Structural optimization of a settler via CFD simulation in a mixer-settler

doi:10.1016/j.cjche.2020.01.010

中国化学工程学报 ›› 2020, Vol. 28 ›› Issue (4): 995-1015.DOI: 10.1016/j.cjche.2020.01.010

• Fluid Dynamics and Transport Phenomena • 上一篇下一篇

Structural optimization of a settler via CFD simulation in a mixer-settler

Sishi Ye^1,2, Qiao Tang¹, Yundong Wang¹, Weiyang Fei¹

1 The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, China;
2 SINOPEC Research Institute of Petroleum Processing, Beijing 100083, China

收稿日期:2019-04-15 修回日期:2020-01-10 出版日期:2020-04-28 发布日期:2020-07-27
通讯作者: Yundong Wang
基金资助:
This researchwas carried out under the National Basic Research Program of China (No. 2012CBA01203), National Natural Science Foundation of China (No. 21636004) and the Specialized Research Fund for Doctoral Program of Higher Education of MOE of China (No. 20130002110018) in the State Key Laboratory of Chemical Engineering of Tsinghua University, Beijing, China. The authors gratefully acknowledge these grants.

Structural optimization of a settler via CFD simulation in a mixer-settler

Sishi Ye^1,2, Qiao Tang¹, Yundong Wang¹, Weiyang Fei¹

1 The State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, China;
2 SINOPEC Research Institute of Petroleum Processing, Beijing 100083, China

Received:2019-04-15 Revised:2020-01-10 Online:2020-04-28 Published:2020-07-27
Contact: Yundong Wang
Supported by:
This researchwas carried out under the National Basic Research Program of China (No. 2012CBA01203), National Natural Science Foundation of China (No. 21636004) and the Specialized Research Fund for Doctoral Program of Higher Education of MOE of China (No. 20130002110018) in the State Key Laboratory of Chemical Engineering of Tsinghua University, Beijing, China. The authors gratefully acknowledge these grants.

摘要/Abstract

摘要： This work is aimed at optimizing a settler structure in a mixer-settler. Two different aspects have been considered. Firstly, the flowcharacteristics of a settler have been examined by computational fluid dynamics (CFD) simulation with various agitation speeds of the mixer, as well as organic phase volume fractions ranging from 0.075 to 0.6. The aqueous and organic phase turbulent flow fields were measured by particle image velocimetry (PIV) technique to verify the CFD simulation. Two organic phases with different physical properties were assessed in the CFD simulation to simulate the liquid-liquid systems related to rare earth element extraction, i.e., 0.072 mol·L^-1 P507/kerosene and 1.8 mol·L^-1 P507/kerosene. Secondly, the CFD simulation was carried out in a settler equipped with baffles. The effects of number and location of the baffle in the settler on flow features and entrainments of the aqueous and organic outlet were analyzed. Meanwhile, different settler/mixer volume ratios were also examined. By analyses and comparisons, an optimal design for settler was proposed. CFD can provide a significant guidance to better mixer-settler design.

关键词: Settler, Liquid-liquid, CFD RANS equations, Optimization

Abstract: This work is aimed at optimizing a settler structure in a mixer-settler. Two different aspects have been considered. Firstly, the flowcharacteristics of a settler have been examined by computational fluid dynamics (CFD) simulation with various agitation speeds of the mixer, as well as organic phase volume fractions ranging from 0.075 to 0.6. The aqueous and organic phase turbulent flow fields were measured by particle image velocimetry (PIV) technique to verify the CFD simulation. Two organic phases with different physical properties were assessed in the CFD simulation to simulate the liquid-liquid systems related to rare earth element extraction, i.e., 0.072 mol·L^-1 P507/kerosene and 1.8 mol·L^-1 P507/kerosene. Secondly, the CFD simulation was carried out in a settler equipped with baffles. The effects of number and location of the baffle in the settler on flow features and entrainments of the aqueous and organic outlet were analyzed. Meanwhile, different settler/mixer volume ratios were also examined. By analyses and comparisons, an optimal design for settler was proposed. CFD can provide a significant guidance to better mixer-settler design.

Key words: Settler, Liquid-liquid, CFD RANS equations, Optimization

Sishi Ye, Qiao Tang, Yundong Wang, Weiyang Fei. Structural optimization of a settler via CFD simulation in a mixer-settler[J]. 中国化学工程学报, 2020, 28(4): 995-1015.

Sishi Ye, Qiao Tang, Yundong Wang, Weiyang Fei. Structural optimization of a settler via CFD simulation in a mixer-settler[J]. Chinese Journal of Chemical Engineering, 2020, 28(4): 995-1015.

