humidity