参考文献

[1] G.X. Xu, C.Y. Yuan, Solvent Extraction of Rare Earth, Science Press, Beijing, 1987.
[2] M.B. Machado, J.R. Nunhez, D. Nobes, et al., Impeller characterization and selection:Balancing efficient hydrodynamics with process mixing requirements, AIChE J. 58(8) (2012) 2573-2588.
[3] D. Patel, F. Ein-Mozaffari, M. Mehrvar, Effect of impeller type on continuous-flow mixing of non-Newtonian fluids in stirred vessels through dynamic tests, Can. J. Chem. Eng. 90(2) (2012) 290-298.
[4] F. Cabaret, L. Fradette, P.A. Tanguy, New turbine impellers for viscousmixing, Chemical Engineering & Technology 31(12) (2008) 1806-1815.
[5] C. Srilatha, A.R. Savant, A.W. Patwardhan, et al., Head-flow characteristics of pumpmix mixers, Chem. Eng. Process. Process Intensif. 47(9-10) (2008) 1678-1692.
[6] M. Simon, S.A. Schmidt, H.J. Bart, The droplet population balance model-estimation of breakage and coalescence, Chemical Engineering & Technology 26(7) (2003) 745-750.
[7] R.E.P. Cunha, M. Fortuny, C. Dariva, et al., Mathematical modeling of the destabilization of crude oil emulsions using population balance equation, Ind. Eng. Chem. Res. 47(18) (2008) 7094-7103.
[8] L.L. Liu, D.G. Wang, J. Zhou, Application of three-dimensional numerical simulation in hydraulic settler, Pollution Prevention Technique 17(1) (2004) 11-13.
[9] K. Takata, R. Kurose, Influence of density flow on treated water turbidity in a sedimentation basin with inclined plate settler, Water Sci. Technol. Water Supply 17(4) (2017) 1140-1148.
[10] A. Misra, L.G.M. de Souza, M. Illner, Simulating separation of amultiphase liquid-liquid system in a horizontal settler by CFD, Chem. Eng. Sci. 167(2017) 242-250.
[11] Y. Zou, Process Intensification of Mixer-settler, Tsinghua University, Beijing, 2014.
[12] G.L. Lane, K. Mohanarangam,W. Yang, Flow pattern assessment and design optimisation for an industrial solvent extraction settler through in situ measurements and CFD modelling, Chem. Eng. Res. Des. 109(1) (2016) 200-214.
[13] G. Lane, K.Mohanarangam,W. Yang, Assessment of the flow pattern in a solvent extraction settler, Ninth International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Australia, 2012, Dec 10-12.
[14] M. Alonso-Martínez, A. Navarro-Manso, D. Castro-Fresno, Improvement of a system for catchment, pretreatment, and treatment of runoff water using PIV tests and numerical simulation, Journal of Irrigation and Drainage Engineering-ASCE 140(8) (2014) 1-8.
[15] D. Stanbridge, J. Sullivan, One Example of How offshore Oil & Gas industry technology can be of Benefit to Hydrometallurgy:Second International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Australia, 1999 Dec 6-8.
[16] G. Miller, Design of Mixer-settlers to Maximize Performance:Proceedings ALTA Copper, Melbourne, May 102006.
[17] R. Sadeghi, A. Mohebbi, A. Sarrafi, CFD simulation and optimization of the settler of an industrial copper solvent extraction plant:a case study, Hydrometallurgy 106(3-4) (2011) 148-158.
[18] B.Y. Sun, Q. Zhao, Y.M. Jiang, Study on the liquid-liquid separation in settler, Journal of East China Chemical Institute 12(4) (1986) 441-448.
[19] G.Z. Yu, Z.S. Mao, Sedimentation and coalescence profiles in liquid-liquid batch settling experiments, Chemical Engineering & Technology 27(4) (2004) 407-413.
[20] S. Rajeswari, B. Suhasini, M.P. Antony, Phase separation time measurement using optical method for solvent characterization, Sep. Sci. Technol. 47(10) (2012) 1498-1506.
[21] X.J. Quan, L.M. Su, J.Y. Chen, Study of double mixing chamber in extraction device I:residual time distribution of continuous phase, Journal of Chengdu University of Science and Technology 27(4) (1995) 45-51.
[22] I.E. Lewis, F.W. Han, S.L. Wei, A mixer-setter designed to reduce entrainments and investment cost, Hydrometallurgy 2(1983) 69-70.
[23] I.E. Lewis, F.W. Han, S.L. Wei, A mixer-setter designed to reduce entrainments and investment cost (continued), Hydrometallurgy 3(1983) 71-74.
[24] S.K. Panda, K.K. Singh, K.T. Shenoy, Numerical simulations of liquid-liquid flow in a continuous gravity settler using OpenFOAM and experimental verification, Chem. Eng. J. 310(1) (2017) 120-133.
[25] S.K. Panda, V.V. Buwa, Effects and internals of a continuous gravity settler on liquid-liquid separation, Industrial Engineer Chemical Research 56(46) (2017) 13929-13944.
[26] M.O. Shabani, M. Alizadeh, A. Mazahery, Fluid flow characterization of liquid-liquid mixing in mixer-settler, Eng. Comput. 27(4) (2011) 373-379.
[27] M.O. Shabani, A.Mazahery,M. Alizadeh, Computational fluid dynamics (CFD) simulation of effect of baffles on separation in mixer settler, Int. J. Min. Sci. Technol. 22(5) (2012) 703-706.
[28] S.C.Wang, T.A. Zhang, Q.Y. Zhao, Settling performance of novel mixer-settler, Journal of Northeastern University (Natural Science Edition) 35(4) (2014) 548-550.
[29] S.C.Wang, T.A. Zhang, Q.Y. Zhao, Experimental study on aqueous phase entrainment in a mixer-settler with double stirring mode, China Petroleum Processing & Petrochemical Technology 15(2) (2013) 59-62.
[30] S.S. Ye, Q. Tang, Y.D.Wang,W.Y. Fei, PIV measurement and CFD simulation of liquidliquid flow of a settler in rare earths solvent extraction mixer-settler, Journal of Heat and Fluid Flow 62(2016) 568-576.
[31] S.S. Ye, Q. Tang, Y.D. Wang, Physical properties measurements and CFD simulations in settler of different P507-kerosene systems, CIESC Journal 67(2) (2016) 458-468(in Chinese).

Structural optimization of a settler via CFD simulation in a mixer-settler

Structural optimization of a settler via CFD simulation in a mixer-settler

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Chuang Liang, Zhihao Liu, Baochang Sun, Haikui Zou, Guangwen Chu. Improvement in discharge characteristics and energy yield of ozone generation via configuration optimization of a coaxial dielectric barrier discharge reactor[J]. 中国化学工程学报, 2023, 60(8): 61-68.
[2]	Yaran Bu, Changchun Wu, Lili Zuo, Qian Chen. The calculation and optimal allocation of transmission capacity in natural gas networks with MINLP models[J]. 中国化学工程学报, 2023, 59(7): 251-261.
[3]	Danlei Chen, Yiqing Luo, Xigang Yuan. Cascade refrigeration system synthesis based on hybrid simulated annealing and particle swarm optimization algorithm[J]. 中国化学工程学报, 2023, 58(6): 244-255.
[4]	Jikai Dong, Bing Wang, Xinjie Wang, Chenxi Cao, Shikuan Chen, Wenli Du. Optimization of sensor deployment sequences for hazardous gas leakage monitoring and source term estimation[J]. 中国化学工程学报, 2023, 56(4): 169-179.
[5]	Dandan Ren, Shanshan Xiang, Yuwen Yan, Ruiying Kong, Xingchu Gong. Design and optimization of purification process of sinomenine hydrochloride[J]. 中国化学工程学报, 2023, 55(3): 63-72.
[6]	Yingjun Lin. Whole-process optimization for industrial production of glucosamine sulfate sodium chloride based on QbD concept[J]. 中国化学工程学报, 2023, 54(2): 153-161.
[7]	Shan Liu, Wenqi Zhong, Xi Chen, Li Sun, Lukuan Yang. Multiobjective economic model predictive control using utopia-tracking for the wet flue gas desulphurization system[J]. 中国化学工程学报, 2023, 54(2): 343-352.
[8]	Chao Zhang, Youzhi Liu, Weizhou Jiao, Hongyan Shen, Xigang Yuan, Shengkun Jia. An optimization method for enhancement of gas–liquid mass transfer in a bubble column reactor based on the entropy generation extremum principle[J]. 中国化学工程学报, 2023, 53(1): 83-88.
[9]	Monique Juna L. Leite, Ingrid Ramalho Marques, Mariane Carolina Proner, Pedro H.H. Araújo, Alan Ambrosi, Marco Di Luccio. Catalytically active membranes for esterification: A review[J]. 中国化学工程学报, 2023, 53(1): 142-154.
[10]	Xinqiang You, Kai Zhao, Ling Li, Ting Qiu. Ionic liquids as entrainer in extractive distillation for effectively separating 1-propanol–water azeotropic mixture[J]. 中国化学工程学报, 2022, 49(9): 224-233.
[11]	Jia Ren, Zengqiang Chen, Mingwei Sun, Qinglin Sun, Zenghui Wang. Proportion integral-type active disturbance rejection generalized predictive control for distillation process based on grey wolf optimization parameter tuning[J]. 中国化学工程学报, 2022, 49(9): 234-244.
[12]	Na Wang, Chong Peng, Zhenmin Cheng, Zhiming Zhou. Molecular reconstruction of vacuum gas oils using a general molecule library through entropy maximization[J]. 中国化学工程学报, 2022, 48(8): 21-29.
[13]	Chun Deng, Xuantong Lu, Qixin Zhang, Jian Liu, Jui-Yuan Lee, Xiao Feng. Fuzzy optimization design of multicomponent refinery hydrogen network[J]. 中国化学工程学报, 2022, 48(8): 125-139.
[14]	Zhigang Xu, Xiongfei Jin, Tao Zhou, Qian Zou, Longcheng Liu, zhongbo Wang, Hanbing Sheng, Huasheng Xie. Preparation of aldoxime through direct ammoximation using titanium silicalite-1 catalyst[J]. 中国化学工程学报, 2022, 47(7): 11-17.
[15]	Junru Liu, Rui Hu, Xinlei Liu, Qunfeng Zhang, Guanghua Ye, Zhijun Sui, Xinggui Zhou. Modeling of propane dehydrogenation combined with chemical looping combustion of hydrogen in a fixed bed reactor[J]. 中国化学工程学报, 2022, 47(7): 165-173.